新生儿硬肿症危险因素分析

为探讨新生儿硬肿症发病的危险因素，以便有效地预防该病，以41例硬肿症新生儿为研究对象，并设疾病对照组，运用多元Logistic回归，对8项可疑因素进行了分析。结果表明，早产，低体重，窒息和感染， 毒最终进入方程（P＞0．05），且OR值均大于1，是硬肿症发病的危险因素。硬肿症是原发病的一个并发症和严重征兆。寒冷不是本地区硬肿症的常见病因。流动人口的新生儿是硬肿症的高危人群。加强围产期母婴保健，普及新法复苏，感染的预防和早期有效干预，早产，低体重儿和重新新生儿热能供给和维持内环境平衡是预防硬肿症的有效措施。     

南药巴戟天中十二种无机元素与药效关系的进一步研究

在初步研究的基础上，进一步研究了不同产地巴戟天的无机元素含量差异，通过对比各元素含量、相关系数及TE图谱，说明地道药材与非地道药材的巴戟天，其特征元素的含量存在非常明显的差异，要使大面积扩种的药材提高药效，建议根据当地土壤含Mn、Fe、Cr、Co、Ni的含量，以旋微量元素肥料的方法来补充这些元素在土壤中的不足。但在微量元素肥料配方中，应注意巴戟天吸收土壤中的元素时的协同作用和拮抗作用。     

Redox behaviour of cysteine in the presence of ammonium trioxovanadate(V)

The interaction of ammonium trioxovanadate(V) with cysteine in aqueous solution was studied by cyclic voltammetry and absorption spectroscopy techniques. In the absence of cysteine, the cyclic voltammogram (CV) of ammonium trioxovanadate(V) solution in 0.1 M phosphate buffer (pH 7) gave two peaks at -0.130 V (reversible) and -0.400 V (irreversible). These peaks (-0.130 V, -0.400 V) can be attributed to V(V)/V(IV) and V(IV)/V(III) redox processes, respectively. In the presence of cysteine at low scan rate (40 mV/s), the peak at -0.780 V, which is assigned to the irreversible reduction of free cystine, was observed. In addition, the reduction peak of the disulfidic anion S(2)(2-) was seen at -0.650 V. Under aerobic conditions, the peaks of the disulfidic anion S(2)(2-) and free cystine are well separated. From electronic spectra of ammonium trioxovanadate(V) and cysteine mixtures, LMCT transition associated with V(V)-cyteine complex was obtained at 743 nm. The stoichiometry (ML(2)) and stability constant (log beta(1:2)=6.67) of V(V)-cysteine complex were determined by means of mole ratio method.     

微波消化技术在生物微量元素测定中的应用

用微波消化技术消化了多种食物样品．与传统的干、湿消化法相比，微波消化更加简单、快速、节省、沾污少、损失少、环境污染少．用原子吸收测定样品中的Ｆｅ，Ｃ．Ｖ＜２％，加标回收率为９８％～１００％，测定美国生物标准物质牛肝中的Ｆｅ的相对误差为０．３％，结果令人满意．     

Polyelectrolyte multilayers and degradable polymer layers as multicompartment films

Polyelectrolyte multilayers are now a well established concept with numerous potential applications in particular as biomaterial coatings. To timely control the biological activity of cells in contact with a substrate, multicompartment films made of different polyelectrolyte multilayers deposited sequentially on the solid substrate constitute a promising new approach. In a first paper (Langmuir 2004, 20, 7298) we showed that such multicompartment films can be designed by alternating exponentially growing polyelectrolyte multilayers acting as reservoirs and linearly growing ones acting as barriers. In the present study, we first demonstrate however that these barriers composed of synthetic polyelectrolytes are not degraded despite the presence of phagocytic cells. We propose an alternative approach where exponentially growing poly(L-lysine)/hyaluronic acid (PLL/HA) multilayers, used as reservoirs, are alternated with biodegradable polymer layers consisting in poly(lactic-co-glycolic acid) (PLGA) and acting as barriers for PLL chains that diffuse within the PLL/HA reservoirs. We first show that these PLGA layers can be deposited alternatively with PLL/HA multilayers leading to polyelectrolyte multilayer/hydrolyzable polymeric layer films and acting as a reservoirs/barriers system. Bone marrow cells seeded on these films ending by a PLL/HA reservoir rapidly degrade it and internalize the PLL chains confined in this reservoir. Then the cells degraded locally the PLGA barrier and internalize the PLL localized in a lower (PLL/HA) compartment after 5 days of seeding. By changing the thickness of the PLGA layer, we hope to be able to tune the time delay of degradation. Such mixed architectures made of polyelectrolyte multilayers and hydrolyzable polymeric layers could act as coatings allowing us to induce a time scheduled cascade of biological activities. We are currently working on the use of comparable films with compartments filled by proteins or peptides and in which the degradation of the barriers results from a hydrolysis over tunable time scales.     

Layer by layer buildup of polysaccharide films: physical chemistry and cellular adhesion aspects

The formation ofpolysaccharide films based on the alternate deposition of chitosan (CHI) and hyaluronan (HA) was investigated by several techniques. The multilayer buildup takes place in two stages: during the first stage, the surface is covered by isolated islets that grow and coalesce as the construction goes on. After several deposition steps, a continuous film is formed and the second stage of the buildup process takes place. The whole process is characterized by an exponential increase of the mass and thickness of the film with the number of deposition steps. This exponential growth mechanism is related to the ability of the polycation to diffuse "in" and "out" of the whole film at each deposition step. Using confocal laser microscopy and fluorescently labeled CHI, we show that such a diffusion behavior, already observed with poly(L-lysine) as a polycation, is also found with CHI, a polycation presenting a large persistence length. We also analyze the effect of the molecular weight (MW) of the diffusing polyelectrolyte (CHI) on the buildup process and observe a faster growth for low MW chitosan. The influence of the salt concentration during buildup is also investigated. Whereas the CHI/HA films grow rapidly at high salt concentration (0.15 M NaCl) with the formation of a uniform film after only a few deposition steps, it is very difficult to build the film at 10(-4) M NaCl. In this latter case, the deposited mass increases linearly with the number of deposition steps and the first deposition stage, where the surface is covered by islets, lasts at least up to 50 bilayer deposition steps. However, even at these low salt concentrations and in the islet configuration, CHI chains seem to diffuse in and out of the CHI/HA complexes. The linear mass increase of the film with the number of deposition steps despite the CHI diffusion is explained by a partial redissolution of the CHI/HA complexes forming the film during different steps of the buildup process. Finally, the uniform films built at high salt concentrations were also found to be chondrocyte resistant and, more interestingly, bacterial resistant. Therefore, the (CHI/HA) films may be used as an antimicrobial coating.     

Primary photodamage sites and mitochondrial events after Foscan photosensitization of MCF-7 human breast cancer cells

To determine the initial photodamage sites of Foscan-mediated photodynamic treatment, we evaluated the enzymatic activities in selected organelles immediately after light exposure of MCF-7 cells. The measurements indicated that the enzymes located in the Golgi apparatus (uridine 5'-diphosphate galactosyl transferase) and in the endoplasmic reticulum (ER) (nicotinamide adenine dinucleotide [reduced] [NADH] cytochrome c [cyt c] reductase) are inactivated by the treatment, whereas mitochondrial marker enzymes (cyt c oxidase and dehydrogenases) were unaffected. This indicates that the ER and the Golgi apparatus are the primary intracellular sites damaged by Foscan-mediated PDT in MCF-7 cells. We further investigated whether the specific mitochondria events could be associated with Foscan photoinduced cell death. The dose response profiles of mitochondrial depolarization and cytochrome c release immediately after Foscan-based PDT were very different from that of overall cell death. By 24 h post-PDT the fluence dependency was strikingly similar for both mitochondrial alterations and cell death. Therefore, although mitochondria are not directly affected by the treatment, they can be strongly implicated in Foscan-mediated MCF-7 cell death by late and indirect mechanism.     

Synthesis and deprotonation of 2-(pyridyl)phenols and 2-(pyridyl)anilines

2-(2- and 3-Pyridyl)anilines (1, 2), 2,2-dimethyl-N-[2-(2- and 3-pyridyl)phenyl]propanamides (3, 4), and 2-, 3- and 4-(2-methoxyphenyl)pyridines (7-9) are readily synthesized using cross-coupling reactions. Whereas the amines 1, 2 undergo side reactions, the corresponding amides 3, 4 are deprotonated with lithium 2,2,6,6-tetramethylpiperidide (LTMP): the compound 3 at C6' under in situ quenching, and the compound 4 at C4'. When the ether 7 is subjected to the same reagent, lithiation occurs at C6'.     

A general strategy for the diastereoselective synthesis of 2,6-diaryl-3,7-dioxabicyclo[3.3.0]octane lignans

A strategy for the stereoselective synthesis of all the possible diastereoisomers of the 2,6-diaryl-3,7-dioxabicyclo[3.3.0]octane (furofuran) lignans from a single dihydrofuran precursor is described. The key steps involve a diastereocontrolled templated cationic cyclization followed by stereoselective reduction of the resulting methyl glycoside.     

An insight into the aromaticity of fullerene anions: experimental evidence for diamagnetic ring currents in the five-membered rings of C(60)(6-) and C(70)(6-)

Reduction of the two "closed" [6,6] methanofullerenes, [6,6]C(61)H(2) (1) and [6,6]C(71)H(2) (5), to the corresponding hexaanions with lithium metal causes the bridgehead-bridgehead bonds to open, at least partially, and this change gives rise to diamagnetic ring currents in the resulting homoconjugated six-membered rings (6-MRs). These new ring currents shield the overlying hydrogen atoms on the methylene bridge and induce upfield shifts of 1.60 and 0.11 ppm in their (1)H NMR resonances, respectively. Analogous reduction of the already "open" [5,6]methanofullerenes, [5,6]C(61)H(2) (2) and [5,6]C(71)H(2) (3 and 4), only slightly enhances the shielding of the hydrogen atoms over the homoconjugated 6-MRs (upfield shifts of 0.13, 0.68, and 0.14 ppm, respectively) but leads to exceptionally strong diamagnetic ring currents in the homoconjugated five- membered rings (5-MRs), as evidenced by dramatic shielding of the hydrogen atoms situated over them (upfield shift of 5.01, 6.78, and 1.63 ppm, respectively). The strongest shielding is seen for the hydrogen atom sitting over the 5-MR at the pole of C(71)H(2)(6)(-) (delta = -0.255 ppm) indicating that the excess charge density is concentrated at the poles.