负载型纳米Ni催化剂用于对氯硝基苯选择加氢

以TiO2为载体,N iB为诱导剂,粉末化学镀法制备了负载型纳米N i催化剂.通过TEM、HRTEM、XRD和ICP技术对催化剂物性进行了表征.结果表明,碱性镀液可使载体表面均匀负载微晶结构纳米N i团簇,尺度为35nm左右.该负载型纳米N i在对氯硝基苯选择加氢反应中表现出很高催化加氢活性,并能有效抑制脱氯,达到了工业骨架镍水平.由酸性镀液得到的负载型非晶态纳米N i-P合金具有较弱的催化对氯硝基苯加氢活性.反应温度对反应时间和脱氯率有明显影响.     

主体分子六次甲基四胺与客体分子二氯化六水合钴(Ⅱ)和结晶水包结物的研究

用X射线单晶衍射分析法研究主体分子六次甲基四胺与客体分子二氯化六水合钴（Ⅱ）和结晶水包结物晶体结构。其分子式为［（CH2）6N4］2·［（Co（H2O）6］Cl2·4H2O，Mr＝59038。晶体属三斜晶系，空间群为P1。晶胞参数：3341个衍射点，其中3148个独立衍射点，2754（F0＞6σ（F0））为可观察反射点。在晶胞内，客体分子和结晶水形成氢键：，客体分子与主体分子形成氢键晶胞之间形成氢键晶胞之内和晶胞之间主体分子和客体分子以及结晶水以氢键和范德华力相联系形成稳定的晶格。     

一种新型联萘基旋光共轭聚合物的圆二色谱和圆偏振荧光光谱

众所周知 ,聚合物的光电性质依赖于聚合物链的构象和 (或 )组成 ,通过在聚合物上引入手性单元 ,采用圆二色谱 ( CD)和圆偏振荧光光谱 ( CPL)等方法可表征聚合物结构 [1] .近年来 ,由于圆偏振光可用作光数据存储和液晶显示器背景光 [2 ] ,人们开始注重共轭聚合物圆偏振光材料的研究 .共轭聚合物的光致和电致圆偏振光的现象由一种带手性侧链的聚噻吩[3 ] 和一种带手性侧链的聚 (对苯撑乙烯 ) [4 ]产生 ,但它们的圆偏振荧光度 (用不对称因子 glum=2 ( IL-IR) / ( IL+IR)表示 ,IL 和 IR 分别指左圆偏振光强度和右圆偏振光强度 )相对较低 …     

1-(2,6-二氯-4-硝基苯)-3-(4-硝基苯)-三氮烯与铜的显色反应研究及其应用

研究了新试剂1-(2,6-二氯-4-硝基苯)-3-(4-硝基苯)-三氮烯(DCNPNPT)与铜(Ⅱ)显色反应。在表面活性剂Tween-80存在下,pH 9.0～10.0范围内,铜(Ⅱ)与DCNPNPT形成1:4黄色配合物,其最大吸收波长为460nm,用双峰双波长法测定,表观摩尔吸光系数为1.I×10~5L·mol~(-1)·cm~(-1)。铜(Ⅱ)含量在0～240μg·L~(-1)范围内符合比耳定律。拟定方法用于铜矿和环境水标样中铜的测定,结果满意。     

溶胶-凝胶法制备还原态K-Co-Mo催化剂的合成醇性能

应用溶胶-凝胶法制备了还原态K-Co-Mo催化剂, 比较了不同的组分和不同的反应条件对合成醇性能的影响。实验结果表明，适量钾和钴助剂的添加能显著提高催化剂合成醇的性能，尤其是提高了C2+醇的选择性。此外，反应温度、压力以及空速对合成醇影响明显，升高温度可以提高催化反应中低碳醇的收率，但选择性下降；增加压力和空速可以提高低碳醇的收率和选择性，对合成低碳醇有利。在230 ℃，6.0 MPa，14 400 h－1条件下，催化剂合成低碳醇的收率为375.4 g/kg·h，选择性为70.2%，C1OH/C2+OH为0.48。     

PREPARATION OF POLY（METHYL METHACRYLATE）/LAYERED DOUBLE HYDROXIDES NANOCOMPOSITES via in situ SOLUTION POLYMERIZATION

An exfoliated layered double hydroxides/poly(methyl methacrylate)(LDHs/PMMA)nanocomposite was prepared by in situ solution polymerization of methyl methacrylate(MMA)in the presence of 4-vinylbenzenesulfonate intercalated LDHs(MgAl-VBS LDHs).MgAl-VBS LDHs was prepared by the ion exchange method,and the structure and composition of the MgA1-VBS LDHs were determined by X-ray diffraction(XRD),infrared spectroscopy and elemental analysis.XRD and transmission electron microscopy(TEM)were employed to examine the structure of LDHs/PMMA nanocomposite.It was indicated that the LDHs layers were well exfoliated and dispersed in the PMMA matrix.The grafting of PMMA onto LDHs was confirmed by the extraction result and the weight fraction of grafted PMMA increased as the weight fraction of LDHs in the nanocomposites increased.     

One-step Beckmann Rearrangement from Ketones and Hydroxylamine in Dry Media under Microwave Irradiation

TheBeckInannrearrangement,theacid-mediatedisomerizationofoximestoamides,wasfirstdiscoveredinl886l.Asoneoftheoldestandmostfamiliartransformationsinorganicchemistry,ithasbeenwidelystudiedandagreatvarietyofmethodstoconductthistfansformationhavebeenreported'.However,mostofthesemethodswerecarriedoutbyusingalargeamountofsolventswithlongreactiontime.Whatismore,thepriorpreparationofthecorrespondingketoximesisusuallyrequired,whichmakestheseprocessesinconvenientandlessattractive.Bytakingadvantageofboth…     

POLYURETHANE-POLYSTYRENE INTERPENETRATING NETWORKS

A series of polyurethane based on liquid chloroprene-hydroxyethyl methacrylate copolymer(CP-co-HEMA)-polystyrene (PS) interpenetrating polymer networks (PU-PS IPN) were synthe-sized. Some physical properties were examined and density behavior was investigated. In 60%polyurethane (PU) system, the tensile strength and density increased greatly. Transmission electronmicrographs showed that the phase separation existed and the sizes of PS domains dispersed in PUphase were about 500-4,000 A. In comparison with correlative PU-PMMA IPN system, whichhas the higher compatibility, this system showed an extensive phase separation and clear boundaries.There was no phase inversion observed even for 60% PU system in which PS was still the dispersed phaseand PU the continuous phase. This was due to the relatively faster rate of formation of PU than thatof ST polymerization.     

Synthesis and Characterization of the Chiral Skeleton Cluster [NiRuMo(CO)_5(μ_3-S)(η~5-C_5H_5)(η~5-C_5H_4COCH_3)]

1 INTRODUCTION The chemistry of transition metal cluster has enjoyed an exceptional growth since the mid 1970s[1, 2], especially in recent years the structural and bonding aspects of mixed-metal tetrahedral skeleton clusters have been extensively studied[3]. One important reason is that such chiral cluster can induce an asymmetric catalysis potentially. In our research group, considerable efforts have been directed to the synthesis of chiral tetrahedral clusters containing four different…     

MAA存在下VAc/BA核壳乳液聚合过程中的胶粒形态研究

用ＴＥＭ和电位滴定法对不同配方和工艺条件得到的胶粒形态结构和羧基分别进行了表征。结果表明：加入甲基丙烯酸有利于胶粒的稳定和形成规则的核壳胶粒。半连续加料不会形成完全反转的核壳结构,但是,核层在反应过程中由于聚合物簇的迁移会造成形变。由于胶粒中聚合物浓度高,粘度大,因而胶粒形态变化受动力学影响甚大,羧基分布主要是由动力学确定的。