Alternative spectrophotometric method for standardization of chlorite aqueous solutions

The chlorite ion is the principal by-product of the treatment of drinking water by chlorine dioxide. In function of the chlorite salt instability, standard solutions of this ion need standardization by iodometric titration, which is a reliable method although labor intensive and time consuming. An alternative method to standardization of aqueous chlorite solutions, based on its direct UV absorption measurement, was presented. Besides the maximum absorption (260 nm) generally used in other studies, the minimum (239 nm) and isosbestic (248 nm) wavelengths were proposed as supplementary points to chlorite quantification and their molar absorptivity coefficients were estimated (155.2 ± 0.6, 104.5 ± 1.0 and 69.0 ± 1.2 L cm⁻¹ mol⁻¹, respectively). The direct spectrophotometric determination of chlorite could be made selectively even in the presence of high concentration of major contaminants (chorine dioxide, chloride and chlorate), being a simple and rapid method, consuming very low volume of sample and generating low quantities of laboratory wastes.     

Generalization of the Bernoulli ODE

In this note, we propose a generalization of the famous Bernoulli differential equation by introducing a class of nonlinear first-order ordinary differential equations (ODEs). We provide a family of solutions for this introduced class of ODEs and also we present some examples in order to illustrate the applications of our result.     

Gamma radiation effects on mechanical properties and morphology of a polyurethane derivate from castor oil

In this study, an adhesive of a polyurethane derivate from castor oil was irradiated with gamma radiation from a ⁶⁰Co source, at doses from 0.2 to 25 kGy. This adhesive polyurethane is considered for use in hospital furniture because it does not liberate dangerous solvents. Hardness and elastic modulus were measured by instrumented indentation with a pyramidal Berkovich indenter, using loads from 0.08–40 mN with a nanoindenter XP. The instrumented indentation hardness was 110 MPa for an untreated sample, increasing to 124 MPa after irradiation with 25 kGy, at penetration depths of about 5 μm. The increases in elastic modulus induced by radiation were less pronounced. This polyurethane is naturally cross-linked and the relative modifications in the hardness are attributed to an additional cross-linking process induced by radiation. X-ray diffraction indicates a slight increase in crystallinity. The roughness measured by atomic force microscopy increases after gamma irradiation.     

Potential of boronic acid functionalized magnetic particles in the adsorption of human antibodies under mammalian cell culture conditions

In this work, we systematically evaluated the potential of using boronic acid functionalized magnetic particles in the capturing of human immunoglobulin G under typical mammalian cell culture conditions. For comparison, Protein A coated magnetic particles were also used. The binding pH was found to significantly influence the adsorption isotherms of boronic acid particles with the higher capacities (0.216 g IgG/g support) being observed at pH 7.4. Comparatively, this value was 0.109 g IgG/g support, for Protein A particles under the same conditions. Both particles revealed very fast adsorption kinetics with more than 70% of the maximum binding capacity being achieved in a few seconds. The effect of glucose and lactate, which are known to interact with boronic acid, was evaluated. For glucose, the binding capacity was significantly influenced by the pH and decreased as pH increased. At pH 9.5, a 70% lower binding capacity was observed for glucose concentrations as low as 0.5 g/l. The effect of lactate was less pronounced and almost pH independent reaching at most 20% decrease in binding capacity. Nevertheless, the effect of both molecules was always lower at pH 7.4. The optimization of the elution conditions enabled complete recovery of bound IgG from boronic acid particles using 50mM Tris-HCl, 200 mM sorbitol, 200 mM NaCl at pH 8.5.     

On the influence of heterogeneity of graphene sheets in the determination of the pore size distribution of activated carbons

We model carbon-based microporous materials, such as activated carbons, taking into account surface defects in the form of geometrical rugosity in the inner surface of each graphitic slit pore. The used model is a simplified variation of the randomly etched graphite (REG) pore model (Seaton et al., Langmuir 13:1199–1204, 1997).     

Chemical mechanism of controlled nitric oxide release from trans-[RuCl([15]aneN4)NO](PF6)2 as a vasorelaxant agent

The nitrosyl ruthenium complex, trans-[RuCl([15]aneN₄)NO](PF₆)₂, ([15]aneN₄?=?1,4,8,12-tetraazacyclopentadecane), exhibits vasorelaxation characteristics attributed to its nitric oxide release properties. The observed in vitro and in vivo vasodilation is dependent on noradrenaline concentration. We report here the chemical mechanism of the reaction between noradrenaline and trans-[RuCl([15]aneN₄)NO](PF₆)₂ in aqueous phosphate buffer solution at pH 7.40. NO measurement by NO-sensor electrode, cyclic voltammetry, ³¹PNMR and HPLC analysis were used to investigate the reduction process as the fundamental step for NO release characteristic of trans-[RuCl([15]aneN₄)NO](PF₆)₂. A supramolecular species containing HPO₄ ^2? as a bridging group between noradrenaline and trans-[RuCl([15]aneN₄)NO](PF₆)₂ is suggested as an intermediate prior to the reduction of the nitrosyl ruthenium complex.     

Encapsulation and survival of a chondrocyte cell line within xanthan gum derivative

A chemical derivative of xanthan gum polysaccharide is investigated as a new artificial matrix for the encapsulation of chondrocytic cells. Toward this goal, a novel micro-droplet generator is developed to produce microcapsules. Microcapsules with an average diameter of 500 μm, smooth surface, and homogeneous size distribution are obtained. ATDC5 cells encapsulated in carboxymethyl xanthan (CMX) microcapsules remain viable and are observed to proliferate for prolonged culture periods with enhanced metabolic activity. Furthermore, retention of the chondrogenic phenotype is exhibited by the cells within CMX, suggesting the ability of this material to be applied in cell-delivery therapies.     

Assessment of surface acidity in mesoporous materials containing aluminum and titanium

The surface acidity of mesoporous molecular sieves of aluminum and titanium was evaluated using four different techniques: n-butylamine volumetry, cyclohexylamine thermodesorption, temperature-programmed desorption of ammonia and adsorption of pyridine. The nature, strength and concentration of the acid sites were determined and correlated to the results of a probe reaction of anthracene oxidation to 9,10-anthraquinone (in liquid phase). In general, the surface acidity was highly influenced by the nature, location and coordination of the metal species (Al and Ti) in the mesoporous samples. Moderate to strong Brönsted acid sites were identified for the Al-MCM-41 sample in a large temperature range. For mesoporous materials containing Ti, the acidity was represented by a combination of weak to moderate Brönsted and Lewis acid sites. The Ti-HMS sample exhibits a higher acidity of moderate strength together with a well-balanced concentration of Brönsted and Lewis acid sites, which enhanced both conversion and selectivity in the oxidation reaction of anthracene.