Evaluation of the Effect of Citronellol Group on Functionalized Mesogenic Materials by Capillary GC

In this paper, the effects of functionalization with terpenes on two new liquid-crystalline stationary phases for gas chromatography (GC) are described. Citronellol was used as the terminal group in the first material, and tetrahydrogeraniol was used with a second material. Inverse GC showed that the new materials have wide liquid-crystalline ranges (mesophases), 371–500 and 395–501 K, respectively. Moreover, they show good thermal stability up to 523 K and good potential as stationary phases for capillary GC. To clarify the effects of the liquid crystal structures and functional groups on retention and separation, the chromatographic behaviors of the two stationary phases were compared by eluting alkylbenzenes, polycyclic aromatic hydrocarbons, aromatic compounds, and terpenoids. The selectivities for a wide range of analytes achieved using the citronellol column were significantly better than those obtained using the tetrahydrogeraniol column. The columns showed different retention behaviors and fine resolutions for some of the main constituents of essential oils. Introduction of the double bond of citronellol greatly improved the polarization interactions involved in the shape recognition of the liquid-crystalline state for isomers. The new citronellol liquid-crystalline stationary phase, therefore, has a high affinity for natural compounds.

     

A Bistable Microelectromechanical System Actuated by Spin-Crossover Molecules

We report on a bistable MEMS device actuated by spin-crossover molecules. The device consists of a freestanding silicon microcantilever with an integrated piezoresistive detection system, which was coated with a 140 nm thick film of the [Fe(HB(tz)₃)₂] (tz=1,2,4-triazol-1-yl) molecular spin-crossover complex. Switching from the low-spin to the high-spin state of the ferrous ions at 338 K led to a reversible upward bending of the cantilever in agreement with the change in the lattice parameters of the complex. The strong mechanical coupling was also evidenced by the decrease of approximately 66 Hz in the resonance frequency in the high-spin state as well as by the drop in the quality factor around the spin transition.     

Preparation of new copolymer (polystyrene/TMSPM grafted on DDA-fractionated algerian montmorillonite) hybrid organoclay by radical copolymerization: structural study,thermal stability and hydrophobicity area

Journal of Thermal Analysis and Calorimetry - Polystyrene/organo-Algerian montmorillonite hybrid material was prepared by radical copolymerization of styrene monomer in the presence of the double...     

Electronic Structure Modulation in an Exceptionally Stable Non‐Heme Nitrosyl Iron(II) Spin‐Crossover Complex

The highly stable nitrosyl iron(II) mononuclear complex [Fe(bztpen)(NO)](PF₆)₂ (bztpen=N‐benzyl‐N,N′,N′‐tris(2‐pyridylmethyl)ethylenediamine) displays an S=1/2?S=3/2 spin crossover (SCO) behavior (T_1/2=370 K, ΔH=12.48 kJ mol^?1, ΔS=33 J K^?1 mol^?1) stemming from strong magnetic coupling between the NO radical (S=1/2) and thermally interconverted (S=0?S=2) ferrous spin states. The crystal structure of this robust complex has been investigated in the temperature range 120–420 K affording a detailed picture of how the electronic distribution of the t_2g–e_g orbitals modulates the structure of the {FeNO}⁷ bond, providing valuable magneto–structural and spectroscopic correlations and DFT analysis.     

Polypyrrole-palladium nanocomposite coating of micrometer-sized polymer particles toward a recyclable catalyst

A range of near-monodisperse, multimicrometer-sized polymer particles has been coated with ultrathin overlayers of polypyrrole-palladium (PPy-Pd) nanocomposite by chemical oxidative polymerization of pyrrole using PdCl(2) as an oxidant in aqueous media. Good control over the targeted PPy-Pd nanocomposite loading is achieved for 5.2 μm diameter polystyrene (PS) particles, and PS particles of up to 84 μm diameter can also be efficiently coated with the PPy-Pd nanocomposite. The seed polymer particles and resulting composite particles were extensively characterized with respect to particle size and size distribution, morphology, surface/bulk chemical compositions, and conductivity. Laser diffraction studies of dilute aqueous suspensions indicate that the polymer particles disperse stably before and after nanocoating with the PPy-Pd nanocomposite. The Fourier transform infrared (FT-IR) spectrum of the PS particles coated with the PPy-Pd nanocomposite overlayer is dominated by the underlying particle, since this is the major component (>96% by mass). Thermogravimetric and elemental analysis indicated that PPy-Pd nanocomposite loadings were below 6 wt %. The conductivity of pressed pellets prepared with the nanocomposite-coated particles increased with a decrease of particle diameter because of higher PPy-Pd nanocomposite loading. "Flattened ball" morphologies were observed by scanning/transmission electron microscopy after extraction of the PS component from the composite particles, which confirmed a PS core and a PPy-Pd nanocomposite shell morphology. X-ray diffraction confirmed the production of elemental Pd and X-ray photoelectron spectroscopy studies indicated the existence of elemental Pd on the surface of the composite particles. Transmission electron microscopy confirmed that nanometer-sized Pd particles were distributed in the shell. Near-monodisperse poly(methyl methacrylate) particles with diameters ranging between 10 and 19 μm have been also successfully coated with PPy-Pd nanocomposite, and stable aqueous dispersions were obtained. The nanocomposite particles functioned as an efficient catalyst for the aerobic oxidative homocoupling reaction of 4-carboxyphenylboronic acid in aqueous media for the formation of carbon-carbon bonds. The composite particles sediment in a short time (相似文献   

Synergetic effect of host-guest chemistry and spin crossover in 3D Hofmann-like metal-organic frameworks [Fe(bpac)M(CN)4] (M=Pt, Pd, Ni)

The synthesis and characterization of a series of three‐dimensional (3D) Hofmann‐like clathrate porous metal–organic framework (MOF) materials [Fe(bpac)M(CN)₄] (M=Pt, Pd, and Ni; bpac=bis(4‐pyridyl)acetylene) that exhibit spin‐crossover behavior is reported. The rigid bpac ligand is longer than the previously used azopyridine and pyrazine and has been selected with the aim to improve both the spin‐crossover properties and the porosity of the corresponding porous coordination polymers (PCPs). The 3D network is composed of successive {Fe[M(CN)₄]}_n planar layers bridged by the bis‐monodentate bpac ligand linked in the apical positions of the iron center. The large void between the layers, which represents 41.7 % of the unit cell, can accommodate solvent molecules or free bpac ligand. Different synthetic strategies were used to obtain a range of spin‐crossover behaviors with hysteresis loops around room temperature; the samples were characterized by magnetic susceptibility, calorimetric, Mössbauer, and Raman measurements. The complete physical study reveals a clear relationship between the quantity of included bpac molecules and the completeness of the spin transition, thereby underlining the key role of the π–π stacking interactions operating between the host and guest bpac molecules within the network. Although the inclusion of the bpac molecules tends to increase the amount of active iron centers, no variation of the transition temperature was measured. We have also investigated the ability of the network to accommodate the inclusion of molecules other than water and bpac and studied the synergy between the host–guest interaction and the spin‐crossover behavior. In fact, the clathration of various aromatic molecules revealed specific modifications of the transition temperature. Finally, the transition temperature and the completeness of the transition are related to the nature of the metal associated with the iron center (Ni, Pt, or Pd) and also to the nature and the amount of guest molecules in the lattice.     

Lasing of a Quantum-Cascade Laser with a Thin Upper Cladding

Optics and Spectroscopy - We present the results of experiments on the fabrication and study of the properties of quantum-cascade lasers of the spectral range of 7–8 μm in the geometry...     

The compton defect in ammonia as observed using 35 keV incident electrons

Using a 35 keV electron beam incident on NH₃, precision measurements of the energy loss position of the Compton peak have been performed. The observed Compton peak is found to be at larger energy losses than predicted for an electron scattered through the same angle from a stationary unbound electron. This defect has been studied for the momentum transfer range 0.5 au < K < 11 au, and is shown to be nonzero even at large K values. A sudden increase in the magnitude of the defect is observed when the inner electrons start contributing to the maximum of the Compton profile. This could suggest the possibility that the defect is related to the binding energies of the target electrons.