Principal components and spatial patterns of rain over Northern Italy, in relation to wind and geopotential fields

Summary A statistical study of precipitation over the Po Valley and the Alps during four winters, based on the application of a principal component (p.c.) method, exhibited a good correlation between the first three rotated eigenvectors of the cross-product matrix (between time series of data recorded at 70 stations) and three typical atmospheric circulation schemes over Northern Italy. The study is here continued, by relating these results to meteorological fields evaluated over a region wider than the area previously considered. Our attention mainly concentrated on the fields of time trend of geopotential height at 850 hPa over Europe, between latitude 34.5 and 51 degrees North and longitudes 0 and 21 degrees East. This was suggested by some peculiar relationships shown by the statistical distributions of geopotential height and wind direction and speed with respect to the first three p.c.’s. These relationships made us think of the possibility to use those trends as predictors of precipitation fields. Our analysis puts into evidence that three spatial patterns of geopotential, height time trend can be safely associated to the first three p.c.’s and, as a consequence, to the three precipitation modes corresponding to the spatial distributions of the eigenvectors, previously identified by us. They can therefore be considered meaningful precursors of precipitation field patterns over Northern Italy and Alpine regions.

---

Riassunto Uno studio statistico della precipitazione sulla pianura padana e sulle Alpi durante quattro inverni, basato sull’applicazione del metodo delle componenti principali (c.p.), ha mostrato una buona correlazione fra i primi tre autovettori rotati della matrice dei prodotti incrociati (fra le serie temporali dei dati registrati in 70 stazioni) e tre tipici schemi di circolazione atmosferica sull’Italia del Nord. Lo studio viene qui prosequito, mettendo in relazione tali risultati con campi meteorologici valutati su una zona piú ampia di quella precedentemente considerata. La nostra attenzione si è prevalentemente concentrata sui campi di tendenza temporale dell’altezza di geopotenziale a 850 hPa sull’Europa, a latitudini comprese tra 34.5 e 51 gradi Nord e longitudini fra 0 e 21 gradi Est. Ciò è stato suggerito da alcune relazioni peculiari mostrate dalle distribuzioni statistiche di altezza di geopotenziale e di direzione ed intensità del vento rispetto alle prime tre c.p., che ci hanno fatto pensare alla possibilità di usare tali tendenze come predittori del campo di precipitazione. La nostra analisi ha messo in evidenza il fatto che tre distribuzioni spaziali di tendenza temporale del campo di altezza di geopotenziale possono essere con sicurezza associate alle prime tre c.p. e., quindi, ai tre modi di precipitazione corrispondenti alle distribuzioni spaziali degli autovettori precedentemente da noi identificati. Essi possono pertanto essere considerati significativi precursori del campo di precipitazione sull’Italia del Nord e sulle regioni alpine.

---

Резюме Статистическое исследование выпадения осадков над долиной реки По и Альпами в течение четырех зим, основанное на применении метода главных компонент, обнаруживает хорошую корреляцию между первыми тремя вращающимися собственными векторами матрицы векторного произведения (между временными последовательностями данных, зарегистрированных на 70 станциях) и тремя схемами типичной атмосферной циркуляции над Северной Италией. В этой работе продолжены исследования. Полученные результаты связывайотся с метеорологическими полями, вычисленными над областью, которая шире ранее рассмотренной области. Главное внимание мы обращаем на поля временного хода для геопотенциальной высоты при 850гПа над Европой, между 34.5^щ и 51^щ северной широты и между 0^щ и 21^щ восточной долготы. Это следует из специальных соотношений, полученных с помощью статистических распределений геопотенциальной высоты и направления и скорости ветра относительно первых трех главных компонент. Эти соотношения позволяют нам использовать исследованные тенденции, как предсказатели полей вьшадения осадков. Нам анализ подтверждает, что три пространственным распределения временного хода для геопотенциальной высоты могут быть связаны с первыми тремя главными компонентами и, как следствие, с тремя моделями выцадения осадков, которые соответствуют пространственным распределениям собственных векторов, ранее идентифицированных в работе [Ш]. Следовательно, они могут рассматриватяся как предвестники для распределений полей осадков над Северной Италией и над Альпами.

     

Using dileptons to probe the color glass condensate

The rapidity and transverse momentum dependence of the nuclear modification ratio for dilepton production at RHIC and LHC is presented, calculated in the color glass condensate (CGC) framework. The transverse momentum ratio is compared for two distinct dilepton mass values and a suppression of the Cronin peak is verified even for large mass. The nuclear modification ratio suppression in the dilepton rapidity spectra, as obtained experimentally for hadrons at RHIC, is verified for LHC energies at large transverse momentum, although not present at RHIC energies. The ratio between LHC and RHIC nuclear modification ratios is evaluated in the CGC, showing the large saturation effects at LHC compared with the RHIC results. These results consolidate the dilepton as a most suitable observable to investigate the QCD high density approaches.     

Mössbauer study on LiFePO4 cathode material for lithium ion batteries

Crystalline LiFePO₄ has been synthesized using solid-state, spray pyrolysis, and wet chemical methods. The crystal parameters were obtained from Rietveld’s refinement methods of the X-ray diffraction patterns. A detailed investigation of the Fe valency carried out using Mössbauer spectroscopy at room temperature indicates that Fe is predominantly present in its bivalent state.     

Isospin symmetry violation, meson production and η-nucleus interaction studies

We have studied isospin symmetry violation in nuclear reactions by measuring simultaneously the cross-section of the following two reactionsp +d →³H π⁺ andp +d →³He π⁰. The experiment was perfomed at the cooler synchrotron accelerator COSY, Jülich at several beam energies close to the correspondingη production threshold. We also have ongoing programmes onη-nucleus final-state interaction studies viap+⁶ Li →⁷ Be +η reactions, high resolution search for dibaryonic resonances and lambda-proton final state interaction studies. The experimental details and results obtained so far are presented here     

Working group report: Flavor physics and model building

This is the report of flavor physics and model building working group at WHEPP-9. While activites in flavor physics have been mainly focused on B-physics, those in model building have been primarily devoted to neutrino physics. We present summary of working group discussions carried out during the workshop in the above fields, and also briefly review the progress made in some projects subsequently.     

1.2 Anorganische analyse

Ohne Zusammenfassung     

Fluctuation measurements in a supersonic boundary layer implying in-situ calibration of the hot-wire anemometer

A calibration technique for the constant-temperature hot-wire anemometer is presented, which is based on traversing the probe through the boundary layer of a flat plate while simultaneously performing fluctuation measurements. The free stream Mach number was M = 2.54, and the Reynolds number Re_d, based on wire diameter, ranged from 9 to 23. A comparison of the sensitivity values obtained with the aid of such a calibration procedure — under the condition of neglecting low temperature loadings (t<0.6) — agrees well with sensitivities determined with free-stream data-The use of a modified transfer function for correcting the power spectra of flow perturbations revealed a conformity of wide parts of the corrected spectra with the Kolmogorov decay. The fluctuation levels of total temperature and mass flux were computed for the boundary layer of a flat plate. This work was presented at the International Conference on the Methods of Aerophysical Research ICMAR 2007, which was held in Novosibirsk on 5–10 February 2007.     

Isobar separation at FRS-ESR – a development towards pure isomeric stored beams

One important goal of the ILIMA project at FAIR is the study of masses and decay properties of relativistic isomeric beams stored and cooled in the planned storage-ring complex. A new scheme is described, where a storage-cooler ring is used for high-resolution mass separation. Experimental results on the separation of the isobaric pair ¹⁴⁰Pr-¹⁴⁰Ce are presented. P. Beller, deceased.     

Improvement of least-squares finite difference method on simulating slider air bearings in head disk systems

Least-squares finite difference (LSFD) method, one of mesh-free methods, is used to solve slider air bearings problem through discritizing the generalized Reynolds equation into nonlinear systems of algebraic equations. Two approximation schemes for the linearization of these equations are presented and compared. And, some new techniques to search supporting points for the reference node in the mesh-free method were proposed and explored. Therefore, these improvements eliminate some potential limitation of the LSFD method previously published and further facilitate its employment in complex slider models. Advanced step slider as an example of negative pressure sliders is simulated and verified using the improved LSFD mesh-free method in head disk systems.