Effect of temporal resolution on the estimation of left ventricular function by cardiac MR imaging

The aim of this study was to investigate the effect of temporal resolution on the estimation of left ventricular (LV) function by cardiac magnetic resonance (MR) imaging using a steady-state free precession (SSFP) sequence. Left ventricular function was assessed by cine MR imaging using a segmented SSFP sequence in 10 healthy volunteers. Views per segment (VPS) were set at 8 and 20, resulting in high and low true temporal resolution, respectively. Irrespective of VPS, images were reconstructed at 40 cardiac phases, providing high apparent temporal resolution. Data were analyzed using 40, 20 and 10 phases to simulate different apparent temporal resolutions. Increasing the cardiac phases used for analysis slightly decreased mean end-systolic volume (ESV) and slightly increased mean ejection fraction (EF). No substantial difference in estimates of end-diastolic volume (EDV) was found between VPSs of 8 and 20. Imaging with a VPS of 20 yielded a larger ESV and smaller EF than imaging with a VPS of 8 when 40 phases were used. In conclusion, low true temporal resolution causes overestimation of ESV and underestimation of EF. Improvement of apparent temporal resolution mildly reduces but does not eliminate the errors caused by low true temporal resolution.     

Microwave EPR spectroscopy of cobalt-doped germanium cuprate

Resonance magnetoabsorption spectra of CuGeO₃ single crystals containing 2% Co impurity have been studied in the frequency range 60–360 GHz in magnetic fields of up to 16 T and in the temperature interval 2–60 K with the magnetic field B aligned parallel to the a crystallographic axis. In addition to the Cu²⁺ chain resonance, a new absorption line (unobserved previously in doped CuGeO₃ and deriving apparently from the Co²⁺ ions) was detected in EPR spectra. Quantitative analysis of the spectra suggests that the spin-Peierls transition occurs in about 10% Cu²⁺ chains, while the spin-Peierls state in the remaining 90% chains is completely destroyed by cobalt doping. The results obtained reveal considerable deviations from the universally accepted scenario of CuGeO₃ doping and are discussed within alternative theoretical models, namely, the quantum critical behavior (based on the EPR theory for quasi-one-dimensional systems) and a three-dimensional antiferromagnet with the Néel temperature lowered by disorder.     

Development of New Modifiers for Titanium Alkoxide-Based Sol-Gel Process

The effects of several hydroxyketones such as acetol, actoin, -ketobutanol themselves and their combinations with monoethanolamine (MEA) or ethylenediamine (ED) on the stabilization of titanium tetraisopropoxide (TTIP) in isopropanol solution are examined. Acetoin itself and the imine derivatives of acetol and acetoin were found to show extraordinarily strong stabilizing effect for the alkoxide. The properties including the crystal modifications and refractive index of TiO₂ films that were dip-coated using each stabilized solution are examined and discussed in comparison with those of the films obtained from the diethanolamine (DEA) systems. The effect of UV-light irradiation to the gel films on the crystallization of TiO₂ is also examined and discussed.     

Submillimeter-wave ESR measurements of Ca1−xCuO2 (x = 0.164) with edge-sharing CuO2 chains

Quasi-one-dimensional (1-D) cupric oxide Ca_1?xCuO₂ (x = 0.164) is the system with 25–40% hole-doped edge-sharing CuO₂ chains. However, the holes are almost localized in Ca_1?xCuO₂ and its magnetic susceptibility with a peak at 30 K was explained by the model considering both 1-D antiferromagnetic chains and spin dimers (Z. Hiroi, M. Okumura, Y. Nabeshima, T. Yamada, M. Takano: J. Phys. Soc. Jpn.69, 1824, 2000). To clarify the magnetic nature of Ca_1?xCuO₂, we performed submillimeter-wave electron spin resonance (ESR) measurements on a powder sample of Ca_0.83?6CuO₂. The resonance above 12 K showed typical powder ESR of Cu²⁺ and theg-values were determined to be g∥= 2.33 and g_⊥ = 2.06 from the analysis. The resonance below 12 K changed completely from ESR. The frequency-field relation of ESR at 1.8 K clearly showed the easy-axis type antiferromagnetic resonance.     

Water‐disintegrative and biodegradable blends containing poly(L‐lactic acid) and poly(butylene adipate‐co‐terephthalate)

In this study, novel biodegradable materials were successfully generated, which have excellent mechanical properties in air during usage and storage, but whose structure easily disintegrates when immersed in water. The materials were prepared by melt blending poly(L ‐lactic acid) (PLLA) and poly(butylene adipate‐co‐terephthalate) (PBAT) with a small amount of oligomeric poly(aspartic acid‐co‐lactide) (PAL) as a degradation accelerator. The degradation behavior of the blends was investigated by immersing the blend films in phosphate‐buffered saline (pH = 7.3) at 40 °C. It was shown that the PAL content and composition significantly affected morphology, mechanical properties, and hydrolysis rate of the blends. It was observed that the blends containing PAL with higher molar ratios of L ‐lactyl [LA]/[Asp] had smaller PBAT domain size, showing better mechanical properties when compared with those containing PAL with lower molar ratios of [LA]/[Asp]. The degradation rates of both PLLA and PBAT components in the ternary blends simultaneously became higher for the blends containing PAL with higher molar ratios of [LA]/[Asp]. It was confirmed that the PLLA component and its decomposed materials efficiently catalyze the hydrolytic degradation of the PBAT component, but by contrast that the PBAT component and its decomposed materials do not catalyze the hydrolytic degradation of the PLLA component in the blends. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010     

Production of core/shell polystyrene/poly(3,5-xylidine) composite particles by chemical oxidative seeded dispersion polymerization

Micron-sized monodispersed polystyrene (PS)/poly(3,5-xylidine) (PXy) composite particles were produced by chemical oxidative seeded dispersion polymerization of 3,5-xylidine at 20 °C with 1.6-μm-sized monodispersed PS seed particles in HCl aqueous solution, the pH of which was always kept at 2.5 with a pH stat. The composite particles produced consisted of a PS core and a PXy shell. Received: 16 December 1998 Accepted in revised form: 25 March 1999     

Asymmetric total synthesis of rhinacanthin A

Starting from a reduced lapachol compound, the total synthesis of rhinacanthin A in both racemic and enantioenriched forms is achieved in eight steps without forming any undesired β-lapachone derivatives. For the synthesis of enantioenriched rhinacanthin A, the introduction of the asymmetric center was carried out by using the catalytic asymmetric epoxidation of an unfunctional trisubstituted olefin using Shi’s epoxidation diketal catalyst. The acidic treatment of a derived enantioenriched epoxynaphthol and the following CAN oxidation afforded the target molecule with high enantiomeric purity.