Flow visualization and analysis of thermal distribution for the nanofluid by the integration of fuzzy c-means clustering ANFIS structure and CFD methods

Journal of Visualization - A nanofluid containing copper (Cu) nanoparticles was simulated in a rectangular cavity using computational fluid dynamic (CFD). The upper and lower walls of the cavity...     

Competitive Self and Induced Aggregation of Calix[4]arene Ethers and Their Interaction with Pinacyanol Chloride and Methylene Blue in Nonaqueous Media

Long chain calix[4]arene ethers have been examined for aggregation in nonaqueous solvents by using UV-vis molecular absorbance spectroscopy. It has been observed that tetraalkylated (alkyl = hexadecyl and octadecyl, respectively) calix[4]arene ethers tend to aggregate in chloroform and tetrahydrofuran, possibly via π–π stacking interactions of the phenyl moieties, and the aggregation process appears to be facilitated by the alkyl chains. The analogous dialkylated compounds do not show any self-aggregation, plausibly due to strong hydrogen bonding between the –OH and the –O– of calix aryl ether which seems to disrupt the aggregation process. Addition of the anionic surfactant sodium dodecylsulfate (SDS) appears to hinder the aggregation process in nonpolar chloroform but the same surfactant facilitates aggregation in the polar tetrahydrofuran. The cationic surfactant (cetyltrimethyl ammonium bromide) and the nonionic surfactant (Brij-35) have no effect on this aggregation process. Unexpectedly, SDS induces aggregation of dialkylated calix[4]arene ethers in chloroform. It has been observed that the aggregated form of the tetraalkylated calix[4]arene ethers tend to increase the dimerization efficiency of cationic dyes (pinacyanol chloride and methylene blue) in chloroform.     

Improved electrical parameters of vacuum annealed Ni/4H-SiC (0 0 0 1) Schottky barrier diode

The reported work has been focused on the improvement of electrical parameters of Schottky diode using vacuum annealing at mild temperature in Ar gas ambient. Nickel Schottky barrier diodes were fabricated on 50 μm epitaxial layer of n-type 4H-SiC (0 0 0 1) substrate. The values of leakage current, Schottky barrier height (?_B), ideality factor (η) and density of interface states (N_SS) were obtained from experimentally measured current–voltage (I–V) and capacitance–voltage (C–V) characteristics before and after vacuum annealing treatment. The data revealed that ?_B, η and reverse leakage current for the as-processed diodes are 1.25 eV, 1.6 and 1.2 nA (at ?100 V), respectively, while for vacuum annealed diodes these parameters are 1.36 eV, 1.3 and 900 pA (at same reverse voltage). Improved characteristics have been resulted under the influence of vacuum annealing because of lesser number of minority carrier generation due to incessant reduction of number of available discrete energy levels in the bandgap of 4H-SiC substrate and lesser number of interface states density at Ni/4H-SiC (0 0 0 1) interface.     

Short time synthesis of high quality carbon nanotubes with high rates by CVD of methane on continuously emerged iron nanoparticles

We report the variation of yield and quality of carbon nanotubes (CNTs) grown by chemical vapor deposition (CVD) of methane on iron oxide-MgO at 900-1000 °C for 1-60 min. The catalyst was prepared by impregnation of MgO powder with iron nitrate, dried, and calcined at 300 °C. As calcined and unreduced catalyst in quartz reactor was brought to the synthesis temperature in helium flow in a few minutes, and then the flow was switched to methane. The iron oxide was reduced to iron nanoparticles in methane, while the CNTs were growing.TEM micrographs, in accordance with Raman RBM peaks, indicate the formation of mostly single wall carbon nanotubes of about 1.0 nm size. High quality CNTs with I_G/I_D Raman peak ratio of 14.5 are formed in the first minute of CNTs synthesis with the highest rate. Both the rate and quality of CNTs degrades with increasing CNTs synthesis time. Also CNTs quality sharply declines with temperature in the range of 900-1000 °C, while the CNTs yield passes through a maximum at 950 °C. About the same CNTs lengths are formed for the whole range of the synthesis times. A model of continuous emergence of iron nanoparticle seeds for CNTs synthesis may explain the data. The data can also provide information for continuous production of CNTs in a fluidized bed reactor.     

Novel modified carbon nanotubes as a selective sorbent for preconcentration and determination of trace copper ions in fruit samples

In this work, multiwalled carbon nanotubes were reacted with N‐[3‐(triet‐hoxysilyl)propyl]isonicotinamide to prepare pyridine‐functionalized carbon nanotubes. This novel sorbent was characterized by infrared spectroscopy, thermal and elemental analysis, and scanning electron microscopy. Functionalized carbon nanotubes were applied for the preconcentration and determination of copper ions using flame atomic absorption spectrometry. Various parameters such as sample pH, flow rate, eluent type and concentration, and its volume were optimized. Under optimal experimental conditions, the limit of detection, the relative standard deviation, and the recovery of the method were 0.65 ng/mL, 3.2% and 99.4%, respectively. After validating the method using standard reference materials, the new sorbent was applied for the extraction and determination of trace copper(II) ions in fruit samples.     

Multivariate optimization of the hollow fiber-based liquid phase microextraction of lead in human blood and urine samples using graphite furnace atomic absorption spectrometry

The present study developed a liquid-phase microextraction based on hollow fiber coupled with graphite furnace atomic absorption spectrometry for the effective extraction and quantitation of lead from urine and blood samples. A multivariate design was used for the optimization of the experimental conditions to ensure high extraction efficiency. Six factors (solvent type, chelating agent, time extraction, temperature, donor phase pH, and acceptor phase pH) were obtained by screening eleven factors of the Plackett–Burman design; these were optimized using the central composite design of response surface methodology. The optimum conditions of donor phase pH, acceptor phase pH, temperature, and extraction time were 5, 9.5, 40 °C, and 120 min, respectively. In addition, oleic acid containing dicyclohexyl-18-krone-6 was used for the membrane phase. Under optimal conditions, the enrichment factor, limit of detection, and limit of quantification were obtained in the ranges of 21.3–18.7, 0.001–0.002 ng mL^?1, and 0.008–0.01 ng mL^?1, respectively, in urine and blood samples. The linearity of the calibration curve was established for the concentration of Pb in the range of 1–50 ng mL^?1 (r²?=?0.9983). Finally, the performance of the developed method was evaluated for the determination of lead in urine and blood samples, and satisfactory results were obtained (RSDs <?10% with recovery >?95).     

Synthesis and Characterization of Polyesters Based on Diethylketone Moiety

A new class of unsaturated polyesters based on diethylketone have been prepared by interfacial polymerization of 2,4-bis（4-hydroxybenzylidene）-3-pentanone（I） and 2,4-bis（4-hydroxy-3-methoxybenzylidene）-3-pentanone（II） with 4,4’-azodibenzoyl chloride and 3,3’-azodibenzoyl chloride at ambient temperature. The model compounds were synthesized by reaction of（I） and（II） with benzoyl chloride. The new monomers, model compounds and polyesters have been characterized by different spectral analyses. The polyesters have inherent viscosity of 0.55-0.80 d L/g and moderate number average molecular weight（Mn） in the range of 6150-7400 g/mol. Most of the compounds exhibited their solubility in aprotic solvents while partial solubility in various halogenated organic solvents was observed. The temperatures of 10% weight loss were high（225-330 °C） in nitrogen, indicating that these polyesters have excellent thermal stability. Doping with iodine dramatically raised the conductivity and produced brown colored semiconductive polymers with a maximum conductivity of 2.7 × 10-6 --1cm-1. Moreover, the morphological properties of selected example of polyesters were detected by SEM.     

Ellagic acid and human cancers: a systems pharmacology and docking study to identify principal hub genes and main mechanisms of action

Research on anticancer properties of natural compounds, as effective materials that are available while causing minimal side effects, is growing. Ellagic acid (EA) is a well-known polyphenolic compound, which has been found in both free and complex modes in several medicinal plants such as pomegranate, walnut, and berries. Although many articles have reported anticancer properties for this compound, its mechanism of action has not been fully elucidated. In this study, we used several online and offline bioinformatics tools and databases to identify the mechanism of action of EA on various types of human malignancies including bladder, blood, breast, cervical, colorectal, liver, pancreas, and prostate cancers. In this context, after identifying and extracting EA-affected human genes/proteins that have been reported in various references, we built the related gene networks and determined functional hub genes. In addition, docking was performed to recognize target proteins that react directly with EA and are in fact most affected by this compound. Our findings revealed that EA exerts its anticancer effects by influencing specific hub genes in various types of cancers. Moreover, different cellular signaling pathways are affected by this natural compound. Generally, it turned out that EA probably exerts most of its anticancer activities, through induction of apoptosis, as well as P53 and WNT signaling pathways, and also by affecting the expression of several hub genes such as CDKN1A, CDK4, CDK2, CDK6, TP53, JUN, CCNA2, MAPK14, CDK1, and CCNB1 and especially interactions with some related proteins including P53, CDK6, and MAPK14.