Glass transition temperature of polyurethane foams derived from lignin by controlled reaction rate

Sodium ligninosulfonate (LS)-based polyurethane (PU) foams were prepared using three kinds of ethylene glycols, diethylene glycol, triethylene glycol or polyethylene glycol. Two kinds of industrial NaLS, acid-based and alkaline-based NaLS, were mixed with various ratios, and foaming reactions were controlled. Mixing, cream, and rise time were used as an index of foaming reaction. Mixing time was defined as the time interval from adding isocyanate to detection of evolved heat under stirring, cream time as the time interval from termination of stirring to starting of foaming, and rise time as the time interval from starting to completion of foaming. The above reaction time increased with increasing amount of acid base NaLS content in polyols. Apparent density, compression strength and compression modulus of PU foams linearly increased with reaction time. Thermal decomposition temperature was measured by thermogravimetry and glass transition temperature by differential scanning calorimetry. Glass transition temperature can be controlled in a temperature range from 310 to 390 K by changing the mixing rate of two kinds of LS and molecular mass of ethylene glycols. It was found that mechanical and thermal properties of PU foams are controllable through the foaming reaction rate using two kinds of industrial lignin.     

Regioselective Alkylation of Thiazolylsulfonamides: Direct and Efficient Synthesis of 3‐Alkylthiazolidene Derivatives

Various N‐3‐alkylated thiazolidenesulfonamide derivatives were efficiently prepared by the direct endo‐selective alkylation of thiazolylsulfonamides. The effects of different bases and solvents were investigated, and the NaH–THF combination was found to be the most effective at conferring high yields and endo‐selectivity.     

Thermal oxidative degradation of additive-free polypropylene pellets investigated by multichannel Fourier-transform chemiluminescence spectroscopy

Thermal oxidative degradation of additive-free polypropylene pellets heated isothermally in dry air at 150 and 180 °C (below and above the melting point of 163 °C) was investigated by multichannel Fourier-transform chemiluminescence spectroscopy. The initial peak wavelength of chemiluminescence emission at 490 nm remained constant during the early stages of thermal degradation, but new emissions developed with time in the red spectral region over an extended oxidation period. The time-dependent luminescence spectra were deconvoluted into three emission bands by least-squares fitting using Gaussian curves. We concluded that at least three groups of luminescent species (luminophores), having different conjugation lengths, were generated by thermal oxidation over extended periods and show luminescence around 490, 660, and 740 nm.     

Diversity oriented synthesis of conjugate dienes and alkenylcyclopropanes utilizing silyl group-substituted titanium carbene complexes as bimetallic synthetic reagents

Diversity oriented synthesis of conjugate dienes and alkenylcyclopropanes by the sequential reactions using silyl group-substituted titanium carbene complexes was studied. Dienylsilanes were obtained by the olefination of carbonyl compounds with γ-silylvinylcarbene complexes. Cyclopropanation of 1-alkenes with the vinylcarbene complexes produced (E)-(β-silylvinyl)cyclopropanes with high stereoselectivity. The reaction of β-(trialkylsilyl)carbene complexes with zinc alkoxides of homopropargyl alcohols produced 6-silyl-3,5-hexadien-1-ols with high regio- and stereoselectivity. The (E)-alkenylsilanes thus obtained were transformed into a range of unsaturated compounds by the palladium-catalyzed or copper(I)-promoted cross-coupling with organic halides with retention of configuration.     

Chemical and genetic diversity of Ligularia virgaurea collected in northern Sichuan and adjacent areas of China. Isolation of 13 new compounds

Root chemicals and DNA sequences were analyzed for Ligularia virgaurea collected in the northern Sichuan Province and adjacent areas of China. Thirty-eight samples were found to contain five chemotypes, two known and three new ones. From samples of the new chemotypes, 13 new compounds were isolated, including 3 sesquiterpene dimers and some rearranged eremophilanes. The DNA sequences suggested that the chemotype differentiation had a genetic origin.     

Development of New Modifiers for Titanium Alkoxide-Based Sol-Gel Process

The effects of several hydroxyketones such as acetol, actoin, -ketobutanol themselves and their combinations with monoethanolamine (MEA) or ethylenediamine (ED) on the stabilization of titanium tetraisopropoxide (TTIP) in isopropanol solution are examined. Acetoin itself and the imine derivatives of acetol and acetoin were found to show extraordinarily strong stabilizing effect for the alkoxide. The properties including the crystal modifications and refractive index of TiO₂ films that were dip-coated using each stabilized solution are examined and discussed in comparison with those of the films obtained from the diethanolamine (DEA) systems. The effect of UV-light irradiation to the gel films on the crystallization of TiO₂ is also examined and discussed.     

Study for noise reduction in synchrotron radiation based scanning tunneling microscopy by developing insulator-coat tip

To solve difficulties of instability and inaccuracy in synchrotron radiation based scanning tunneling microscopy, a method to reduce noise was investigated. New insulator-coat tips were developed to shut out electrons coming from a wide area that damage the spatial resolution. By changing the exposed conductive area at the end of the insulator-coat tips, the effect of noise reduction was estimated. The tip with an exposure area of 50 nm in diameter was found to reduce noise effectively. Also a key discriminating condition was found to obtain the local signal, which is based on the modulation of the X-ray-induced tip current caused by excitation of the specific element.     

Water‐disintegrative and biodegradable blends containing poly(L‐lactic acid) and poly(butylene adipate‐co‐terephthalate)

In this study, novel biodegradable materials were successfully generated, which have excellent mechanical properties in air during usage and storage, but whose structure easily disintegrates when immersed in water. The materials were prepared by melt blending poly(L ‐lactic acid) (PLLA) and poly(butylene adipate‐co‐terephthalate) (PBAT) with a small amount of oligomeric poly(aspartic acid‐co‐lactide) (PAL) as a degradation accelerator. The degradation behavior of the blends was investigated by immersing the blend films in phosphate‐buffered saline (pH = 7.3) at 40 °C. It was shown that the PAL content and composition significantly affected morphology, mechanical properties, and hydrolysis rate of the blends. It was observed that the blends containing PAL with higher molar ratios of L ‐lactyl [LA]/[Asp] had smaller PBAT domain size, showing better mechanical properties when compared with those containing PAL with lower molar ratios of [LA]/[Asp]. The degradation rates of both PLLA and PBAT components in the ternary blends simultaneously became higher for the blends containing PAL with higher molar ratios of [LA]/[Asp]. It was confirmed that the PLLA component and its decomposed materials efficiently catalyze the hydrolytic degradation of the PBAT component, but by contrast that the PBAT component and its decomposed materials do not catalyze the hydrolytic degradation of the PLLA component in the blends. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010