Luminescence characteristics of Dy3+ activated Na 2Sr 2Mg (BO 3)2F 2: Dy 3+ phosphor

In this paper, we have reported a new Na ₂Sr ₂Mg (BO ₃)₂F ₂:Dy ³⁺ thermoluminescence (TL) phosphor prepared via the wet chemical method. Prepared phosphor was characterized by X-ray powder diffraction, photoluminescence (PL), TL and scanning electronmicroscopy techniques. The scanning electronmicroscopic image of Na ₂Sr ₂Mg (BO ₃)₂F ₂:Dy ³⁺ phosphor confirms the micron size of particles. Under the PL study, the characteristic emission spectrum of Dy ³⁺ corresponding to ⁴F _9/2→⁶H _15/2 (481 nm) and ⁴F _9/2→⁶H _13/2 (576 nm) transitions was observed. The TL property of the as prepared phosphor was also found to be good. TL intensity of Na ₂Sr₂Mg(BO ₃)F ₂:Dy ³⁺ phosphors at 0.99 kGy exposure of γ-irradiations was compared with standard CaSO ₄:Dy phosphor. It was seen that TL intensity of Na ₂Sr ₂Mg (BO ₃)₂F ₂: Dy ³⁺ phosphors is 1.1 times less compared with the standard CaSO ₄:Dy TL dosimeter phosphor. The kinetic parameters are also discussed in detail. The values of activation energy E (eV) and frequency factor S (s ^?1) were found to be 0.57 eV and 1.25×10⁶ s^?1, respectively.     

Obionin B: An o-pyranonaphthoquinone decaketide from an unidentified fungus (MSX 63619) from the Order Pleosporales

A fungal extract (MSX 63619), from the Mycosynthetix library of over 50,000 fungi, displayed promising cytotoxicity against a human tumor cell panel. Bioactivity-directed fractionation led to the isolation of an o-pyranonaphthoquinone decaketide, which we termed obionin B (1). The structure of 1 was deduced via spectroscopic and spectrometric techniques. The IC₅₀ value of 1 was moderate, ranging from 3 to 13 μM, depending on the cell line tested.     

Development of a novel 96-microwell assay with high throughput for determination of olmesartan medoxomil in its tablets

A novel 96-microwell-based spectrophotometric assay has been developed and validated for determination of olmesartan medoxomil (OLM) in tablets. The formation of a colored charge-transfer (CT) complex between OLM as a n-electron donor and 2, 5-dichloro-3, 6-dihydroxy-1, 4-benzoquinone (p-chloranilic acid, pCA) as a π-electron acceptor was investigated, for the first time, and employed as a basis in the development of the proposed assay. The proposed assay was carried out in 96-microwell plates. The absorbance of the colored-CT complex was measured at 490 nm by microwell-plate absorbance reader. The optimum conditions of the reaction and the analytical procedures of the assay were established. Under the optimum conditions, linear relationship with good correlation coefficient was found between the absorbance and the concentration of OLM in the range of 1-200 μg ml^-1. The limits of detection and quantitation were 0.3 and 1 μg ml^-1, respectively. No interference was observed from the additives that are present in the pharmaceutical formulation or from hydrochlorothiazide and amlodipine that are co-formulated with OLM in some formulations. The assay was successfully applied to the analysis of OLM in tablets with good accuracy and precision. The assay described herein has great practical value in the routine analysis of OLM in quality control laboratories, as it has high throughput property, consumes minimum volume of organic solvent thus it offers the reduction in the exposures of the analysts to the toxic effects of organic solvents, and reduction in the analysis cost by 50-fold. Although the proposed assay was validated for OLM, however, the same methodology could be used for any electron-donating analyte for which a CT reaction can be performed.     

Self-Focusing/Defocusing of Chirped Gaussian Laser Beam in Collisional Plasma with Linear Absorption

This paper presents an investigation on the self-focusing/defocusing of chirped Gaussian laser beam in collisional plasma with linear absorption. We have derived the differential equation for the beam width parameter by using WKB and paraxial approximations and solved it numerically. The effect of chirp and other laser plasma parameters is seen on the behavior of beam width parameter with dimensionless distance of propagation. The results are discussed and presented graphically. Our simulation results show that the amplitude of oscillations decreases with the distance of propagation. Due to collisional frequency, the laser beam shows fast divergence which can be minimized by the introduction of chirp parameter. The chirp decreases the effect of defocusing and increases the ability of self-focusing of laser beam in collisional plasma.     

Interaction Characterization of a Tyrosine Kinase Inhibitor Erlotinib with a Model Transport Protein in the Presence of Quercetin: A Drug–Protein and Drug–Drug Interaction Investigation Using Multi-Spectroscopic and Computational Approaches

The interaction between erlotinib (ERL) and bovine serum albumin (BSA) was studied in the presence of quercetin (QUR), a flavonoid with antioxidant properties. Ligands bind to the transport protein BSA resulting in competition between different ligands and displacing a bound ligand, resulting in higher plasma concentrations. Therefore, various spectroscopic experiments were conducted in addition to in silico studies to evaluate the interaction behavior of the BSA-ERL system in the presence and absence of QUR. The quenching curve and binding constants values suggest competition between QUR and ERL to bind to BSA. The binding constant for the BSA-ERL system decreased from 2.07 × 10⁴ to 0.02 × 10² in the presence of QUR. The interaction of ERL with BSA at Site II is ruled out based on the site marker studies. The suggested Site on BSA for interaction with ERL is Site I. Stability of the BSA-ERL system was established with molecular dynamic simulation studies for both Site I and Site III interaction. In addition, the analysis can significantly help evaluate the effect of various quercetin-containing foods and supplements during the ERL-treatment regimen. In vitro binding evaluation provides a cheaper alternative approach to investigate ligand-protein interaction before clinical studies.     

Dissipation and gas chromatographic method for the determination of profenofos residues in/on green pea and cucumber

Herein we report a novel, accurate and cost-effective gas chromatography method for the determination of average deposits of profenofos on green pea and cucumber following good agricultural practices. Additionally the risk assessment, dissipation and waiting period for profenofos were determined. The average initial deposits (2 h after spraying) of profenofos in/on green pea and cucumber were 3.41 and 3.62 mg kg⁻¹ respectively following two applications at a 10 day interval of profenofos 50EC formulation. Profenofos residues on both of the substrates were below the detection limit of 0.05 mg kg⁻¹ after 20 days at the recommended dosage. For risk assessment studies, the 20th day will be safe for consumers for consumption of green peas. The gas chromatography method was validated according to the SANTE guidelines using the various analytical parameters: linearity, accuracy, detection and quantification limits. The developed method is simple, selective and repeatable and can be extended for profenofos-based standardization of pesticide formulations for green pea/cucumber and their use as pesticides.     

Transition from antagonistic to synergistic interaction in mixed micellar system by increase in alkyl chain length of alkyl trimethylammonium bromide

Herein, the electrical conductivity technique used to measure the critical micelle concentration (cmc) for pure cationic surfactants (Dodecyl/cetyltrimethylammonium bromides) and phenothiazine drug (Promethazine hydrochloride), as well as their different mole fractions in 10^?3 ?mol/kg 1-methyl-3-octylimidazolium chloride (C₈mim.Cl) at different temperatures. By using the cmc values the regular solution theory used to evaluate the micellar mole fraction for DTAB/CTAB-PMT mixed systems. The clint's model used to calculate the ideal critical micelle concentration (cmc1) that helps to evaluate the ideal micellar mole fraction for studied mixed systems, both explain the deviation from ideality. In addition, interaction parameter β^m helps to confirm the nature of interaction (either antagonistic or synergistic) for the studied systems. The calculated parameters confirm a transition in the binding nature from antagonistic to synergistic with the increase in alkyl chain length of cationic surfactant i.e., component of the binary mixed system. The ease of micellization for the studied systems discussed by the standard Gibb's energy of micellization ($\Delta G_m^0$), as well as the standard enthalpy and standard entropy of micellization were ($\Delta H_m^0$) and ($\Delta S_m^0$), respectively to discuss the stability of the studied systems.     

Phase transition in LAMOX type compounds

La₂Mo₂O₉ (LMO) was synthesized at lower temperature 973 K (LT-phase) by ceramic route. Differential thermal analysis (DTA) scan of LT-phase of LMO showed α→β transition at 843 K during heating and β→α conversion via a metastable γ-phase during cooling. This was also confirmed by thermo-dilatometry and impedance spectroscopy. La₂Mo_1.95V_0.05O_9-δ (LMVO), La_1.96Sr_0.04Mo₂O_9-δ (LSMO) and La_1.96Sr_0.04Mo_1.95V_0.05O_9-δ (LSMVO) were prepared in a similar way. These compounds exhibited α→β transition on heating with shift in transition temperature, but the existence of γ-phase during cooling disappeared. Substitution increased the ionic conductivity of α-phase and reduced that of β-phase.     

Crystal structure,electrical conductivity,thermal expansion and compatibility studies of Co-substituted lanthanum strontium manganite system

La_0.76Sr_0.19Mn_1?xCo_xO_3±δ, LSMCo_x (0 ≤ x ≤ 1) perovskite oxides were synthesized by conventional ceramic route. The effect of Co substitution for Mn on the crystal structure, electrical conductivity and thermal expansion properties was investigated. XRD indicated rhombohedral symmetry for the studied compositions at 1673 K. The lattice parameters so determined showed significant reduction in cell volume, which is attributed to smaller ionic radii of Co³⁺ ions. The results of electrical conductivity data indicated that the conductivity mechanism is by thermally activated hopping of small polarons between localized states corresponding to Mn or Mn and Co sites of different valence value. The conductivity decreases at all temperatures up to 40 mol% Co substitution while the energy of activation increases. This is possibly due to an increase in Jahn–Teller distortion, at an extent higher than the increase of the concentration of charge carriers. Thermal expansion coefficient values in the series increase with increasing Co content which has been explained on the basis of the changes in the spin states of the Co ions and the consequent changes in the ionic size with temperature. Solution route synthesis produces fine-size particles with better properties, consequently one composition from the above having enhanced requisite properties, viz. La_0.76Sr_0.19Mn_0.8Co_0.2O_3±δ was synthesized by sol–gel route. The sol–gel synthesized compound had crystallite size of ～30 nm at 1173 K obtained using Scherrer's equation. Thus the potential of these compounds as cathodes for solid oxide fuel cells (SOFCs) have been evaluated.As Ce_0.8RE_0.2O_2?δ (RE = Sm, Gd) are being investigated for their use as electrolytes in SOFCs, their mechanical compatibility as well as chemical compatibility with the potential cathode material from the above LSMCo_x series was also studied.