阻抑动力学光度法测定稀土氧化物中痕量镧(Ⅲ)

阻抑动力学光度法是测定痕量镧(Ⅲ)的新方法.在十六烷基三甲基溴化铵(CT-MAB)存在下,H3PO4介质中痕量镧(Ⅲ)对溴酸钾-氧化考马斯亮蓝的褪色反应具有阻抑作用.通过研究试剂用量、反应温度、反应时间和干扰离子等因素的影响,证明阻抑动力学光度法可以用于稀土氧化物中痕量镧(Ⅲ)的测定,测定结果可靠.     

二(咪唑基)苯及戊二酸根构筑的三维镉配位聚合物的合成、晶体结构与荧光性质

用水热法合成了一个新的镉配位聚合物[Cd(BIMB)0.5(glu)]n(BIMB=1,4-二(咪唑基)苯,H2glu=戊二酸),用红外,元素分析进行了表征。X射线单晶衍射分析表明配位聚合物属于单斜晶系,P21/c空间群,a=0.822 06(5)nm,b=0.774 38(5)nm,c=1.877 93(10)nm,β=107.966°,V=1.137 nm3,Z=4,F(000)=684。在配合物中,相邻的镉原子通过2个戊二酸连接成一维链状结构,链状结构通过另一戊二酸拓展成二维层状结构,相邻二维层状结构进一步由BIMB配体拓展成三维骨架结构。热重分析表明配合物具有较好的稳定性,荧光光谱分析表明配合物具有较好的荧光性质。     

氧化石墨烯/麦饭石分离富集-火焰原子吸收法测定水中镉

通过浸渍法制备了新型纳米氧化石墨烯/麦饭石(GO/MFS)复合吸附材料,并用于镉的分离富集。以火焰原子吸收法为检测手段,研究了GO/MFS复合吸附材料对水中Cd(Ⅱ)的吸附性能。结果表明:当pH为9.0时,GO/MFS复合吸附材料用量为20mg,振荡10min,Cd(Ⅱ)可被吸附材料定量富集,最大吸附容量为111.1mg/g。吸附等温线均能符合Langmuir和Freundlich等温线模型,说明该吸附体系是一个单层覆盖与多层吸附相结合的模式。被吸附的Cd(Ⅱ)可用0.15mol/L HNO3定量洗脱。方法测定Cd(Ⅱ)的线性范围为0.04～2.0mg/L,检出限为9.6μg/L;对40μg/LCd(Ⅱ)测定的相对标准偏差(RSD)为2.5%(n=9)。该方法具有操作简单、分析时间短、线性范围宽等优点。用该法对自来水中Cd(Ⅱ)进行加标测定,回收率101%～103%。     

Binding Equilibrium Studies Between Co2+ and HAS or BSA

Introduction Up to now,the interactions of Cu2+,Ni2+ and Zn2+ with serum albumin have been extensively studied[1-3].However,the interaction of serum with Co2+ has rarely been studied.Our study of Co2+-HSA by means of charge transfer spectra indicated that the metal center took an octahedron configuration and the binding site was probably located at the tripeptide segment of the N-terminal of albumin[4].Sadler et al.[5]has reported that the binding site of Co2+ in HSA is located at the tripeptide segment of HSA involving the four nitrogen atoms and a carboxyl oxygen atom of Aspl.In this paper the interaction of HSA and BSA with Co2+ at physiological pH is further studied by equilibrium dialysis.The number of binding sites and the cooperation among the binding sites are reported.According to the equilibrium dialysis results and the study of competition between Co2+ and Cu2+,Ca2+ or Zn2+ to be bound to HSA or BSA,it is suggested that there are three strong binding sites in both HSA and BSA.The possible locations of the strong binding sites of Co2+ in HSA and BSA have also been determined.     

N-二茂铁甲酰基-芳基羟胺及其铜(Ⅱ)螯合物的合成与表征

二茂铁甲酰羟胺衍生物分子中含有N-羟基和α-羰基,可与过渡金属形成螯合物.我们试图将该类螯合物用作复合固体推进剂的燃速调节剂,为此,研究了该类化合物的合成方法及其性质,并使它们与铜(Ⅱ)螯合制成铜螯合物.     

N-二异丙基磷酰基氨基酸的电子电离和快原子轰击质谱的比较

N-二异丙基磷酰基(DIPP)氨基酸的快原子轰击(FAB)和电子电离(EI)质谱都有相似的丢失两分子丙烯和一分子甲酸的碎裂过程.在FAB中,连续失掉两个丙烯,然后脱去甲酸的过程较为有利;在EI中则主要为先脱去甲酸,随后失去丙烯,本文对DIPP-氨基酸的FAB和EI质谱碎裂历程进行了比较,对分子离子峰的形式与碎裂方式的关系进行了讨论.     

基于纳米金Core-satellites等离子体耦合增强效应的汞离子光纤传感器的研究

以DNA杂交双链为联接, 构建纳米金颗粒Core-satellites结构并激发等离子体耦合增强效应,利用Hg2+可与DNA中胸腺嘧啶T形成T-Hg2+-T特异性结构,研制了用于检测水中Hg2+的局域等离子体共振(LSPR)光纤传感器.待测溶液中的Hg2+能够引起富含T的DNA单链折叠,抑制DNA杂交反应,降低等离子体耦合强度,改变LSPR谐振波长.通过检测谐振波长红移变化,实现对Hg2+浓度的定量检测.本方法检测Hg2+的线性范围为5~150 nmol/L, 检出限为3.4 nmol/L (3σ). Zn2+、Mg2+、Pb2+等重金属离子对Hg2+检测无明显干扰作用.实际水样中Hg2+加样回收率为94.2%~105.4%,相对标准偏差<4.8%.     

石墨相氮化碳的模板法制备、表征及光催化性能测试综合化学实验

采用简单原料（单氰胺、硅溶胶）利用模板法制备石墨相氮化碳,并对所得产物进行结构表征与形貌分析。采用光催化降解亚甲基蓝实验评价石墨相氮化碳的可见光催化性能,得到降解反应动力学方程与降解速率常数。通过实验,可使学生熟悉纳米材料可控制备中常用的模板法,对产物的测试与表征有利于加深学生对光催化材料结构与性能的了解。实验涉及多个学科领域,有利于拓宽学生知识面,培养学生科研创新能力。     

微乳法制备纳米Ru/NaY催化剂及其催化对苯二酚加氢

采用曲拉通X-100(Triton X-100)/正己醇/正庚烷/RuCl_3·3H_2O水溶液构成微乳液,以水合肼为还原剂,制备了纳米Ru颗粒,再破乳将其负载于NaY分子筛得到M-Ru/NaY催化剂.通过XRD、BET、XPS、SEM、TEM及DSC分析方法对催化剂进行了表征.表征结果表明,M-Ru/NaY催化剂具有金属钌平均粒径小,分布均匀,高度分散等优点.以对苯二酚加氢制1,4-环己二醇为探针反应,对微乳法和传统浸渍法制备的催化剂活性和选择性进行了比较,深入研究了催化剂用量,反应温度,氢气压力对对苯二酚加氢活性的影响及最佳反应时间的确定.实验结果表明,M-Ru/NaY催化剂在反应温度150℃,氢气压力4.0 MPa,m(M-Ru/NaY)∶m(对苯二酚)=0.2∶1,溶剂为异丙醇,此条件下反应30 min,对苯二酚转化率为100%,1,4-环己二醇的选择性高达92.6%.还考察了M-Ru/NaY催化剂的稳定性.最后,探讨了对苯二酚加氢反应路径.     

LIQUID CHLOROPRENE-HYDROXYETHYL METHACRYLATE COPOLYMER MODIFIED EPOXY RESIN Ⅱ. N, N-DIMETHYL BENZYL AMINE CURING SYSTEM

A series of liquid chloroprene-hydroxyethyl methacrylate copolymer (CP-HEMA) modifiedepoxy resin were prepared. The effects of CP-HEMA content, curing conditions on physical pro-perties of the modified system were examined. With IR and Viscoelastocuremeter, the curing reactionrate was determined and the mechanism of the curing reaction was discussed. The effects of CP-HEMA content and curing conditions on morphology were mainly observed by scanning electronmicroscopy.