Magnesium substitution in Nd0.7Sr0.3MnO3

Magnesium substitution in Nd_0.7Sr_0.3MnO₃ has been studied by neutron powder diffraction. Polycrystalline samples of nominal compositions Nd_0.7Sr_0.3Mn_1−yMg_yO₃ with y=0.0, 0.1, 0.2 and 0.3 were synthesized by the standard solid-state reaction method. Rietveld refinements of the neutron powder diffraction data showed that all samples had distorted perovskite structure of orthorhombic symmetry. Mg initially preferred to substitute for Nd and only at Mg concentration greater than 0.1, a substantial substitution for Mn occurred. Our study also showed that Mg-substitution did not change the crystal structure of Nd_0.7Sr_0.3MnO₃.     

Structure of starch-bentonite gels

Mixed gels of starch and bentonite are investigated in the interval 0.056–0.089 of total solids/water ratio and 0-100% starch in the solids. The bentonite was a sodium calcium bentonite with a Na/Ca ratio of 1.76. In water it forms gels consisting of a network of band-type structures. Starch forms gels through hydrogen bonds between granules and/or amylose and amylopectin present on the external surfaces of granules and/or in fully stretched form. Mixed gels of bentonite and starch were obtained by adding corn starch granules to the already formed bentonite gels and heating the mixture above the Kofler gelatinization temperature. Amylose and amylopectin were adsorbed on strands of band-type structures of mont-morillonite lamellae. Starch gellation, e.g. diffusion of amylose out of the granule, was facilitated in the presence of bentonite. On the other hand, the presence of starch favored delamination of the montmorillonite particle into thinner lamellae. Maximum gelatinization and polymer adsorption were observed for gels with 20% starch and 80% bentonite. Montmorillonite networks formed the continuous phase for 0-80% starch. At higher starch concentrations, montmorillonite flakes were dispersed within the polymer network. Increase in the water content of the gels caused segregation of the bentonite and starch.     

The effect of engineered disulfide bonds on the stability of Drosophila melanogaster acetylcholinesterase

Background  

Acetylcholinesterase is irreversibly inhibited by organophosphate and carbamate insecticides allowing its use in biosensors for detection of these insecticides. Drosophila acetylcholinesterase is the most sensitive enzyme known and has been improved by in vitro mutagenesis. However, its stability has to be improved for extensive utilization.     

S-(2-Pyrimidinyl)- and S-(2-(4,6-dimethylpyrimidinyl))-1,1,3,3-tetramethylthiouronium hexafluorophosphates: novel reagents for in situ peptide coupling

Two new reagents for in situ peptide coupling based on the 2-mercaptopyrimidine core have been developed. The readily prepared thiouronium salts were found to promote both peptide and segment coupling efficiently with low racemization/epimerization levels.     

A Large Volume Injection Procedure for GC-MS Determination of PAHs and PCBs

A simple on-column injection system for large volume of liquid samples for the GC-MS determination of traces of PAHs and PCBs has been investigated. A deactivated fused silica capillary 20 m × 0.53 mm I.D. and 2 meters of an HP5 column (0.53 mm,1 m film thickness) were used as retention gaps. Injection volumes of 80 L for PAHs and 90 L for PCBs, allow determination of 5–50 ng L^–1 PAHs and 11–44 ng L^–1 PCBs in hexane solution with an RSD of < 10%. The method has been used for the determination of PCBs and PAHs in soil sample.     

Antiferromagnetism of poly(3-dodecylthiophene) irradiated by γ-beams

The magnetic properties of poly(3-dodecyl-thiophene) (PDDT) irradiated by -beams have been studied by measuring the magnetic susceptibility and EPR spectra. The irradiated PDDT is characterized, similarly as the non-irradiated one, by an antiferromagnetic course of magnetic susceptibility with a Néel temperature of 237 K. It is suggested that the antiferromagnetic properties of PDDT are caused by transformation of polarons to bipolarons, which takes place at lower temperatures.     

The first bis(orotato–N,O) complex: Synthesis,crystal structure,spectroscopic and thermal characterization of (chaH)2[Cu(HOr–N,O)2(cha)] · 2H2O (cha = cyclohexylamine and HOr = orotate(2−))

The novel bis(cyclohexylaminium) cyclohexylaminebis(orotate–N,O)cuprate(II) dihydrate, (C₆H₁₅N)₂[Cu(C₅H₂N₂O₄)₂(C₆H₁₄N)] · 2H₂O, has been prepared and characterized by elemental analysis, magnetic measurements, FT-IR and UV–Vis spectroscopy, thermal analysis and X-ray diffraction. The Cu(II) complex crystallizes in the monoclinic space group P2₁/c. The copper atom in the five-coordinated (chaH)₂[Cu(HOr–N,O)₂(cha)] · 2H₂O is chelated by a deprotonated pyrimidine nitrogen atom and carboxylate oxygen atom as a bis(bidentate) ligand and the cyclohexylamine ligand completes the square-pyramidal coordination. The thermal decomposition of the complex has been predicted by the help of thermal analysis (TG, DTG and DTA).     

A survey of 222Rn concentrations in dwellings of Turkey

As part of a national program to determine public exposure to natural radiation, indoor air ²²²Rn concentrations were determined in dwellings of Turkey. The ²²²Rn concentrations were measured with time-integrating passive nuclear etched track detectors in 27 provincial centers. The indoor radon concentrations were found to be in the range of 10-380 Bq^.m^-3. This revised version was published online in August 2006 with corrections to the Cover Date.     

Continuous chemiluminescence determination of formaldehyde in air based on Trautz-Schorigin reaction

A new continuous method for the determination of formaldehyde in air is described. A cylindrical wet effluent diffusion denuder is used for the collection of formaldehyde from air into a thin film of absorption liquid (distilled-deionized water). Formaldehyde in the denuder concentrate is on-line detected employing a chemiluminescence flow method based on a reaction of formaldehyde and gallic acid with hydrogen peroxide in an alkaline solution. The collection efficiency of formaldehyde is quantitative at the air flow rate of 0.5 L min⁻¹ (absorption liquid flow rate of 336 μL min⁻¹). The limit of detection (S/N = 3) is 0.60 μg m⁻³ HCHO (0.49 ppb). The calibration graph is linear up to 300 μg m⁻³ HCHO (244 ppb). The relative standard deviations of chemiluminescence method for 1 × 10⁻⁶ and 5 × 10⁻⁶ M HCHO are 2.87% and 1.49%, respectively. Acetaldehyde interferes negligible, other compounds do not interfere. The method was employed for formaldehyde measurement in ambient air. The comparison measurement illustrates the good agreement of results obtained by proposed method with those obtained by reference fluorimetric method.     

Ab initio crystal orbital studies on linear chains of H atoms

Anab initio crystal orbital method is used to calculate the energies of an infinite chain of H atoms and of linear arrangements of H₂ molecules with different interatomic distances. The H₂ arrangements are not stable in respect to isolated molecules. The cohesive energy of an optimized arrangement of H atoms chain is 0.0354 a.u.