A high-current electron beam ion trap as an on-line charge breeder for the high precision mass measurement TITAN experiment

The precision of atomic mass measurements in a Penning trap is directly proportional to the charge state q of the ion and, hence, can be increased by using highly charged ions (HCI). For this reason, charge breeding with an electron beam ion trap (EBIT) is employed at TRIUMF’s Ion Trap for Atomic and Nuclear science (TITAN) on-line facility in Vancouver, Canada. By bombarding the injected and trapped singly charged ions with an intense beam of electrons, the charge state of the ions is rapidly increased inside the EBIT. To be compatible with the on-line requirements of short-lived isotopes, very high electron beam current densities are needed. The TITAN EBIT includes a 6 Tesla superconducting magnet and is designed to have electron beam currents and energies of up to 5 A and 60 keV, respectively. Once operational at full capacity, most species can be bred into a He-like configuration within tens of ms. Subsequently, the HCI are extracted, pass a Wien filter to reduce isobaric contamination, are cooled, and injected into a precision Penning trap for mass measurement. We will present the first results and current status of the TITAN EBIT, which has recently been moved to TRIUMF after assembly and commissioning at the Max-Planck-Institute (MPI) for Nuclear Physics in Heidelberg, Germany.     

On the correspondence between rotational bands in the mass regionsA ≃ 100 andA ≃ 150

A refined technique is presented to project rotational bands observed in the well studiedZ≧60 rare-earth region into the region of stable ground-state deformation atA ～-100 with corresponding neutron numbers ofN ≧60. With this procedure, estimates of properties of so far unknown nuclei in the A～-100 region can be obtained. As an illustration, isotopes aroundN=64 are discussed within this projection method and within the frame-work of the recent quartet model.     

Hetergeneous-nucleation synthesis of monodisperse ε-cobalt nanoparticles using palladium seeds

Monodisperse bimetallic Pd–Co nanoparticles were prepared via a thermal decomposition of cobalt carbonyl using palladium seeds at the Pd/Co molar ratios 0.5%, 1%, and 5%. The heterogeneously nucleated nanoparticles without any size-selective precipitation are sufficiently uniform to self-assemble into ordered arrays. The as-synthesized nanoparticles are each a single crystal with a complex cubic structure called ε-Co. The presence of Pd seeds seems to improve the stability of Co nanoparticles against oxidation based on the results from time-dependent magnetization measurement.     

The magnetic properties of Be-codoped GaMnN grown via molecular beam epitaxy

GaMnN and Be-codoped GaMnN were grown via molecular beam epitaxy using a single GaN precursor and their structural and magnetic properties were examined. X-ray diffraction and superconducting quantum interference device (SQUID) measurements revealed that the grown layers are homogeneous without precipitates. The saturation magnetization of GaMnN has increased from ∼4 to ∼16 emu/cm³ via codoping of Be. The d–d exchange interaction between Mn atoms was discussed for the ferromagnetism of GaMnN.     

Hadron production near threshold

Final state interaction effects inpp→ pΛK ⁺ andpd →³Heη reactions are explored near threshold to study the sensitivity of the cross-sections to thepΛ potential and theηN scattering matrix. The final state scattering wave functions between Λ andp andη and³He are described rigorously. The Λ production is described by the exchange of one pion and aK-meson between two protons in the incident channel. Theη production is described by a two-step model, where in the first step a pion is produced. This pion then produces anη by interacting with another nucleon     

Low-frequency noise and inelastic tunneling spectroscopy in Fe(1 1 0)/MgO(1 1 1)/Fe(1 1 0) epitaxial magnetic tunnel junctions

We report on tunnelling magnetoresistance (TMR), current–voltage (IV) characteristics and low-frequency noise in epitaxially grown Fe(1 1 0)/MgO(1 1 1)/Fe(1 1 0) magnetic tunnel junctions (MTJs) with dimensions from 2×2 to 20×20 μm². The evaluated MgO energy barrier (0.50±0.08 eV), the barrier width (13.1±0.5 Å) as well as the resistance times area product (7±1 MΩ μm²) show relatively small variation, confirming a high quality epitaxy and uniformity of all MTJs studied. At low temperatures (T<10 K) inelastic electron tunneling spectroscopy (IETS) shows anomalies related to phonons (symmetric structures below 100 meV) and asymmetric features above 200 meV. We explain the asymmetric features in IETS as due to generation of electron standing waves in one of the Fe electrodes. The noise power, though exhibiting a large variation, was observed to be roughly anti-correlated with the TMR. Surprisingly, for the largest junctions we observed a strong enhancement of the normalized low-frequency noise in the antiparallel magnetic configuration. This behavior could be related to the influence of magnetostriction on the characteristics of the insulating barrier through changes in local barrier defects structure.     

Effects of ground-state correlations on 2νββ decay rates and limitations of the QRPA approach

Half-lives of the 2νββ decay are calculated in the proton-neutron QRPA for⁷⁶Ge,⁸²Se,¹⁰⁰Mo,^128,130Te,¹³⁶Xe and¹⁵⁰Nd. The strength of the particle-particle interaction, which plays a decisive role for a reliable evaluation of the half-lives, is determined from a QRPA calculation of singleβ ⁺ decays. The 2ν decay rates calculated with the interaction strength fitted in this way are strongly suppressed and found to be consistent with the existing experimental data. Effects of the ground-state correlations on the suppression are investigated. On the other hand, the present calculation indicates limitations of the QRPA approach.     

Discovery and frequency measurement of short-wavelength far-infrared laser emissions from optically pumped <Superscript>13</Superscript>CD<Subscript>3</Subscript>OH and CHD<Subscript>2</Subscript>OH

A three-laser heterodyne system was used to measure the frequencies of twelve previously observed far-infrared laser emissions from the partially deuterated methanol isotopologues ¹³CD₃OH and CHD₂OH. Two laser emissions, a 53.773 μm line from ¹³CD₃OH and a 74.939 μm line from CHD₂OH, have also been discovered and frequency measured. The CO₂ pump laser offset frequency was measured with respect to its center frequency for twenty-four FIR laser emissions from CH₃OH, ¹³CD₃OH and CHD₂OH. PACS 07.57.Hm; 42.55.Lt; 42.62.Eh     

Self-organized ZnAl2O4 nanostructures grown on -sapphire

Self-organized ZnAl₂O₄ nanostructures with the appearance (in SEM) of high aspect ratio horizontal nanowires are grown on uncatalysed c-sapphire by vapour phase transport. The nanostructures grow as three equivalent crystallographic variants on c-sapphire. Raman and cathodoluminescence spectroscopy confirm that the nanostructures are not ZnO and TEM shows that they are the cubic spinel, zinc aluminate, ZnAl₂O₄, formed by the reaction of Zn and O with the sapphire substrate.     

Oil Migration in Chocolate

Oil migration in filled chocolates limits shelf life due to texture changes and loss of visual appeal. Spatial and temporal oil concentration changes of a two-layer chocolate and peanut butter filling system, which models a filled chocolate, were monitored by magnetic resonance imaging. Formulations of chocolate varied with respect to particle size, milk fat content and emulsifier level. Sorption-time experimental data was used to establish the best fit diffusion coefficient for a Fickian diffusion model. On the basis of the comparison of spatial experimental data to the model, Fickian diffusion alone does not account for oil migration. Authors' address: Michael J. McCarthy, Department of Food Science and Technology, University of California, One Shields Avenue, Davis, CA 95616, USA