Radiation induced inter-device leakage degradation

The evolution of inter-device leakage current with total ionizing dose in transistors in 180 nm generation technologies is studied with an N-type poly-gate field device (PFD) that uses the shallow trench isolation as an effective gate oxide. The overall radiation response of these structures is determined by the trapped charge in the oxide. The impacts of different bias conditions during irradiation on the inter-device leakage current are studied for the first time in this work, which demonstrates that the worst condition is the same as traditional NMOS transistors. Moreover, the two-dimensional technology computer-aided design simulation is used to understand the bias dependence.     

Nanodisc体系在膜蛋白结构与功能研究中的应用

膜蛋白是生物膜功能的主要执行者,在生物体内参与许多重要的生理过程. 但是,由于很难获得稳定均匀并且维持膜蛋白正确构象的膜模拟环境, 膜蛋白研究远远滞后于水溶型蛋白. 磷脂纳米盘（Nanodisc）是由高密度脂蛋白发展而来的用于膜蛋白研究的新型类膜结构. VDAC-1, GPCRs和细胞色素P450s等膜蛋白已成功的与Nanodisc组装起来,并且被人们利用液体核磁共振(NMR)和表面等离子体共振(SPR)等方法对其进行了相关的结构和生化研究. 随着高密度脂蛋白自身的设计修饰和Nanodisc相关技术的发展,Nanodisc将为膜蛋白的研究提供更多重要的信息.     

窄缝中气泡在磁性液体中的上升与变形

对窄缝中气泡在磁性液体中的上升与变形进行了可视化研究。定性分析了纳米磁性颗粒引发的黏度效应及表面活性剂分子依附作用对气泡上升速度与形状的影响。试验工质为体积浓度6.33%的水基Fe_3O_4磁性液体,同时对比了质量浓度25%的四甲基氢氧化铵水溶液、质量分数30%和50%的蔗糖溶液以及水中气泡的上升运动。窄缝间隙分别为1 mm和2 mm,气泡由底部不同直径的圆孔产生。试验结果表明:由于活性剂分子的存在,磁性液体气泡上升过程中由扁椭圆形渐转变为上圆下平的冠状,而其略大于水的黏度使气泡在1 mm窄缝中保持直线上升运动,但窄缝间隙增大到2 mm后,磁性液体中气泡的运动轨迹仍会发生振荡。     

四金属簇钨砷夹心型化合物[M4(H2O)2·(AsW9O34)2]10-(M=CuⅡ, CoⅡ, MnⅡ, NiⅡ, ZnⅡ)的合成、结构和磁特性研究

取代型杂多化合物可改变多酸化合物的酸碱性、氧化还原性和热稳定性,因而受到关注[1]. 夹心型化合物是一类新型化合物,具有大的摩尔质量,高的负电荷,且含有多个磁性中心,近年来已引起国内外的兴趣[2].     

非自共轭和不定椭圆问题的有限体积元方法的一致收敛性

In this paper, we prove the existence, uniqueness and uniform convergence of the solution of finite volume element method based on the P1 conforming element for non-selfadjoint and indefinite elliptic problems under minimal elliptic regularity assumption.     

液晶空间光调制器在阿达玛变换光谱仪中的应用研究——快速精确的解码方法

研究了液晶空间光调制器(LC-SLM)作为固定不动的编码模板应用于阿达玛变换光谱仪(HTS),提出了快速精确的解码方法,给出了由液晶空间光调制器编码模板所带来的均方根信噪比的改善.     

SJTU-1型医用超声诊断设备声输出测量系统的研制

本系统地研究了医用超声诊断设各声输出公布要求的国家标准GB16846—1997(idt.IEC61157—1992)中规定的主要指标的定义和测量方法，给出了相关的计算公式。介绍了为实施国标而研制的专用测量设备SJTU-1型医用超声设备声输出测量系统的工作原理、系统构成和技术性能。     

Synthesis and surface properties of PDMS–acrylate emulsion with gemini surfactant as co-emulsifier

Composite latex particles of acrylate and polydimethylsiloxane (PDMS) with high PDMS content was prepared by emulsion copolymerization and characterized by particle size analyzer, X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared (FTIR). With gemini surfactant as the co-emulsifier in the system, the PDMS content in the system reached 50%, which was far higher than the other reported values. Through the characterization of the particle size analyzer, the particle size augmented with the increase of the amount of PDMS, which could be said that the polysiloxane had participated into the reaction and had been introduced into the colloid particle. The results of FTIR indicated that almost all the monomer had been exhausted in the reaction because there was no C=C and D₄ characteristic peaks in the spectrum. Besides the surface properties also were measured by surface tension analysis, water absorption, and the static contact angle, it could be found that with the increase of polysiloxane content, the excellent properties acquired by PDMS were clearly revealed by the findings, such as the decrease of surface tension and water absorption, and the increase of static contact angle. All the measurements were consistent with the conclusion that the composite latex particles of polysiloxane and acrylate with high siloxane content had been prepared successfully.