Preconcentration of trace elements from water samples on a minicolumn of yeast (Yamadazyma spartinae) immobilized TiO2 nanoparticles for determination by ICP-AES

A trace element preconcentration procedure is described utilizing a minicolumn of yeast (Yamadazyma spartinae) immobilized TiO₂ nanoparticles for determination of Cr, Cu, Fe, Mn, Ni and Zn from water samples by inductively coupled plasma atomic emission spectrometry. The elements were quantitatively retained on the column between pH 6 and 8. Elution was made with 5% (v/v) HNO₃ solution. Recoveries ranged from 98 ± 2 (Cr) to 100 ± 4 (Zn) for preconcentration of 50 mL multielement solution (50 μg L⁻¹). The column made up of 100 mg sorbent (yeast immobilized TiO₂ NP) offers a capacity to preconcentrate up to 500 mL of sample solution to achieve an enrichment factor of 250 with 2 mL of 5% (v/v) HNO₃ eluent. The detection limits obtained from preconcentration of 50 mL blank solutions (5%, v/v, HNO₃, n = 11) were 0.17, 0.45, 0.25, 0.15, 0.33 and 0.10 μg L⁻¹ for Cr, Cu, Fe, Mn, Ni and Zn, respectively. Relative standard deviation (RSD) for five replicate analyses was better than 5%. The retention of the elements was not affected from up to 500 μg L⁻¹ Na⁺ and K⁺ (as chlorides), 100 μg L⁻¹ Ca²⁺ (as nitrate) and 50 μg L⁻¹ Mg²⁺ (as sulfate). The method was validated by analysis of freshwater standard reference material (SRM 1643e) and applied to the determination of the elements from tap water and lake water samples.     

A practical approach for generation of WO3-based flexible electrochromic devices

Journal of Solid State Electrochemistry - We managed to provide one-step facile electrochromic device (ECD) preparation to incorporate two cathodic coloring components into lithium ion (Li+)-doped...     

Some Novel Conducting Polythiophene Derivatives: Theoretical Analysis,Synthesis, Characterization and Electroreological Properties

A series of alternating phylene and symmetrically bithiophene containing repeat units and the respective homopolymers have been synthesized and characterized by combining FTIR, UV-Vis spectroscopy, four probe conductivity measurement, TGA and SEM analysis. Quantum mechanical calculations of the structures and infrared spectra of the monomers and respective dimers were compared with experimental results. The polymers are soluble in N-methyl-pyrrolidone (NMP). The samples have conductivities of 10^?5 S/cm levels. Thermal degradation analysis results indicated that poly-bithiophene derivatives have higher thermal stabilities than poly-monothiophene derivatives. All samples exhibited different surface morphologies. The electrorheological (ER) properties of polymer suspensions in silicone oil were prepared and ER behavior was investigated as a function of shear rate, electric field strength and frequency.     

DNA hybridization electrochemical biosensor using a functionalized polythiophene

A simple and label-free electrochemical sensor for recognition of the DNA sensor event was prepared by electrochemical polymerization of 4-hydroxyphenyl thiophene-3-carboxylate. Poly(4-hydroxyphenyl thiophene-3-carboxylate) (PHPT) was synthesized electrochemically onto glassy carbon electrode and characterized by cyclic voltammetry, FTIR and AFM measurements. An ODN-probe was physisorbed onto PHPT film and tested on hybridization with complementary ODN segments. A biological recognition can be monitored by comparison with electrochemical signal (cyclic voltammogram) of single and double strand state oligonucleotide. The oxidation current of double strand state oligonucleotide is lower than that of single strand, that is corresponding to the decrease of electroactivity of PHPT with the increase of stiffness of polymer structure. Physisorbed ODN-probe and its hybridization were observed morphologically onto ITO electrodes using AFM. The sensitivity of the electrochemical sensor is 0.02 μA/nmol, detection limit is 1.49 nmol and it has good selectivity.     

Fabricating polypyrrole/tungsten oxide hybrid based electrochromic devices using different ionic liquids

A facile approach of polypyrrole (PPy)/tungsten oxide (WO₃) composites electrosynthesized in ionic liquids for fabrication of electrochromic devices is discussed. The electrochromic properties of PPy/tungsten oxide nanocomposite films (PPy/WO₃) prepared in the presence of four different ionic liquids, 1‐butyl‐3‐methylimidazolium tetrafluoroborate (BMIMBF₄), 1‐butyl‐3‐methylimidazolium hexafluorophosphate (BMIMPF₆), 1‐butyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl) imide (BMIMTFSI), and 1‐butyl‐1‐methylpyrrolidinium bis(trifluoromethylsulfonyl) imide (BMPTFSI) were investigated in detail. Cyclic voltammetry results revealed that PPy/WO₃ nanocomposite films have much more electrochemical activity than those of WO₃ and PPy film. The electrochromic contrast, coloration efficiency, and switching speed of the composite films were determined for electrochromic characteristics. The maximum contrast and the maximum coloration efficiency values were measured as 33.25% and 227.89 cm²/C for the PPy/WO₃/BMIMTFSI composite film. Copyright © 2015 John Wiley & Sons, Ltd.     

Voltammetric Determination of Adrenaline Using a Poly(1‐Methylpyrrole) Modified Glassy Carbon Electrode

A voltammetric method using a poly(1‐methylpyrrole) modified glassy carbon electrode was developed for the quantification of adrenaline. The modified electrode exhibited stable and sensitive current responses towards adrenaline. Compared with a bare GCE, the modified electrode exhibits a remarkable shift of the oxidation potentials of adrenaline in the cathodic direction and a drastic enhancement of the anodic current response. The separation between anodic and cathodic peak potentials (ΔEp) for adrenaline is 30 mV in 0.1 M phosphate buffer solution (PBS) at pH 4.0 at modified glassy carbon electrodes. The linear current response was obtained in the range of 7.5 × 10^?7 to 2.0 × 10^?4 M with a detection limit of 1.68 × 10^?7 M for adrenaline by square wave voltammetry. The poly(1‐methypyrrole)/GCE was also effective to simultaneously determine adrenaline, ascorbic acid and uric acid in a mixture and resolved the overlapping anodic peaks of these three species into three well‐defined voltammetric peaks in cyclic voltammetry. The modified electrode has been successfully applied for the determination of adrenaline in pharmaceuticals. The proposed method showed excellent stability and reproducibility.     

Thermally Stable Schiff Base and its Metal Complexes: Molecular Docking and Protein Binding Studies

In this paper, interaction of Schiff base and its metal complexes carrying naphthalene ring in the structure with bovine serum albumin (BSA) were investigated using UV-vis absorption, fluorescence spectroscopies and molecular docking methods. The effect on the binding mechanism and properties of these compounds containing metal-free, iron and copper ions were also investigated. The fluorescence spectroscopy results showed that fluorescence intensity of BSA in the presence of different concentration of ligands was decreased through a static quenching mechanism. Binding constants (KSV, Kbin and Ka) and thermodynamic parameters (ΔG, ΔH and ΔS) for the ligand-protein interactions were also determined. ΔG values of ligand-protein interaction were calculated in the range ? 6.3 to ?5.5 kcal/mol. These negative values showed that binding process is spontaneous and, hydrogen bonding and van der Waals force were main interaction of the protein and ligands. ΔH and ΔS value were also calculated in the range of 1.10 to 1.26 kJ/mol and 0.133 to 0.135 kJ/mol. K, respectively. These positive values indicated that the binding process between ligands and BSA are endothermic and electrostatic interaction, respectively.     

Development of Ubiquitin‐Based Probe for Metalloprotease Deubiquitinases

Deubiquitinases (DUBs) are a family of enzymes that regulate the ubiquitin signaling cascade by removing ubiquitin from specific proteins in response to distinct signals. DUBs that belong to the metalloprotease family (metalloDUBs) contain Zn²⁺ in their active sites and are an integral part of distinct cellular protein complexes. Little is known about these enzymes because of the lack of specific probes. Described here is a Ub‐based probe that contains a ubiquitin moiety modified at its C‐terminus with a Zn²⁺ chelating group based on 8‐mercaptoquinoline, and a modification at the N‐terminus with either a fluorescent tag or a pull‐down tag. The probe is validated using Rpn11, a metalloDUB found in the 26S proteasome complex. This probe binds to metalloDUBs and efficiently pulled down overexpressed metalloDUBs from a HeLa cell lysate. Such probes may be used to study the mechanism of metalloDUBs in detail and allow better understanding of their biochemical processes.     

Thermal Stress in Functionally Graded Plates with a Gradation of the Coefficient of Thermal Expansion Only

Experimental Mechanics - Experimental thermal stress analyzes of functionally graded materials should be performed accurately to validate existing numerical and analytical analyzes. The variation...