Photoconductive novel mesomorphic oxotitanium phthalocyanines

The synthesis and photoconductivity properties of the alkylthia and triethyleneoxysulfonyl substituted oxotitanium(IV) phthalocyanines (1a and 2a) are reported for the first time. The new compounds have been characterized by elemental analysis, IR, ¹H and ¹³C NMR spectroscopy, electronic spectroscopy and mass spectroscopy. The mesogenic properties of these new materials were studied by differential scanning calorimetry and optical microscopy. The electrical dark conductivities (σ_d) and photoconductivities (σ_ph) of deposited films of 1a and 2a were investigated in various media with different concentrations of oxygen. Molecular oxygen increases photoconductivities (σ_ph) significantly. The photoconductivity mechanism and formation of Pc⁺ which is positive charge carrier under the light irradiation of the phthalocyanine molecules are demonstrated using the theoretical calculations. The geometries of the oxotitanium(IV) phthalocyanines (TiOPc) are optimized with PM3 semi-empirical method, and their visible absorption maxima are calculated with ZINDO/S method. The results agree well with the observed values. It was found that for the calculation of visible absorption of neutral and positively charged substituted TiOPc molecules using ZINDO/S method could rapidly yield excellent results. Dipole moment, HOMO, LUMO energies and atomic charges are also calculated for clarification of the oxygen effect on the photoconductivity using PM3 and ZINDO/S methods.     

Synthesis, characterization, adsorption, and interfacial rheological properties of four-arm anionic fluorosurfactants

Four-arm oligo(fluorooxetane) tetraols containing -CF3 and -C2F5 groups were prepared in reasonable yields by cationic, ring-opening polymerization of fluorinated oxetane monomers using a tetrafunctional, alkoxylated polyol as initiator and BF3.THF as catalyst. The tetraols were then converted to ammonium sulfate salts using oleum followed by neutralization with ammonium hydroxide in excellent yields. The four-arm oligo(fluorooxetane) sulfates (1=-CF3, 2=-C2F5) have an architecture characterized by a hydrophobic core of oligo(fluorooxetane) arms with a hydrophilic sulfate shell and initiator. The four-arm anionic oligo(fluorooxetane)s are surface active with critical micelle concentration values approximately 4.2x10(-6) and 2.4x10(-6) mol/L for 1 and 2, respectively. Surface tension isotherms in pH 8 buffered solution were measured and data fitted parametrically to the Davies surface tension isotherm equation. Molecular areas at saturation were estimated to be approximately 89 and approximately 85 A2 with DeltaGads=-12.7 and -13.2 kcal/mol for 1 and 2, respectively. The results are compared to two-arm, bolaamphiphilic analogues of 1 and 2 and a small molecule, long perfluoroalkyl-chain (-C8F17), anionic fluorosurfactant (Kausch, C. M.; Kim, Y.; Russell, V. M.; Medsker, R. E.; Thomas, R. R. Langmuir 2003, 19, 7182). Dynamic surface tension data for 1 and 2 were analyzed using the Ward-Tordai mass transport equation to yield concentration-dependent diffusion coefficients. In the concentration range approximately 10(-6) mol/L, diffusion coefficients were estimated to be approximately 1-3x10(-5) cm2/s. Dilational interfacial rheological parameters for 1 and 2 were measured. Values of |E| and E' were found to be larger than those of the two-arm analogues of the same perfluoroalkyl chain length while E' 'and phi were found to be smaller. The magnitude of these values reflects the difference in adsorption strength and mass transport and/or relaxation between the two different architectures.     

Tricetin 4′-<Emphasis Type="Italic">O-α</Emphasis>-L-rhamnopyranoside: A new flavonoid from the aerial parts of <Emphasis Type="Italic">Erica arborea</Emphasis>

Reversed-phase preparative HPLC purification of the methanol (MeOH) extract of the aerial parts of Erica arborea resulted in the isolation of a new flavonoid glycoside, tricetin 4′-O-α-L-rhamnopyranoside, together with the known flavonoid, isorhamnetin 3-O-α-L-rhamnopyranoside. The structures of these compounds were determined by spectroscopic means. The antioxidant properties of these compounds were assessed by the DPPH assay. Published in Khimiya Prirodnykh Soedinenii, No. 2, pp. 138–140, March–April, 2008.     

Voronovskaya Type Theorems in Weighted Spaces

In this article, we introduce a generalization of Gamma operators based on a function ρ having some properties and prove quantitative Voronovskaya and quantitative Grüss type Voronovskaya theorems via weighted modulus of continuity.     

Characterization of Floc Structure Using Cluster Analysis

This work is based on a numerical classification method (Forgy's method or c-means clustering) to investigate floc structure, taking into account a physically well-founded model. Two different kinds of morphologies, voluminous, irregularly shaped, fluffy flocs and dense, regularly shaped, compact, pellet-like aggregates, are analyzed. These structures are embedded in glycol methacrylate and cut into thin sections by means of a motorized microtome. Scanning electron microscopic observations show that no serious damage to the aggregate structure due to the preparation technique is apparent. A sequence of image analysis steps reduces the total image information of the sections, taken by a light microscope, to a few pertinent measurements, applicable to cluster analysis. Thus a cluster-cluster aggregation mechanism is confirmed experimentally. The floc structure is separated into two clusters. Cluster 1 consists of six microflocs and cluster 2 is made up of two sub-units, which are again subdivided into six and three microflocs. The pellet-like aggregate is assembled from ten particles. Further interpretation of aggregate growth history remains unconsidered owing to the expected errors. In a second paper more aspects concerning cluster analysis of flocs will be published.     

A novel method for serum lipoprotein profiling using high performance capillary isotachophoresis

A new capillary isotachophoresis (cITP) method for lipoprotein profiling with superior lipoprotein coverage compared to previous methods has been developed, resolving twice as many lipoprotein species (18 peaks/fractions) in serum or plasma in less than 9.5 min. For this, a novel mixture of 24 spacers, including amino acids, dipeptides and sulfonic acids, was developed and fine-tuned, using predictive software (PeakMaster) and testing of spiked serum samples. Lipoprotein peaks were identified by serum-spiking with reference lipoproteins. Compatibility with common lipophilic stains for selective lipoprotein detection with either UV/Vis or laser-induced fluorescence was demonstrated. A special new capillary with a neutral coating (combining water-compatible OV1701-OH deactivation and methylation) was used for the first time for electrodriven separations, allowing very stable separations in a pH 8.8–9.4 gradient system, being functional for more than 100 injections. Excellent reproducibility was achieved, with coefficients of variation lower than 2.6% for absolute migration times. Comparison was performed with human plasma samples analyzed by NMR, leading to similar results with cITP after multivariate statistics, regarding group-clustering and lipoprotein species correlation. The new cITP method was applied to the analysis of serum samples from a LDL receptor knock-out mice model fed either a normal diet or a western-type diet. Differences in the lipoprotein levels and in the sublipoprotein types were detected, showing a shift to more atherogenic particles due to the high cholesterol diet. In summary, this novel method will allow more detailed and informative profiling of lipoprotein particle subtypes for cardiovascular disease research.     

Investigations of flow field designs in direct methanol fuel cell

An experimental and simulation research had been performed to investigate the performance as well as the flow distribution in the cathode flow field in the case of direct methanol fuel cells (DMFCs). The gas was well distributed in serpentine flow field, whereas stagnation of the gas was observed in parallel flow field. These would contribute to the cell performance greatly due to mass transfer effect when the cells start operating. In addition, the durability test of DMFC was drastically affected in parallel flow field due to poor ability to drain flooded water produced electrochemically at cathode and crossover from anode. In addition, pressure drops of different flow fields were also investigated to evaluate their contribution and feasibility as an economic application for DMFC. DMFC with serpentine flow field featuring higher pressure difference resulted in a larger parasitic energy demand. However, the optimal flow field designs are needed to balance the performance and pressure loss to achieve a uniform fluid distribution and simultaneously minimize energy demand for mass transport. Consequently, flow field with grid pattern appears to be the optimal design for the DMFC cathode.     

Almost lacunary statistical and strongly almost lacunary convergence of sequences of fuzzy numbers

The purpose of this paper is to introduce the concepts of almost lacunary statistical convergence and strongly almost lacunary convergence of sequences of fuzzy numbers. We give some relations related to these concepts. We establish some connections between strongly almost lacunary convergence and almost lacunary statistical convergence of sequences of fuzzy numbers. It is also shown that if a sequence of fuzzy numbers is strongly almost lacunary convergent with respect to an Orlicz function then it is almost lacunary statistical convergent.