Application of a palladium hexacyanoferrate film-modified aluminum electrode to electrocatalytic oxidation of hydrazine.

A palladium hexacyanoferrate (PdHCF) film as an electrocatalytic material was obtained at an aluminum (Al) electrode by a simple electroless dipping method. The modified Al electrode demonstrated a well-behaved redox couple due to the redox reaction of the PdHCF film. The PdHCF film showed an excellent electrocatalytic activity toward the oxidation of hydrazine. The electrocatalytic oxidation of hydrazine was studied by cyclic voltammetry and rotating disk electrode voltammetry techniques. A calibration graph obtained for the hydrazine consisted of two segments (localized at concentration ranges 0.39-10 and 20-75 mM). The rate constant k and transfer coefficient alpha for the catalytic reaction and the diffusion coefficient of hydrazine in the solution D, were found to be 3.11 x 10(3) M(-1) s(-1), 0.52 and 8.03 x 10(-6) cm2 s(-1) respectively. The modified electrode was used to amperometric determination of hydrazine in photographic developer. The interference of ascorbic acid and thiosulfate were investigated and greatly reduced using a thin film of Nafion on the modified electrode. The modified electrode indicated reproducible behavior and a high level of stability during electrochemical experiments, making it particularly suitable for analytical purposes.     

Spatial distribution and sources of polycyclic aromatic hydrocarbons (PAHs) in green mussels (Perna viridis) from coastal areas of Peninsular Malaysia: implications for source identification of perylene

Distribution of polycyclic aromatic hydrocarbons (PAHs) was determined in green mussels (Perna viridis) from various sites in coastal waters of Peninsular Malaysia between August 2004 and January 2007, in order to assess contamination by petroleum hydrocarbons. The range of ∑PAHs detected in mussels was from 766 to 110500 (ng/g lipid wt.). High concentrations of PAHs were found in mussel tissues collected near Penang Bridge. The ratios of methyl phenanthrenes to phenanthrene (∑MP/P ratio) for Penang, Kg. Pasir Puteh and Tebing Runtuh (Johore Straits) were greater than 2, indicating extensive input of petrogenic PAHs. The results indicated that male individuals elevated more considerable concentrations of PAHs in their soft tissues in comparison to female individuals. The results of independent sample T-test showed that there were no significant differences (p > 0.05) between male and female mussels analysed in the Pasir Panjang station. Negative significant correlations (r = ?0.890, p < 0.01) and (r = ?0.0655, p < 0.05), were found between weight and total of PAHs in female and male species, respectively. This indicated that body weight of each individual was not affected by the PAHs concentrations. The present study proposes the use of soft tissue of Perna viridis as a biomonitor of perylene bioavailability and contamination in coastal waters of Peninsular Malaysia.     

Green synthesis of amorphous calcium phosphate nanopowders using Aloe Vera plant extract and assessment of their cytotoxicity and antimicrobial activities

Journal of Sol-Gel Science and Technology - Considering the existing various sources that can supply the nano-biomaterials that are related to the Amorphous Calcium Phosphate (ACP) family, Aloe...     

In situ sol–gel fabrication of new poly(amide–ether–imide)/titania (TiO<Subscript>2</Subscript>) nanocomposite thin films containing <Emphasis Type="SmallCaps">l</Emphasis>-leucine moieties

In this study, the synthesis, morphology, and thermal properties of amino acid containing polyimide/titania nanohybrid films are investigated. At first, a chiral diamine containing l-leucine moieties in the structure (synthesized previously) was polymerized with 4,4′-oxydiphthalic anhydride in extremely dry conditions. Resulted poly(amic acid) (PAA) was mixed with a moisture-sensitive titania precursor (tetraethyl orthotitanate [Ti(OEt)₄]) and casted to a dust-free glass plate. The water derived from thermal imidization of PAA hydrolyzed Ti(OEt)₄ to titania nanoparticles with almost spherical shapes. The thermogravimetric analysis of various nanocomposites confirms the improvement in the thermal stability with the increase in the percentage of titania nanoparticle. The transmission electron microscopy of nanohybrid films with 3%, 5%, and 10% w/w of titania contents confirms well dispersion of nanoparticles in the polymer ground. The X-ray diffraction spectra showed that the titania contents have amorphous structure.     

Rank annihilation factor analysis method for spectrophotometric study of second-order reaction kinetics

In this study several methods are described to determine the rate constant of a second-order reaction in the form of A+B→C. These approaches allow circumventing a rank deficiency inherent of a second-order reaction when the spectroscopic data is influenced by additional source of variance. Classically, to determine the unknown rate constant in this kind of systems, one needs to have extra knowledge about the system, including the spectra of the reactants or product and the exact kinetics. In the case of the presence of an unknown phenomenon in the data set that cannot be explained by the model, such as baseline drift, the estimated rate constant might be erroneous. Present work is a modification of the rank annihilation factor analysis (RAFA) algorithm by inclusion of I) pure spectra of reactants, or IIA) mean centering step, or IIB) mean spectrum. The proposed methods can interestingly be applied on a single kinetic run. The performances of the new methods have been evaluated by applying them to analysis of simulated and experimental data.     

Ab‐Initio calculations of the CO adsorption and dissociation on substitutional Fe–Cu surface alloys relevant to Fischer–Tropsch Synthesis: bcc‐(Cu)Fe(100) and fcc‐(Fe)Cu(100)

Direct CO dissociation is seen the main path of the first step in the Fischer–Tropsch Synthesis (FTS) on the reactive iron surfaces. Cu/Fe alloy film is addressed with various applications over face‐centered‐cubic (fcc)‐Cu and body‐centered‐cubic (bcc)‐Fe in the FTS, i.e. preventing iron carbide formation (through direct CO dissociation) by moderating the surface reactivity and facilitating the reduction of iron surfaces, respectively. In this study by density functional theory, the stable configurations of CO molecule on various Cu/Fe alloys over fcc‐Cu(100) and bcc‐Fe(100) surfaces with different CO coverage (25% and 50%) have been evaluated. Our results showed that the ensemble effect plays a fundamental role to CO adsorption energy on the surface alloys over bcc‐Fe(100); on the other hand, the ligand effect determines the CO stability on the fcc‐Cu(100) surface alloys. CO dissociation barrier was also calculated on the surface alloys that showed although the CO dissociation process is thermodynamically possible on the more reactive surface alloys, but according to their high barrier, CO dissociation does not occur directly on these surfaces. Copyright © 2013 John Wiley & Sons, Ltd.     

Ab initio and DFT studies on 1-(thionitrosomethylene) hydrazine: conformers, energies, and intramolecular hydrogen-bond strength

In the current study, we present an intramolecular HB, molecular structure, π-electrons delocalization and vibrational frequencies analysis of 25 possible conformers of 1-(thionitrosomethylene) hydrazine by means of DFT (B3LYP), MP2 methods in conjunction with the 6-311++G** and augmented correlation-consistent polarized-valence triple-zeta basis sets and G2MP2 theoretical level. The influence of the solvent on the stability order of conformers and the strength of intramolecular hydrogen-bonding was considered using the Tomasi’s polarized continuum model. Statistical analyses of quantitative definitions of aromaticity, nucleus independent chemical shift, harmonic oscillator model of aromaticity, aromatic fluctuation index, and the π-electron delocalization parameter (Q) as a geometrical indicator of a local aromaticity, evaluated for this conformers. Further verification of the obtained transition state structures were implemented via intrinsic reaction coordinate (IRC) analysis. Calculations of the ¹H NMR chemical shift at GIAO/B3LYP/6-311++G** levels of theory are also presented. The calculated highest occupied molecular orbital (MO) and lowest unoccupied MO energies show that charge transfer occur within the molecule. Hydrogen-bond energies for H-bonded conformers were obtained from Espinosa method and the natural bond orbital theory and the atoms in molecules theory were also applied to get a more precise insight into the nature of such H-bond interactions.     

Comparison of the performance of different modified graphene oxide nanosheets for the extraction of Pb(II) and Cd(II) from natural samples

Graphene nanosheets were modified with amino groups and the resulting material was used as a sorbent for the extraction of cadmium and lead ions. The nanosheets were characterized by IR spectroscopy, transmission electron microscopy, thermal gravimetric analysis and elemental analysis. The effects of sample pH, eluent parameters (type, concentration and volume of eluent), flow rates (of both sample and eluent), and of a variety of other ions on the efficiency of the extraction of Cd(II) and Pb(II) were optimized. Following solid phase extraction, the elements were determined by FAAS. The limits of detection are <0.9 μg L^?1 for Pb(II) and <5 ng L^?1 for Cd(II). The relative standard deviations are <2.2 %. The method was validated by analyzing several certified reference materials and was then used for Pb(II) and Cd(II) determination in natural waters and vegetables.