The “dimer nucleophile mechanism” for reactions with rate‐determining first step: Derivation of the whole kinetic law and further treatment of kinetic results

Overwhelming evidence has been previously reported for the existence of the so‐called “dimer nucleophile mechanism” in aromatic nucleophilic substitutions by amines in aprotic solvents, for which the most prominent feature is the fourth‐order kinetics (third order in amine) that has been observed with many different substrate–nucleophile systems, especially those in which departure of the nucleofuge is the rate‐determining step. The mechanism has been confirmed by several other features, although other alternative mechanisms were suggested to explain the fourth‐order kinetics, no one has been able to explain the other above‐mentioned features. The present paper affords additional experimental evidence and derivation of the kinetic expressions for reactions with good nucleofugues, where the first step is rate determining. The work involves studies of the reactions of 2,4‐dinitrofluorobenzene and 2,4‐dinitrochlorobenzene with aniline and with alkyldiamines in toluene. The novelty of this work lies in the selection of substrate–nucleophile systems exhibiting kinetic behavior that allows estimations of the different k's involved. The satisfactory agreement between the quotients of k's calculated from sets of data obtained under different reaction conditions hereby reported indicates that the assumptions made are correct and that the whole treatment applied to the kinetic data is justified. All together, the results fit well with the reaction scheme involving the dimer nucleophile mechanism, adding new evidence to this mechanism that it is well established in the current literature. © 2010 Wiley Periodicals, Inc. Int J Chem Kinet 42: 735–742, 2010     

Effect of molecular binding to a semiconductor on metal/molecule/semiconductor junction behavior

Diodes made by (indirectly) evaporating Au on a monolayer of molecules that are adsorbed chemically onto GaAs, via either disulfide or dicarboxylate groups, show roughly linear but opposite dependence of their effective barrier height on the dipole moment of the molecules. We explain this by Au-molecule (electrical) interactions not only with the exposed end groups of the molecule but also with its binding groups. We arrive at this conclusion by characterizing the interface by in situ UPS-XPS, ex situ XPS, TOF-SIMS, and Kelvin probe measurements, by scanning microscopy of the surfaces, and by current-voltage measurements of the devices. While there is a very limited interaction of Au with the dicarboxylic binding groups, there is a much stronger interaction with the disulfide groups. We suggest that these very different interactions lead to different (growth) morphologies of the evaporated gold layer, resulting in opposite effects of the molecular dipole on the junction barrier height.     

Application of some physical organic chemistry models to the study of oil spills residues in Patagonian soils

The present study focuses on the application of some physical organic chemistry (POC) models for a better understanding of the interactions between oil spills and soil. By studying the sorption behavior of pure compounds, it was possible to examine the application of the multilayer model to the prediction of crude oil isotherms. The difference between the predicted and experimental oil isotherms was only 13%, which indicates the reliability of the model. The distribution coefficients, K_d, of soil samples containing oil residuals of different ages, were also determined using methanol as a co‐solvent. Desorption experiments showed that they are a function of the polarity of the liquid phases; the K_ds, calculated by applying a model derived from the solvophobic theory, increase with increasing age. On the other hand, the natural attenuation of oil spills was studied by using GC and ¹H NMR techniques. Signals for four types of aliphatic and for the aromatic protons were clearly assigned; signals for alcohol (OH) and carboxylic (COOH) protons were also observed; compounds exhibiting these polar groups are usually not detected in the GC–FID conventional analysis. The principal component analysis (PCA) of K_d, and the parameters determined by GC and NMR, showed that the first and second PC, accounted for more than 95 and 81% of variance, for NMR and GC parameters, respectively. The detailed results suggest that the ¹H NMR data would be more useful than GCs to evaluate the environmental transformations that oil spills undergo in Patagonian soils. Nevertheless, direct extrapolation of the present results to other environments is not possible because the changes depend strongly on the original chemical composition of the crude oil and the variable exposure conditions along the time. Copyright © 2008 John Wiley & Sons, Ltd.     

Inter‐ and intramolecular hydrogen bonds in polyamines: variable‐concentration 1H‐NMR studies

Inter‐ and intramolecular hydrogen bonding play an important role in determining the arrangement, physical properties, and reactivity of a great diversity of structures in chemical and biological systems. Several aromatic nucleophilic substitutions (ANS) in nonpolar aprotic, (non‐HBD), solvents recently studied in our laboratory have demonstrated the importance of self‐association of amines by hydrogen‐bond interactions. In this paper, we describe ¹H‐NMR studies carried out at room temperature on bi‐ and polyfunctionalized amines, namely: N‐(3‐amino‐1‐propyl)morpholine (3‐APMo), histamine, 2‐guanidinobenzimidazole (2‐GB), 1,2‐diaminoethane (EDA), 3‐dimethylamino‐l‐propylamine (DMPA), and 1‐(2‐aminoethyl)piperidine (2‐AEPip). By ¹H‐NMR measurements of amine solutions at variable concentrations we have shown that 3‐APMo, histamine and 2‐GB are able to form a six‐membered ring by intramolecular hydrogen bonding, while EDA, DMPA, and 2‐AEPip form dimers by intermolecular hydrogen bonds. Likewise, variable concentration ¹H‐NMR studies allowed estimation of the corresponding equilibrium constants for the dimerization. These results are correlated with experimental kinetic results of ANS, confirming hereto the relevance of the “dimer mechanism” in reactions involving these amines. Copyright © 2011 John Wiley & Sons, Ltd.     

Microwave-assisted synthesis of tin sulfide nanoflakes and their electrochemical performance as Li-inserting materials

A novel and quick method has been developed for the preparation of tin sulfide (SnS and SnS₂) nanoflakes in high yield (≈93%) by a microwave irradiation technique for 10–40 min. The sulfides were synthesized in a simple domestic microwave oven (DMO) using stannic chloride and stanous chloride as the precursors of tin and thiourea as the precursor of sulfur in ethylene glycol under argon atmosphere. Elemental sulfur and sodium thiosulfate were also tried as precursors of sulfur. The structures, morphologies, compositions, and physical properties of the products were characterized by powder X-ray diffraction (XRD), differential scanning calorimetry, energy dispersive X-ray analysis, transmission electron microscopy, selected area electron diffraction, Raman spectroscopy, and standard electrochemical techniques. The XRD patterns indicate that the as-synthesized product, obtained after microwave irradiation, is crystalline orthorhombic in the case of the SnS phase and amorphous in the case of SnS₂. Heat treatment of this SnS₂ produced a crystalline hexagonal phase. A possible mechanism for the formation of the tin sulfide nanoflakes is proposed herein. The electrochemical performance of these materials as Li-insertion materials was investigated in a number of electrolyte solutions and was found to be highly sensitive to the solution composition. A stable reversible capacity higher than 600 mAh/g could be obtained with SnS electrodes.     

Representation of Contractive Solutions of a Class of Algebraic Riccati Equations as Characteristic Functions of Maximal Dissipative Operators

Let

Controlling Internal Pore Sizes in Bicontinuous Polymeric Nanospheres

Complex polymeric nanospheres were formed in water from comb‐like amphiphilic block copolymers. Their internal morphology was determined by three‐dimensional cryo‐electron tomographic analysis. Varying the polymer molecular weight (MW) and the hydrophilic block weight content allowed for fine control over the internal structure. Construction of a partial phase diagram allowed us to determine the criteria for the formation of bicontinuous polymer nanosphere (BPN), namely for copolymers with MW of up to 17 kDa and hydrophilic weight fractions of ≤0.25; and varying the organic solvent to water ratio used in their preparation allowed for control over nanosphere diameters from 70 to 460 nm. Significantly, altering the block copolymer hydrophilic–hydrophobic balance enabled control of the internal pore diameter of the BPNs from 10 to 19 nm.     

Biomineralization as an inspiration for materials chemistry

Living organisms are well known for building a wide range of specially designed organic-inorganic hybrid materials such as bone, teeth, and shells, which are highly sophisticated in terms of their adaptation to function. This has inspired physicists, chemists, and materials scientists to mimic such structures and their properties. In this Review we describe how strategies used by nature to build and tune the properties of biominerals have been applied to the synthesis of materials for biomedical, industrial, and technological purposes. Bio-inspired approaches such as molecular templating, supramolecular templating, organized surfaces, and phage display as well as methods to replicate the structure and function of biominerals are discussed. We also show that the application of in situ techniques to study and visualize the bio-inspired materials is of paramount importance to understand, control, and optimize their preparation. Biominerals are synthesized in aqueous media under ambient conditions, and these approaches can lead to materials with a reduced ecological footprint than can traditional methods.     

Effects of acyl donor type, catalyst type, and reaction conditions on the activity and selectivity of Friedel-Crafts acylation

Acylation of anisole and 3-methylanisole was performed with several acylating reagents (acetylation by AcCl and Ac₂O and bromoacetylation by BrAcCl and (BrAc)₂O) over different solid acid catalysts. The reaction conditions were optimized with respect to the acylation reagent, overall yield, solid acid catalyst, and the products selectivities. While acylation of anisole with acetyl chloride or acetic anhydride resulted in its full conversion to para-substituted acetophenone, the use of bromoacetyl bromide or bromoacetic anhydride yielded also the ortho-substituted product. Acylation of 3-methylanisole also yielded both para- and ortho-substitutions, and the products distribution was affected by the reaction conditions and catalyst type. It was found that while more acidic catalysts (caesium salt of heteropolyacid and zeolites) were the most active towards anisole acylation, the most active catalysts for the acylation of 3-methylanisole were ion-exchange catalysts. Employing HY-740 zeolite resulted in the highest ortho-selectivity in the acylation of anisole with bromoacetyl bromide and bromoacetic anhydride and in the acylation of 3-methylanisole with acetic anhydride.