Medicinal flowers. VIII. Radical scavenging constituents from the flowers of Prunus mume: structure of prunose III

The methanolic extract and its fractions from the fresh flowers of Prunus mume SIEB. et ZUCC. were found to show scavenging effects on 1,1-diphenylpicryl-2-hydrazyl (DPPH) radical and superoxide. The fragrance constituents of P. mume were analyzed by GC-MS and a new polyacylated sucrose, prunose III, was isolated from the ethyl acetate-soluble fraction. The structure of prunose III was determined on the basis of chemical and physicochemical evidence as 4,3',4',6'-tetra-O-acetyl-6-O-p-coumaroylsucrose. In addition, the scavenging effects of the principal constituents on DPPH radical and superoxide were examined.     

Solvent-induced polymorphism of three-dimensional hydrogen-bonded networks of hexakis(4-carbamoylphenyl)benzene

The crystal structures for three types of three-dimensional (3-D) hydrogen-bonded networks of hexakis(4-carbamoylphenyl)benzene (1), the network morphologies of which depend greatly on crystallization conditions, have been determined. When this compound is crystallized from hot DMSO, the resulting crystals, 1.12DMSO (orthorhombic, Pca2(1)), showed a 3-D hydrogen-bonded porous network (type A) via 1-D catemer chains as a hydrogen-bonding motif of six primary amide groups. The type A network creates chambers surrounded by six molecules of 1 and channels along the c axis to give the highest porosity among the network polymorphs of 1 investigated here. Crystallization from a boiling mixture of n-PrOH and water gave 1.6n-PrOH (monoclinic, P2(1)/c), which exhibits another type of 3-D hydrogen-bonded porous network (type B) via cyclic dimers as another hydrogen-bonding motif of six primary amide groups. The type B network leads to triangle-like channels along the a axis having a cross section of ca. 9.2 x 9.7 x 9.7 A (including van der Waals radii). The crystal structure of 1.H(2)O (monoclinic, P2(1)/c), which was produced under hydrothermal conditions, showed a nonporous 3-D hydrogen-bonded network chain of amide groups (type C) composed of a mixed hydrogen bonding motif of helical catemer chains/cyclic dimer/catemer. Solvent-induced topological isomerism of these 3-D hydrogen-bonded networks of 1 arises from (i) the guest inclusion ability based on a radially functionalized hexagonal structure of 1, (ii) the correlation between the hydrogen bond donor ability of the syn and anti protons of the primary amide group in host 1 and the hydrogen bond acceptor ability of the oxygen atoms of 1 and guest solvents, and (iii) the polarity of the bulk crystallization solvents.     

The effect of folate-appended methyl-β-cyclodextrin increases on survival rates in a peritoneal dissemination mouse models of human ovarian cancer

Journal of Inclusion Phenomena and Macrocyclic Chemistry - Among gynaecological cancers, ovarian cancer is known to be highly sensitive to chemotherapy. However, it is often detected at an advanced...     

Synthesis of Controlled Block and Graft Copopolymers. II. Block and Graft Polymerization Initiated by Monohalo-Containing Polymer/Manganese Carbonyl Systems

Abstract

Block polymerization of methyl methacrylate initiated with monohalo-terminated polystyrene/manganese carbonyl systems were investigated. The rate of polymerization was lower than that of the trihalo-terminated polystyrenelmanganese carbonyl system. The molecular weight of the block copolymers obtained was independent of the conversion. To define the polymerization mechanism, 1-bromobutane was employed as a model compound for monohalo-terminated polystyrene. Polymerization kinetics followed a modified rate equation based on the Michaelis-Menten mechanism. The molecular weight of the block co-polymer could be regulated by varying the ratio of monohalo-terminated polymer to methyl methacrylate. Graft polymerization of methyl methacrylate initiated with chloromethylstyrene-styrene copolymer/ manganese carbonyl was also carried out. The polymerization behavior was strongly affected by the concentration of manganese carbonyl. Characterization of graft copolymers by GPC and halogen analysis showed that the number of grafting points per backbone polymer molecule increased when the concentration of manganese carbonyl was raised, but that the branches became shorter.     

Development and validation of stable‐isotope dilution liquid chromatography–tandem mass spectrometric method for determination of salivary progesterone

A method for the quantification of progesterone (PROG) in human saliva using liquid chromatography–electrospray ionization–tandem mass spectrometry (LC‐ESI‐MS/MS) has been developed and validated. The saliva was deproteinized with acetonitrile, purified using a Strata™‐X cartridge, and subjected to LC‐ESI‐MS/MS. Quantification was based on selected reaction monitoring, and deuterated PROG was used as the internal standard. This method allowed the reproducible (intra‐ and inter‐assay relative standard deviations, <2.2%) and accurate (analytical recovery, 96.6–99.7%) quantification of the salivary PROG using a 400 μL sample, and the limit of quantification was 12.5 pg/mL. The developed method enabled detection of the variation in the salivary PROG concentrations of healthy volunteers during the menstrual cycle and measurement of the salivary concentrations of pregnant women. The method is expected to be an alternative to the blood PROG monitoring in clinical examinations, because saliva collection is easy, non‐invasive and repeatable. Copyright © 2011 John Wiley & Sons, Ltd.     

Simultaneous analysis of haloperidol, its three metabolites and two other butyrophenone-type neuroleptics by high performance liquid chromatography with dual ultraviolet detection

We investigated simultaneous determination of haloperidol (HAL), its three metabolites [reduced HAL (R-HAL), 3-(4-fluorobenzoyl)propionic acid (FBPA) and 4-(4-chlorophenyl)-4-hydroxypiperidine (CPHP)] and two related compounds [spiperone (SPI) and droperidol (DRO)] in phosphate-buffered saline using high-performance liquid chromatography (HPLC) coupled with dual ultraviolet detection (220 and 250 nm). Retention times of HAL, R-HAL, FBPA, CPHP, SPI and DRO were 16.8, 11.8, 10.2, 4.1, 12.6 and 8.3 min, respectively. Their lower limits of detection were 7.5, 14, 4.5, 12, 10 and 20 ng/mL in the same order. The coefficients of variation for their intra- and inter-day assays were less than 7.8 and 9.4%, respectively. Of the other centrally acting drugs, only amoxapine interfered with the peak of DRO. Using our procedure, the binding study of tested compounds to synthetic melanin, human serum albumin and alpha1-acid glycoprotein was performed by determining the unbound concentration to total concentration ratio. These results indicated that simultaneous assay of HAL, R-HAL, FBPA, CPHP, SPI and DRO in phosphate-buffered saline by HPLC equipped with dual ultraviolet detection is simple, sensitive and reproducible. Also, our assay system can be applied to the binding study of these compounds to synthetic melanin, human serum albumin and alpha1-acid glycoprotein.     

Development of an analytical method using microchip capillary electrophoresis for the measurement of fluorescein-labeled salivary components in response to exercise stress

We have developed an analytical method using microchip capillary electrophoresis (microchip CE) for the high-speed separation of fluorescein-labeled salivary components in response to exercise stress. Optimal separation was obtained using a borate buffer at pH 9.5 containing 10 mM beta-cyclodextrin and 1.0% (w/v) methylcellulose. To minimize individual differences in human saliva, such as viscosity, conductivity, and contaminants, the concentration of methylcellulose in the analytical conditions played a key factor. The optimized separation conditions produced identical electropherograms successfully despite of the use of different microchips made from quartz glass or poly-methylmethacrylate (PMMA). In addition, a practical application of bicycle ergometer stress was performed. Some components in human saliva showed a marked decrease after exercise stress.     

Kinetic substituent and solvent effects in 1,3-dipolar cycloaddition of diphenyldiazomethanes with fullerenes C60 and C70: a comparison with the addition to TCNE, DDQ, and chloranil

Kinetics of 1,3-dipolar cycloaddition of a series of meta- and para-substituted diphenyldiazomethanes (DDMs) with fullerenes C60 and C70 as dipolarophiles have been investigated in toluene at 30 degrees C. Fullerene C60 was ca. 1.5 times more reactive than C70. The rate constants (k) for the primary [3 + 2] additions increased with the increase of the electron-releasing ability of the meta and para substituent. The log k/k0 values were well correlated by the Yukawa-Tsuno (Y-T) equations with the smaller negative rho values (-1.6 and -1.7 for C60 and C70) and the reduced resonance reaction constants r (0.22 and 0.17) compared to similar reactions of common acceptors, TCNE, DDQ, and chloranil (CA). The plots of log k (acceptor) versus log k (C60) as reference gave good regression equations and the slopes became larger in the order of TCNE > DDQ > CA > C70 > or = C60. The rates were also found to decrease with the increase of solvent polarity due to the ground-state solvation of fullerenes. However, the relative reactivity of these acceptors toward the unsubstituted DDM increased in the order of DDQ > C60 > or = C70 > TCNE > CA. The unexpected higher reactivity of fullerenes was interpreted in terms of the inherent steric strain by the pyramidalization of the sp2 C-atoms as well as the shorter [6,6] bonds with larger pi-electron densities.     

Enzymatically triggered self-assembly of poly(ethylene glycol)-attached oligopeptides into well-organized nanofibers

A unique and programmable peptide self-assembling system has been fabricated by using poly(ethylene glycol)-attached amphiphilic oligopeptide, which shows rapid self-assembly into well-organized beta-sheet nanofibers in response to an enzymatic reaction.