Enhancing water splitting via weakening H2 and O2 adsorption on NiCo-LDH@CdS due to interstitial nitrogen doping: A close look at the mechanism of electron transfer

This paper is a report on the development of a convenient approach to fabricating a very efficient hybrid photoelectrocatalyst for water splitting.This photoele...     

Study of complexation reactions between alkali and alkaline-earth metal cations with dibenzo-18-crown-6(DB18C6) in mixed nonaqueous solvents using the conductometry method

The complexation reactions between alkali and alkaline-earth metal cations with DB18C6 were studied in acetonitrile-methanol (AN-MeOH) and tetrahydrofuran-threechloromethane (THF-CHCl₃) binary mixtures at different temperatures using the conductometric method. The obtained results show that in most cases, the DB18C6 forms 1:1 complexes with these metal cations and the stability of the complexes is affected by the nature and composition of the mixed solvents. The stability order of complexes in AN-MeOH binary systems was found to be Na⁺ > Li⁺, and in the case of THF-CHCl₃ binary mixtures was Na⁺ > Ba²⁺ > Li⁺. An anomalous and interesting behavior was observed for the case of complexation of a K+ ion with DB18C6 in the AN-MeOH binary mixture and also for complexation of Mg²⁺ and Ca²⁺ cations with this ligand in pure THF and also in THF-CHCl₃ binary systems. The values of the thermodynamic parameters (ΔH _c ^o and ΔS _c ^o ) for complexation reactions obtained from the temperature dependence of the stability constants and the results show that the complexes are both enthalpy-and entropy-stabilized. The text was submitted by the authors in English.     

Syntheses,Physico‐Chemical Studies and Antioxidant Activities of Transition Metal Complexes with a Perimidine Ligand

A series of mononuclear complexes of the type, [MLCl₂] [M = Co^II, Ni^II, Cu^II, and Zn^II] with a pyrimidene‐type ligand, which was synthesized by the reaction of 2‐furaldehyde and 1, 8‐diaminonaphthalene, was obtained. The ligand and its complexes were characterized by elemental analysis, IR, NMR, EPR, and UV/Vis spectroscopy, ESI‐mass spectrometry, magnetic susceptibility, molar conductivity, and thermogravimetric analyses. On the basis of UV/Vis spectroscopic and magnetic susceptibility data, an octahedral arrangement was assigned around all metal ions. The low molar conductivity data for all the complexes show their non‐electrolytic nature. The thermal behavior of the complexes was studied by TGA analyses. The electrochemical study carried out on the Cu^II complex exhibits a quasi reversible redox process. The ligand and its complexes showed potential antioxidant and antimicrobial activities.     

Effect of mass transfer limitations on catalyst performance during reduction and carburization of iron based Fischer-Tropsch synthesis catalysts

Existence of intraparticle mass transfer limitations under typical Fischer-Tropsch synthesis has been reported previously,but there is no suitable study on the existence of intraparticle diffusion limitations under pretreatment steps (reduction and activation) and their effect on catalytic performance for iron based catalysts.In this study,Fe-Cu-La-SiO2 catalysts were prepared by co-precipitation method.To investigate the intraparticle mass transfer limitation under reduction,activation and reaction steps,and its effect on catalytic performance,catalyst pellets with different sizes of 6,3,1 and 0.5 mm have been prepared.All catalysts were calcined,pretreated and tested under similar conditions.The catalysts were activated in hydrogen (5%H2in N2) at 450℃ for 3 h and exposed to syngas (H2/CO=1) at 270℃ and atmospheric pressure for 40 h.Afterwards,FTS reaction tests were performed for approximately 120 h to reach steady state conditions at 290℃,17 bar and a feed flow (syngas H2/CO=1) rate of 3 L/h (STP).Using small pellets resulted in higher CO conversion,FT reaction rate and C5+ productivity as compared with larger pellets.The small pellets reached steady state conditions just 20 h after starting the reaction.Whereas for larger pellets,CO conversion,FT reaction rate and C5+ productivity increased gradually,and reached steady state and maximum values after 120 h of operation.The results illustrate that mass transfer limitations exist not only for FTS reaction but also for the reduction and carburization steps which lead to various phase formation through catalyst activation.Also the results indicate that some effects of mass transfer limitations in activation step,can be compensated in the reaction step.The results can be used for better design of iron based catalyst to improve the process economy.     

Removal and Recovery of UO2(??) from Water Samples Using 2,2′‐Diamino‐4,4′‐bithiazole as a New Reagent for Solid Phase Extraction

A novel sensitive and simple method for rapid and selective extraction, preconcentration and determination of uranyl as its 2,2′‐diamino‐4,4′‐bithiazole (DABTZ) complex by using octadecylsilica columns and spectrophotometry is presented. Extraction efficiency and the influence of flow rates of sample solution and eluent, pH, amount of DABTZ, type and least amount of eluent for elution of uranyl complex from columns, break‐through volume and limit of detection were evaluated. Also the effects of various cationic and anionic interferences on percent recovery of uranyl were studied. Average extraction efficiency of ca. 90% was obtained by elution of the column with minimal amount of solvent in the presence of interferences. The average preconcentration factor, 136 and a detection limit 0.32 ng·mL^?1 were obtained. The method was applied to the recovery and determination of uranyl in different water samples.     

A spectrophotometric method for quantitative determination of lactulose in pharmaceutical preparations

A simple spectrophotometric assay for the quantification of lactulose in pharmaceutical preparations was developed. The method is based on hydrolysis of lactulose under acidic conditions. The hydrolyzed product reacts with resorcinol, giving absorption peaks at 398 and 480 nm. Both absorption wavelengths can be used for the determination of lactulose. The limit of detection of lactulose at 398 nm and 480 nm was 0.075 μg mL⁻¹ and 0.65 μg mL⁻¹, respectively. The calibration was linear in the range of 5–25 μg mL⁻¹. Analytical conditions were optimized, and the method was validated for analysis of pharmaceutical preparations. The determined amount of lactulose was found to be in good agreement with labeled claims in commercial products. The proposed method is economical, convenient, and suitable for the quantification of lactulose in pharmaceutical preparations. The text was submitted by the authors in English.     

Comparative vapour phase FTIR spectra and vibrational assignment of manganese pentacarbonyls derivatives of the type XMn(CO)5: (where X=Br, Cl, I, H, D, CH3, CD3, CF3)

The infrared spectra of pure Mn(CO)(5)X in the region 4000-400 cm(-1) has been obtained in the vapour phase. The observed spectrum has been analyzed to distinguish the fundamental frequencies, the rotational-vibrational and structure, and overtone and combination frequencies. The assignment of the observed vapour phase frequencies to the fundamental modes of vibration has been made on C(4V) symmetry. The weak peaks due to XMn(CO)(4)((13)CO) molecules have been measured and assigned for all molecules. This study provides a comprehensive comparison of these compounds, with all of these data the assignment of frequencies is reviewed and a set of quite unambiguous assignments made. The significant finding in this regards are that, it is not necessary to assume lower than C(4V) symmetry for XMn(CO)(5) as has been done in previous consideration of some infrared spectrum of these compounds.     

Application of a new nanoporous sorbent for extraction and pre-concentration of lead and copper ions

The authors describe a method for the trace determination of copper (II) and lead (II) in water and fish samples using solid-phase extraction via siliceous mesocellular foam functionalised by dithizone. Siliceous mesocellular was functionalised with dithizone, and the resulting sorbent was characterised by scanning electron microscopy, surface area analysis, thermogravimetric/differential thermal analysis and FTIR. Following solid-phase extraction of target ions by the sorbent, copper and lead ions were quantified by flame atomic absorption spectrometry. Factors affecting the sorption and desorption of target ions by the sorbent were evaluated and optimised. The calibration plot is linear in the 1 – 500 μg L^?1 copper (II) and 3–700 μg L^?1 lead (II) concentration range. The relative recovery efficiency in real sample analysis is in the range from 96 to 102%, and precision varies between 1.7 and 2.8%. It is should be noted that the limits of detection for the copper and lead analysis were 0.8 and 1.6 μg L^?1, respectively. Also, the adsorption capacities for copper and lead ions were 120 and 160 mg g^?1, respectively. The obtained pre-concentration factor for the lead and copper ions by the proposed solid-phase extraction was 75. The method was successfully applied to the determination of low levels of copper (II) and lead (II) in tap, Caspian sea, Persian gulf and lake water and also their detection in fish samples.     

The emission spectrum of SeO in the far ultraviolet

The emission spectrum of SeO in the far ultraviolet first observed by Haranath (1) at low dispersion has been photographed in the region 2480-1930 Å under medium resolution and a reanalysis of the vibrational structure of the bands has been presented. Beginning at the longer wavelength end, the spectrum has been analyzed into five band systems which are designated as $\text{c(}{}^1\text{Σ}{}^{\mathrm{+}}\text{)-b(}{}^1\text{Σ}{}^{\mathrm{+}}\text{)}$, x₂-x₁, y₂-y₁, $\text{C(}{}^3\text{Π}\text{)-X}{}^3\text{Σ}{}^{\mathrm{?}}$, and $\text{D(}{}^3\text{Σ}{}^{\mathrm{?}}\text{)-X}{}^3\text{Σ}{}^{\mathrm{?}}$. The lower state of the c-b system is found to be the upper state of the $\text{b(}{}^1\text{Σ}{}^{\mathrm{+}}\text{)-X}{}^3\text{Σ}{}^{\mathrm{?}}$ system observed recently by us (2). The derived constants in cm^?1 for SeO are as follows (the constants of the b state are those derived from Ref. 2).

     

[首页] « 上一页 [5] [6] [7] [8] [9] 10 [11] [12] [13] [14] [15] 下一页 » 末  页»

State	$\text{T}{}_{\mathrm{e}}$	$\text{ω}{}_{\mathrm{e}}$	$\text{ω}{}_{\mathrm{e}}\text{x}{}_{\mathrm{e}}$	λ
$\text{y}{}_2$	$\text{y}{}_1\text{+ 47830}$	974	6.0
$\text{y}{}_1$	$\text{y}{}_1$	906	21.0
$\text{x}{}_2$	$\text{x}{}_1\text{+ 46009}$	993	2.0
$\text{x}{}_1$	$\text{x}{}_1$	877	8.0
$\text{c(}{}^1\text{Σ}{}^{\mathrm{+}}\text{)}$	53080	954	13.0
$\text{D(}{}^3\text{Σ}{}^{\mathrm{?}}\text{)}\text{F}{}_2$	51422	955	9.3
F1	51356	955	8.5	～36
$\text{C(}{}^3\text{Π}\text{)}$	50873	1034	9.3
$\text{b(}{}^1\text{Σ}{}^{\mathrm{+}}\text{)}$	9570.7	834.9	5.5