盐湖卤水中微量钒的浓度测定

为了测定盐湖卤水中微量钒的浓度,开发了一个钒的分离纯化流程来降低大量的共存离子的基质效应。该分离纯化流程包括萃取和反萃两个步骤。详细地研究了影响钒纯化效率的各种因素,得到钒的最佳分离纯化条件为:以正己烷为稀释剂,有机相中D2EHPA和TBP的体积百分比分别为30%及20%,在pH为3.0时萃取30 min;然后用3 mol/L H₂SO₄反萃 10 min。基于此分离纯化流程,将两个实际盐湖卤水样品中的微量钒纯化后,再用电感耦合等离子体质谱仪(ICP-MS)测定其浓度,该ICP-MS对51V 的检测灵敏度和检测限别为53 171 cps/(μg/L) 和1.88 ng/L。所得实际盐湖卤水钒测定结果的加标回收率接近100%而相对标准偏差低于0.6%,表明该方法可用于实际复杂体系中微量钒的浓度测定,例如海水和盐湖卤水。     

NaF薄膜的脉冲激光沉积法制备与结构研究

 采用脉冲激光沉积(PLD)方法在Si(100)衬底上制备了NaF薄膜。在激光重复频率2 Hz,能量密度3 J/cm²,本底真空度5×10^-5 Pa的条件下,研究衬底温度对薄膜沉积速率及结构的影响。台阶仪分析表明：薄膜的沉积速率随衬底温度增加呈指数函数增加,算出NaF薄膜的反应激活能为48.67 kJ/mol。原子力显微镜分析表明：薄膜致密而光滑,均方根粗糙度为0.553 nm。扫描电镜截面微观形貌分析表明：薄膜呈现柱状结构。X射线衍射分析表明：NaF薄膜为面心立方晶体结构,并具有显著的择优取向;当衬底温度约为400 ℃时,平均晶粒尺寸最大(129.6 nm),晶格微应变最小(0.225%)。     

弱激波冲击无膜重气柱和气帘界面的实验研究

研制了一个改进的激波管设备,对马赫数为1.2的弱激波冲击作用下空气中SF6气柱和气帘界面的演变过程进行了初步的实验研究。通过设计激波管实验段、烟雾发生器、气体箱、进气吸气系统和激波管尾段,控制混合气体中SF6的峰值浓度和初始气流速度,建立了稳定、可重复的无膜气柱和气帘初始界面形成技术。利用高速摄影技术,在水平面内观测了气柱和气帘的初始界面图像,沿垂直方向观测了界面RM(Richtmyer-Meshkov)不稳定性的演变过程。气柱演变图像显示了典型的对涡结构,气帘演变图像显示了早期的多蘑菇形结构和后期的相邻波长干扰效应。图像后处理表明,气柱的高度和宽度、气帘的宽度均随时间单调增加,且宽度比高度增加快得多。从二维涡量动力学方程出发,对图像中涡的演变过程进行了初步解释。     

Neutron Spectroscopic Factors of ^7Li and Astrophysical ^6Li（n,γ）^7Li Reaction Rates

Angular distributions of the ^7Li（^6Li, ^6Li）^7Li elastic scattering and the ^7Li（^6Li, ^7Lig.s.）^6Li, ^7Li（^6Li, ^7Li0.48）^6Li transfer reactions at Ec.m. = 23.7 MeV are measured with the Q3D magnetic spectrograph. The optical potential of ^6Li ＋ ^7Li is obtained by fitting the elastic scattering differential cross sections. Based on the distorted wave Born approximation （DWBA） analysis, spectroscopic factors of ^7Li =^6Li n are determined to be 0.73 ± 0.05 and 0.90 ± 0.09 for the ground and first exited states in ^7Li, respectively. Using the spectroscopic factors, the cross sections of the ^6 Li（n, γ0,1）^7 Li direct neutron capture reactions and the astrophysical ^6Li（n, γ）^7 Li reaction rates are derived.     

微型高温超导磁通泵的研制

本文给出了一种用高温超导体制作的微型磁通泵,对其工作原理进行了仔细分析研究.依照设计研制了磁通泵装置,并对其工作性能进行了初步测试.结果表明,该微型高温超导磁通泵有希望为电阻在1μΩ以内的高温超导闭合环路进行供电.切实克服高温超导接头性能不佳、n指数低等缺陷,有助于Bi系等高温超导带材在超导磁体闭环系统的应用.     

Permanent Magnetic Properties of Melt-Spun YCo5Cx Ribbons

Ribbons of nominal compositions YCo5 Cx （x = 0, 0.2, 0.4, 0.6） are prepared by melt spinning at surface velocities v = 5, 10, 15, 20, 25, 30 and 35 m/s. YCo5 ribbon is crystallized in a single YCo5 phase of hexagonal CaCu5 structure. A small quantity of YCoC2 phase appears in the ribbons with C addition besides the YCo5 phase. With the increase of x the lattice constant c increases and a along with the unit cell volume decreases. The largest values of iHc = 888 kA/m and （BH）max = 58.4 k Jim3 at present for the YCo5 ribbon system were obtained with x = 0.4 and v = 20 m/s. The improvement of the permanent magnetic properties is rooted in the refinement of the microstructure and the appearance of the YCoC2 phase which can act as domain wall pinning centers.     

Glassy metallic plastics

This paper reports a class of bulk metallic glass including Ce-, LaCe-, CaLi-, Yb-, and Sr-based metallic glasses, which are regarded as glassy metallic plastics because they combine some unique properties of both plastics and metallic alloys. These glassy metallic plastics have very low glass transition temperature (Tg~25oC to 150oC) and low Young’s modulus (~20 GPa to 35 GPa). Similar to glassy plastics, these metallic plastics show excellent plastic-like deformability on macro-, micro- and even nano-scale in their supercooled liquid range and can be processed, such as elongated, compressed, bent, and imprinted at low temperatures, in hot water for instance. Under ambient conditions, they display such metallic properties as high thermal and electric conductivities and excellent mechanical properties and other unique properties. The metallic plastics have potential applications and are also a model system for studying issues in glass physics.     

照度对测量三代微光像增强器MTF的影响分析

通过探讨像增强器MTF测试仪用光源的出射光照度对测量结果的影响,对透过测量狭缝的光强分布进行了分析.调节狭缝面的入射光照度,对不同照度作用下的调制传递函数进行了对比测量,经与微光像增强器的饱和输出亮度比较,得出:三代微光像增强器的MTF测试值随入射光照度分布呈抛物线分布,其最大值与微光像增强器的自动亮度控制特性有关.适当选择入射光照度,可确保被测像增强器既有足够的输出信噪比,而不进入饱和区域.     

宽谱段光学系统消二级光谱的设计

利用修正的部分色散(P)和阿贝数(V)公式,计算一些典型的普通光学玻璃在450nm～950nm波段的色散特性,应用二级光谱理论,采用普通光学材料,设计了一个复消色差系统,分析近红外波段光学系统的二级光谱特性及校正方法,给出设计实例。设计结果表明:在可见光近红外波段,采用重冕玻璃ZK4、ZK8和特种火石玻璃TF3组合实现了二级光谱色差的校正,即从理论的0.18mm减少到0.084mm,证明该系统有较好的消色差能力,并且具有较长的后截距,为安装像移补偿反射镜提供了方便。     

Dressed Four-Wave Mixing Spectroscopy Modified by Polarization Interference and Atom-Wall Collision in Micrometric Thin Cells

Dressed four-wave mixing （DFWM） spectroscopy is investigated theoretically in some micrometric thin cells. It is found that DFWM spectra can be modified by polarization interference of atoms and transient effects induced by atom-wall collision. This modification can lead to width-narrowing of DFWM lines and facilitates to implement experiment of high resolution DFWM spectroscopy in a confined atomic system.