Elementary processes in the radiation-induced degradation of poly(ethylene terephthalate)—A note

Elementary processes of γ-irradiated poly(ethylene terephthalate) (PET) have been investigated by electron spin resonance (esr) and optical absorption measurements. On irradiating PET films with γ-rays at ?196°C and in the dark, they develop a reddish purple color and show esr spectra which are assigned to ionic species of PET. The optical absorption spectra of γ-irradiated PET films at ?196°C and those of a model compound (diethylterephthalate(DET))-2-methyltetrahydrofuran system also confirm these assignments. A possible mechanism for the elementary processes of γ-ray-induced degradation of PET is proposed.     

Glass transition temperature of polyurethane foams derived from lignin by controlled reaction rate

Sodium ligninosulfonate (LS)-based polyurethane (PU) foams were prepared using three kinds of ethylene glycols, diethylene glycol, triethylene glycol or polyethylene glycol. Two kinds of industrial NaLS, acid-based and alkaline-based NaLS, were mixed with various ratios, and foaming reactions were controlled. Mixing, cream, and rise time were used as an index of foaming reaction. Mixing time was defined as the time interval from adding isocyanate to detection of evolved heat under stirring, cream time as the time interval from termination of stirring to starting of foaming, and rise time as the time interval from starting to completion of foaming. The above reaction time increased with increasing amount of acid base NaLS content in polyols. Apparent density, compression strength and compression modulus of PU foams linearly increased with reaction time. Thermal decomposition temperature was measured by thermogravimetry and glass transition temperature by differential scanning calorimetry. Glass transition temperature can be controlled in a temperature range from 310 to 390 K by changing the mixing rate of two kinds of LS and molecular mass of ethylene glycols. It was found that mechanical and thermal properties of PU foams are controllable through the foaming reaction rate using two kinds of industrial lignin.     

Regioselective Alkylation of Thiazolylsulfonamides: Direct and Efficient Synthesis of 3‐Alkylthiazolidene Derivatives

Various N‐3‐alkylated thiazolidenesulfonamide derivatives were efficiently prepared by the direct endo‐selective alkylation of thiazolylsulfonamides. The effects of different bases and solvents were investigated, and the NaH–THF combination was found to be the most effective at conferring high yields and endo‐selectivity.     

A proposal for new surface magnetism studies with a repolarization method

A new spectroscopic method to study surface magnetism is proposed. The method measures the time-evolution of spin polarization due to the magnetic coupling with polarized electron spins of unpolarized and slow radioactive probes. Because of the expectedly high sensitivity and efficiency, a large field of applications will be opened by using slow positive muons,¹²B nuclei, etc.     

Development of New Modifiers for Titanium Alkoxide-Based Sol-Gel Process

The effects of several hydroxyketones such as acetol, actoin, -ketobutanol themselves and their combinations with monoethanolamine (MEA) or ethylenediamine (ED) on the stabilization of titanium tetraisopropoxide (TTIP) in isopropanol solution are examined. Acetoin itself and the imine derivatives of acetol and acetoin were found to show extraordinarily strong stabilizing effect for the alkoxide. The properties including the crystal modifications and refractive index of TiO₂ films that were dip-coated using each stabilized solution are examined and discussed in comparison with those of the films obtained from the diethanolamine (DEA) systems. The effect of UV-light irradiation to the gel films on the crystallization of TiO₂ is also examined and discussed.     

Water‐disintegrative and biodegradable blends containing poly(L‐lactic acid) and poly(butylene adipate‐co‐terephthalate)

In this study, novel biodegradable materials were successfully generated, which have excellent mechanical properties in air during usage and storage, but whose structure easily disintegrates when immersed in water. The materials were prepared by melt blending poly(L ‐lactic acid) (PLLA) and poly(butylene adipate‐co‐terephthalate) (PBAT) with a small amount of oligomeric poly(aspartic acid‐co‐lactide) (PAL) as a degradation accelerator. The degradation behavior of the blends was investigated by immersing the blend films in phosphate‐buffered saline (pH = 7.3) at 40 °C. It was shown that the PAL content and composition significantly affected morphology, mechanical properties, and hydrolysis rate of the blends. It was observed that the blends containing PAL with higher molar ratios of L ‐lactyl [LA]/[Asp] had smaller PBAT domain size, showing better mechanical properties when compared with those containing PAL with lower molar ratios of [LA]/[Asp]. The degradation rates of both PLLA and PBAT components in the ternary blends simultaneously became higher for the blends containing PAL with higher molar ratios of [LA]/[Asp]. It was confirmed that the PLLA component and its decomposed materials efficiently catalyze the hydrolytic degradation of the PBAT component, but by contrast that the PBAT component and its decomposed materials do not catalyze the hydrolytic degradation of the PLLA component in the blends. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010     

Asymmetric total synthesis of rhinacanthin A

Starting from a reduced lapachol compound, the total synthesis of rhinacanthin A in both racemic and enantioenriched forms is achieved in eight steps without forming any undesired β-lapachone derivatives. For the synthesis of enantioenriched rhinacanthin A, the introduction of the asymmetric center was carried out by using the catalytic asymmetric epoxidation of an unfunctional trisubstituted olefin using Shi’s epoxidation diketal catalyst. The acidic treatment of a derived enantioenriched epoxynaphthol and the following CAN oxidation afforded the target molecule with high enantiomeric purity.     

Solvent dependence of the ultrafast ground state recovery dynamics of phenol blue

We have studied femtosecond ground state recovery dynamics of phenol blue (PB) by pump-probe spectroscopy with a time resolution of 33 fs. Multiexponential decay with time constants extending from 300 fs to 10 ps were observed. Some low frequency intramolecular quantum beats were also observed. Solvent dependence of these decays and beats are discussed.     

Synthesis of boradiazaindacene-imidazopyrazinone conjugate as lipophilic and yellow-chemiluminescent chemosensor for superoxide radical anion

As a chemiluminescent chemosensor that emits yellow light on reacting with a superoxide radical anion (O₂⁻) and has a lipophilic character, a 6-phenylimidazo[1,2-a]pyrazin-3(7H)-one derivative possessing a boradiazaindacene (BODIPY) at the para position of 6-phenyl (1) was synthesized. The lipophilicity of 1 was investigated by reversed-phase liquid chromatography, and its log P_ow value was found to be 3.57. This value was much higher than that of 2-methyl-6-(4-methoxypheyl)imidazo[1,2-a]pyrazin-3(7H)-one (MCLA, log P_ow=1.19) and 6-[4-[2-{N′-(5-fluoresceinyl)thioureido}ethoxy]phenyl]-2-methylimidazo[1,2-a]pyrazin-3(7H)-one (FCLA, log P_ow=−0.08), and it was comparable to that of benzenoid hydrocarbons. The O₂⁻-induced chemiluminescence of 1 was investigated using the hypoxanthine/xanthine oxidase system as the source of O₂⁻, and as a result, yellow emission was observed. The maximum wavelength was observed at 542 nm, and it was longer than that of FCLA.