Mesoporous Rh Emerging from Nanophase‐separated Rh‐Y Alloy

Mesoporous precious metals with abundant active sites and high surface area have been widely recognized as high‐performance catalytic materials. However, the templated synthesis is complex and costly. Herein, we report a mesoporous rhodium (m‐Rh) that can be readily synthesized from entangled nanofibres of Rh and Y₂O₃ without templates. The entangled nanofibres, prepared from uniform Rh‐Y alloys under redox atmosphere, were the key precursor in the synthesis processes. Moreover, the m‐Rh efficiently catalyzed carbon dioxide reforming of methane (DRM) at a low reaction temperature of 683 K. Further, electrochemical methods of CO electro‐oxidation were innovatively used to demonstrate the stability of CO and oxygen species for the DRM reaction.     

Formation of CdS x Se1−x microcrystals in sol-gel derived glasses

Sol-gel method was applied to prepare CdS _x Se_1–x microcrystals doped glasses. Gels were synthesized through the hydrolysis of Si(OC₂H₅)₄, CdSeO₄, and NH₄SCN, and then heated in H₂-N₂ gas atmosphere to precipitate CdS _x Se_1–x microcrystals in the glasses. The composition of crystals was preliminarily determined during the synthesis of the gels. The optical band gap energies were blue shifted compared with those of the bulk crystals due to the quantum-sized confinement effect.     

Kinetic and DFT studies on the Ag/TiO2-photocatalyzed selective reduction of nitrobenzene to aniline.

TiO2 particles loaded with silver nanoparticles with a mean diameter of 1.5 nm exhibit a high photocatalytic activity (84 % conversion after 1 h irradiation) for the reduction of nitrobenzene to aniline with 100 % selectivity in the presence of CH3OH (concentration=100 mM). High-resolution transmission electron microscopic studies of Pt-photodeposited Ag/TiO2 demonstrate that the Ag nanoparticles act as reduction sites in the photocatalytic reaction. Both spectroscopic measurements and density functional theory (DFT) calculations reveal that nitrobenzene is selectively adsorbed onto the Ag surfaces of Ag/TiO2 via partial electron transfer from Ag to nitrobenzene, whereas the interaction between aniline and Ag/TiO2 is weak. The kinetic analysis indicates that the recombination between the electrons flowing into the Ag nanoparticle and the holes left in the TiO2 valence band is significantly suppressed, particularly in the presence of CH3OH. The high activity and selectivity in the present Ag/TiO2-photocatalyzed reduction are rationalized in terms of the charge separation efficiency, the selective adsorption of the reactants on the catalyst surfaces, and the restriction of the product readsorption.     

Photoresponsive peptide and polypeptide systems. VIII. Synthesis and reversible photochromism of azo aromatic poly(L-ornithine)

Poly(L -ornithine) having azo aromatic side chain was synthesized by the water-soluble carbodiimide procedure. The photochemical properties of the azo polypeptide poly[N^δ-p-(phenylazo)benzoyl-L -ornithine] (PPABLO) was investigated by absorption and circular dichroism spectroscopy in hexafluoro-2-propanol (HFIP). The photochromism of the dichroic bands in the visible and ultraviolet wavelength regions was found to be reversible as a function of irradiation time at different wavelengths due to the photostationary state (about 70% trans)–cis photoisomerization of the azo aromatic moieties. The reversible photoinduced solubility change was also studied. On irradiation PPABLO is soluble under ultraviolet light (cis) and precipitate under visible light (70% trans) in HFIP–water. A discussion was presented that includes results on azo aromatic poly(L -lysine).     

A new triterpenoid isolated from Lagerstronemia speciosa (L.) Pers

A new triterpenoid along with four known compounds were isolated from the leaves of Lagerstronemia speciosa (L.) PERS. (Lythraceae). On the basis of chemical and spectroscopic evidence, the new compound was established as 3beta,23-dihydroxy-1-oxo-olean-12-en-28-oic acid.     

Computational chemical analysis of the retention of acidic drugs on a pentyl-bonded silica gel in reversed-phase liquid chromatography

A fast method to obtain a quantitative structure-retention relationship is required in chromatography for the rapid optimization of chromatographic separation conditions. Chromatographic data of acidic drugs are analyzed by a computational chemical method to simulate chromatographic simulation. The direct interaction between a model phase and a drug is calculated as an energy value using the molecular mechanics calculation of CAChe. Computational chemistry using a model adsorbent is a new method for quantitative analysis of retention in reversed-phase liquid chromatography. The correlation coefficient is 0.878 (n = 19) between the retention factors of acidic drugs and interaction energy values of the final structure (DeltaFS) between an acidic drug and model pentyl-bonded phase.     

Bis[2-(5-bromo-2-pyridylazo)-5-(N-propyl-N-sulpho propylamino)phenolato]cobaltate(III) as a counter ion for the extraction and spectrophotometric determination of long-chain quaternary ammonium salts and tertiary alkylamines in the presence of each other

The singly charged complex anion bis[2-(5-bromo-2-pyridylazo)-5-(N-propyl-N-sulphopropylamino)phenolato]cobaltate(III) is intensely purple-violet and is stable over the pH range 1–13. Its absorption spectrum remains the same over this pH range. At pH2, it forms extractable ion pairs with long-chain quaternary ammonium ions and protonated alkylamines. Only the quaternary ammonium ions are extracted into chloroform at pH 11, hence separate extractions allow both types to be determined. The absorbance of the organic phase is measured at 594 nm. The apparent molar absorptivity is 7.0 × 10⁴ l mol^?1 cm^?1. Calibration graphs for zephiramine, benzethonium and hexadecylpyridinium ions are linear over the range 0.1–2 × 10^?6 M. The only interference found was from anionic surfactants. The method is applied to hair and fabric conditioners.     

Synthesis of enzymatically crosslinkable peptide-poly(L-lysine) conjugate and creation of bio-inspired hybrid fibers

Poly(L-lysine)s having an Nepsilon-substituted tetrapeptide, Lys-Gly-Tyr-Gly, were synthesized by the coupling of the protected tetrapeptide active ester, Boc-Lys(Z)-Gly-Tyr(Bzl)-Gly (4-hydroxyphenyl)dimethylsulfonium methylsulfate and Nepsilon-group of the poly(L-lysine) side chain. The Nepsilon-substituted tetrapeptide functions as the substrate of tyrosinase and is responsible for the enzyme-mediated interpolymer cross-linking. The degree of Nepsilon-substitution (DS) was mostly controlled by changing the stoichiometry between the Nepsilon-amino groups of the parent poly(L-lysine) and the protected tetrapeptide active ester. Two kinds of samples having DS values of 8.6 and 18 mol-% were prepared. The resulting cationic Nepsilon-(Lys-Gly-Tyr-Gly)-poly(L-lysine) (abbreviated as PLL(GYGK)) was spun into hybrid fibers with the anionic polysaccharide gellan via a polyionic complexation reaction at the interface between aqueous solutions of the two polymers. The mechanical strengths of the PLL(GYGK)-gellan hybrid fibers were superior to those of the original poly(L-lysine)-gellan fibers. The mechanical strength of the hybrid fibers further increased upon the tyrosinase-mediated cross-linking reaction of the PLL(GYGK). This result indicates that the covalent cross-bridge formation between the Nepsilon-substituted peptides significantly contributed to reinforcement of the hybrid fibers. The present study affords a new methodology for reinforcement inspired by a biological process.     

Synthesis, characterization, and catalytic reactivity of a highly basic macrotricyclic aminopyridine

The synthesis methods, physicochemical and structural characteristics, and catalytic reactivity of new macrocyclic proton chelators, N,N',N'-tris(p-tolyl)azacalix[3](2,6)(4-pyrrolidinopyridine) and N,N',N'-tris(p-tolyl)azacalix[3](2,6)(4-piperidinopyridine), are studied. The introduction of pyrrolidino and piperidino groups into the pyridine unit enables the enhancement of the synergistic proton affinity of the cavity of the macrotricycle giving a high basicity (pK(BH+) = 28.1 and 27.1 in CD(3)CN), resulting in a catalytic activity for the Michael addition of nitromethane with α,β-unsaturated carbonyl compounds.     

Method and mechanism of vapor phase treatment–total reflection X-ray fluorescence for trace element analysis on silicon wafer surface

Vapor phase treatment (VPT) is a pretreatment with hydrofluoric acid vapor to raise the sensitivity of total reflection X-ray fluorescence spectroscopy (TXRF) for trace metal analysis on silicon wafers. The International Organization for Standardization/Technical Committee 201/Working Group 2 (ISO/TC201/WG2) has been investigating the method to analyze 10⁹ atoms/cm² level of metallic contamination on the silicon wafer surface. Though VPT can enhance the TXRF signal intensity from the metallic contamination, it has turned out that the magnitude of the enhancement varies with the type of methods and the process conditions. In this study, approaches to increase TXRF intensity by VPT are investigated using a fuming chamber in an automated VPD instrument. Higher signal intensity can be obtained when condensation is formed on the sample surface in a humidifying atmosphere and with a decreasing stage temperature. Surface observations with SEM and AFM show that particles with ~ 4 μm in diameter are formed and unexpectedly they are dented from the top surface level.