双维位置灵敏CsI(Tl)探测器

描述了一种双维位置灵敏CsI(Tl)探测器.用3组分α源测量该探测器得到的位置分辨为0.81mm(FWHM),对于69MeV/u ³⁶Ar能量分辨为0.9％(FWHM).在RIBLL的ΔE-E粒子鉴别望远镜中常常作为E探测器.由于CsI(Tl)晶体对不同的粒子的能损-光输出的非线性,需要针对不同离子对CsI探测器作能量-光输出校正曲线.     

虚拟仪器在射频超导量子干涉仪控制电路中的应用

本文简要介绍LabVIEW开发的射频超导量子干涉器（rf SQUID）自动控制系统的虚拟仪器，系统可对超导量子干涉器的工作点进行调整和显示，实现了LabVIEW软件系统与第三方硬件的结合．本文将对系统工作原理、硬件电路组成和软件的设计做简要介绍．     

紫外-可见吸收光谱法现场监测聚苯胺的电化学降解

采用紫外-可见吸收光谱法现场监测了苯胺电化学聚合时的动力学降解过程,简单、直观地显示了阳极电位、酸度和苯胺浓度对降解过程的影响,结果表明,阳极电位越正、酸度越强、苯胺浓度越大,聚苯胺的降解速度越快。该方法得到的结果与聚苯胺膜在空白溶液中采用循环伏安法研究其降解动力学时得到的结果类似。     

像增强器信噪比测试方法的分析与研究

通过对像增强器信噪比常用测试方法的研究与分析,提出了一种对CCD摄像机采集的图像进行处理的新的信噪比测试方法,解决了在常用信噪比测试方法中待测参数多、采用测试仪器多的问题。利用新的测试方法和搭建的实验系统不仅实现了数据的统一处理,而且还可以分析照度与信噪比的关系。     

光纤复合环形腔单模激光器的研究

单模光纤激光器在光通讯和光传感中具有广阔的应用前景。分析了复合腔光纤激光器的构成及单模的实现特点,提出了一种新颖的光纤复合环形腔激光器结构,并对其进行了实验研究。该激光器使用了波长为980nm的半导体激光器作为泵浦源。三个腔长均为2m,彼此之间的腔长差为1～2mm的光纤环形滤波器与主谐振腔构成复合腔。此激光器在波长为1562nm处得到了线宽小于0.1nm的单模激光输出,输出的光功率可达到1mW。该激光器的阈值为5mW,斜率效率为4%。     

New Exact Solutions for a Class of Nonlinear Coupled Differential Equations

More new exact solutions for a class of nonlinear coupled differential equations are obtained by using a direct and efficient hyperbola function transform method based on the idea of the extended homogeneous balance method.     

Numerical Simulations of Calcium Ions Spiral Wave in Single Cardiac Myocyte

The calcium ions （Ca^2＋） spark is an elementary Ca^2＋ release event in cardiac myocytes. It is believed to buildup cell-wide Ca^2＋ signals, such as Ca^2＋ transient and Ca^2＋ wave, through a Ca^2＋-induced Ca^2＋ release （CICR） mechanism. Here the excitability of the Ca^2＋ wave in a single cardiac myoeyte is simulated by employing the fire-diffuse-fire model. By modulating the dynamic parameters of Ca^2＋ release and re-uptake channels, we find three Ca^2＋ signaling states in a single cardiac myoeyte： no wave, plane wave, and spiral wave. The period of a spiral wave is variable in the different regimes. This study indicates that the spiral wave or the excitability of the system can be controlled through micro-modulation in a living excitable medium.     

Permanent Magnetic Properties of Melt-Spun YCo5Cx Ribbons

Ribbons of nominal compositions YCo5 Cx （x = 0, 0.2, 0.4, 0.6） are prepared by melt spinning at surface velocities v = 5, 10, 15, 20, 25, 30 and 35 m/s. YCo5 ribbon is crystallized in a single YCo5 phase of hexagonal CaCu5 structure. A small quantity of YCoC2 phase appears in the ribbons with C addition besides the YCo5 phase. With the increase of x the lattice constant c increases and a along with the unit cell volume decreases. The largest values of iHc = 888 kA/m and （BH）max = 58.4 k Jim3 at present for the YCo5 ribbon system were obtained with x = 0.4 and v = 20 m/s. The improvement of the permanent magnetic properties is rooted in the refinement of the microstructure and the appearance of the YCoC2 phase which can act as domain wall pinning centers.     

Determination of the ~(12)C(p, γ)~(13)N reaction rates fromthe ~(12)C(~7Li,~6He)~(13)N reaction

The angular distribution of the 12C(7Li,6He)13N reaction at E(7Li) = 44.0 MeV was measured at the HI-13 tandem accelerator of Beijing, China. The asymptotic normalization coefficient (ANC) of 13N → 12C + p was derived to be (1.64 ± 0.11) fm-1/2 through the distorted wave Born approximation (DWBA) analysis. The ANC was then used to deduce the astrophysical S (E) factors and reaction rates for the 12C(p,γ)13N direct capture reaction at energies of astrophysical relevance.     

照度对测量三代微光像增强器MTF的影响分析

通过探讨像增强器MTF测试仪用光源的出射光照度对测量结果的影响,对透过测量狭缝的光强分布进行了分析.调节狭缝面的入射光照度,对不同照度作用下的调制传递函数进行了对比测量,经与微光像增强器的饱和输出亮度比较,得出:三代微光像增强器的MTF测试值随入射光照度分布呈抛物线分布,其最大值与微光像增强器的自动亮度控制特性有关.适当选择入射光照度,可确保被测像增强器既有足够的输出信噪比,而不进入饱和区域.