Synthesis and characterization of a Ni nanoparticle stabilized on Ionic liquid‐functionalized magnetic Silica nanoparticles for tandem oxidative reaction of primary alcohols

In this research, preparation of the magnetic nanoparticle, coating by a silica shell using (3‐aminopropyl) triethoxysilane and synthesis of a novel sulfonic acid‐substituted imidazolium‐based ionic liquid onto the surface of these particles via a multi‐component reaction, is described. The functionalized nanoparticles was loaded by Ni nanoparticles and characterized by means of techniques such as XRD, FTIR, SEM, EDX, TEM, TGA and ICP‐OES. The nanostructures have spherical shapes that ranged in size from 80 to 100 nm. The catalytic activity of these nanoparticles was tested in aerobic oxidation of primary alcohols that showed good performance in the wide range of primary alcohols in water at mild reaction conditions. As a second step of this work, the tandem oxidative synthesis of alkylacrylonitriles and bisindolylmethanes were investigated using primary alcohols under oxidation conditions. This catalyst system can be recovered using external magnet and reused for five consecutive cycles without significantly less of its activity.     

Synthesis and Characterization of Chromium-Based Catalysts for Ethylene-1-hexene Copolymers Preparation via In-Situ Polymerization of Ethylene

The tandem catalysis system including the trimerization catalyst of CrCl₃/SNS (SNS = bis-(2-pentylsulfanyl-ethyl)-amine) (Cat 1) and the copolymerization catalyst Cat 2 of Cr/SiO₂ (Grace 643) has been prepared and used to the synthesis of branched polyethylene. The optimum polymerization conditions were found to be as follows: chromium concentration 0.2 wt %, ethylene pressure 23 bar, solvent hexane, polymerization temperature 90°C, co-catalyst triethylaluminum. The optimally prepared polyethylene was characterized thermally and morphologically. Appearance of α and γ hydrogens in ethylene-1-hexene copolymer confirms the presence of branches in polyethylene backbone.     

Application of ion-imprinted polymer synthesized by precipitation polymerization as an efficient and selective sorbent for separation and pre-concentration of chromium ions from some real samples

In this study, a new Cr(III)-imprinted polymer (Cr(III)-IIP) is prepared from CrCl₃·6H₂O, methacrylic acid functional monomer, ethyleneglycoldimethacrylate cross-linking agent, 2,2?-azobisisobutyronitrile radical initiator and 2,2-(azanediylbis (ethane-2,1-diyl))bis(isoindoline-1,3-dione) ligand. To obtain the maximum adsorption capacity, the optimum condition was studied through pH, type and concentration of eluent, IIP weight, sample volume as well as the adsorption and desorption times. The Cr(III) ion content was determined via flame atomic absorption spectrometer. In optimum conditions, the adsorption capacity of the IIP for Cr(III) was obtained to be 74.65 mg g^?1, using 50 mg of IIP and the initial pH solution of 3.0. Both the adsorption and desorption times for quantitative analyses of Cr(III) ions were 15 and 5 min; respectively. After elution of the adsorbed ions by 3 mL of 4 mol L^?1 HNO₃ aqueous solution, the established IIP-based SPE procedure provides a reasonable pre-concentration factor of 100. The IIP-based pre-concentration method provides a low detection limit of 1.7 µg L^?1 with good repeatability (RSD?=?3.22%). Reusability studies confirmed that synthesis IIP is reusable and recoverable up to six cycles. According to the selectivity experiments, it was concluded that the prepared sorbent possesses more affinity toward Cr(III) ions than other ions such as Al³⁺, Pb²⁺, Cu²⁺, Mn²⁺, Fe²⁺, Zn²⁺, and Ni²⁺ ions. To evaluate the potential applicability of the proposed separation method, the pre-concentration and determination of trace amounts of Cr(III) were performed successfully in food samples with complex matrices, a bestial sample (i.e. cow liver) and an herbal product (i.e., broccoli) as real samples.     

Efficient synthesis of 3,4-dihydropyrano[3,2-c]chromenes catalyzed by Ni(II)-functionalized Li<Superscript>+</Superscript>-Montmorillonite in a one-pot fashion under solvent-free conditions

A family of 3,4-dihydropyrano[3,2-c]chromenes were synthesized from 4-hydroxycoumarin and malononitrile via a one-pot reaction under solvent-free conditions at 100 °C catalyzed by Ni@Imine-Li⁺-MMT. This methodology tolerates most of the substrates and has the merits of lower loading of the catalyst, absence of solvents, excellent yields and reusability of the catalyst. A reasonable mechanism is also proposed. This catalytic system can be reused for at least five times with a negligible loss of activity. The prepared catalyst was characterized by using FTIR, TGA, SEM, TEM, uv-DRS, EDX and XRD.     

A catalyst-free and green method for synthesis of 9-substituted-9H-diuracilopyrans in magnetized water: experimental aspects and molecular dynamics simulation

Research on Chemical Intermediates - The reactions of aldehydes and barbituric acid at low temperatures in magnetized water, as a green-promoting medium, provides 9-substituted-9H-diuracilopyrans...     

Highly stable copper/carbon dot nanofluid

Copper/carbon dot nanohybrids (Cu/CD NHs) were prepared via a facile precipitation method through a disproportionation reaction. The surface characterization was performed by various techniques such as XRD, FTIR and TEM. Then, water-based nanofluids composed of Cu/CD NHs at 0.1 and 0.5 mass% were prepared, and their thermo-physical properties including thermal conductivity, viscosity, density and specific heat were evaluated at various temperatures. The water-based Cu/CD nanofluid demonstrated to be a potential heat transfer fluid with a high stability. It was found that the thermal conductivity can be enhanced by increasing the nanoparticle concentration and temperature. Almost 1.25-fold increase in thermal conductivity has been achieved by raising the temperature up to 50 °C and at the concentration of 0.5 mass%. The heat capacity was found to increase with increasing concentration. Moreover, by increasing temperature the density and viscosity of the as-prepared nanofluid decreased, whereas the heat capacity showed an increasing trend.     

Preparation of Fe3O4@5,10‐dihydropyrido[2,3‐b]quinoxaline‐7,8‐diol copper complex: A capable nanocatalyst for the green synthesis of 1‐substituted 1H‐tetrazoles

Fe₃O₄ magnetic nanoparticles functionalized with 5,10‐dihydropyrido[2,3‐b]quinoxaline‐7,8‐diol were synthesized as was their complex with copper as a novel nanomagnetic iron oxide catalyst via a simple and green method, and characterized using various techniques. The capability of the catalyst was evaluated in the one‐pot three‐component synthesis of different tetrazoles, which showed very good results. Mild reaction conditions, good reusability and simple magnetic work‐up make this methodology interesting for the efficient synthesis of tetrazoles.     

Podophyllotoxin extraction from Linum usitatissimum plant and its anticancer activity against HT‐29, A‐549 and MDA‐MB‐231 cell lines with and without the presence of gold nanoparticles

In recent years, gold nanoparticles (Au‐NPs) have been taken into consideration in nanomedicine due to their excellent biocompatibility, chemical stability and promising optical properties. In this research, podophyllotoxin conjugated with gold nanoparticles (Au‐NPs‐POT) was synthesized and the conjugation of POT with Au‐NPs was confirmed using scanning electron microscopy, mass spectrometry and Fourier transform infrared spectroscopy. The anticancer effects of the product on preclinical models of lung, colon and breast cancers were investigated using MTT test. The analyses showed a direct dose–response relationship. It was found that higher concentrations of POT have more positive effects on the inhibition of cancer cell growth. At POT concentrations of 1, 2.5, 5, 7.5, 10, 15 and 20 ng ml^?1, approximately 50% of the growth of colorectal, lung and breast cancer cell lines was inhibited, while similar results were obtained in the presence of 1, 2, 3, 4 and 5 μg ml^?1 Au‐NPs‐POT. Au‐NPs‐POT exhibited the lowest cytotoxicity due to the presence of POT. The anticancer feature of Au‐NPs‐POT proved the potential to develop better anticancer therapeutics and to open new avenues for treatment of cancers.     

An efficient and one-pot green synthesis of novel 6-oxo-7-aryl-6,7-dihydrochromeno pyrano[2,3-b]pyridine derivatives

A simple and efficient protocol has been developed for the construction of novel 6-oxo-7-aryl-6,7-dihydrochromenopyrano[2,3-b]pyridine derivatives using one-pot, three-component cyclocondensation of 4-hydroxycoumarin, various aromatic aldehydes and 2-aminoprop-1-ene-1,1,3-tricarbonitrile using 10?mol % guanidine hydrochloride as the organocatalyst under solvent-free conditions at 90?°C for the first time. The significant features of this protocol are operational simplicity, provide good to high yields, avoidance of toxic solvents, straightforward work-up, no column chromatographic purification and atom-economy which is considered to be relatively environmentally benign.