Investigation of spectroscopic studies and DFT calculations on glucofuranose derivatives of dithiophosphonates

Abstract

2,4-Bis(4-methoxyphenyl)-1,3,2,4-dithiadiphosphetane-2,4-disulfide (Lawesson’s reagent: LR) was reacted with 1,2:5,6-di-O-cyclohexylidene-α-D-glucofuranose and 1,2:5,6-di-O-isopropylidene-α-D-glucofuranose in toluene and gave rise to crude dithiophosphonic acids. The crude dithiophosphonic acids were treated with excess triethylamine and the triethylammonium salts of dithiophosphonic acids (1) and (2) were isolated by crystallization method. Compounds 1 and 2 were characterized by elemental analysis, IR, and NMR (¹H-, ¹³C- and ³¹P-) spectroscopies and mass spectrometry. In addition, NMR spectra, the electronic properties (the electronic chemical potential, electronegativity, chemical hardness and the global electrophilicity index) and NBO analysis of compound 2 have been calculated by using the Gaussian 16?W program. The electronic properties were calculated using Highest Occupied Molecular Orbital (HOMO) and Lowest Unoccupied Molecular Orbital (LUMO) energies by density functional method (DFT/B3LYP) at 6-31G(d,p) level. The HOMO and LUMO energies are ?5.9 and ?0.72?eV, respectively. The HOMO–LUMO energy difference is 5.18?eV and this value shows that compound 2 has a high stability and low reactivity.     

Microbial Screening of Copolymers of N‐Vinylimidazole with Phenacyl Methacrylate: Synthesis and Monomer Reactivity Ratios

N‐vinylimidazole (VIM), and phenacyl methacrylate (PAMA) copolymerized with different feed ratios using 1,4‐dioxane as a solvent and α,α'‐azobisisobutyronitrile (AIBN) as an initiator at 60°C. Structure and composition of copolymers for a wide range of monomer feed were determined by elemental analysis (content of N for VIM‐units) and by Fourier transform infrared spectroscopy through recorded analytical absorption bands for VIM (670 cm^?1 for C‐N of imidazole ring) and PAMA (1730 cm^?1 for C?O of ester group) units, respectively. Monomer reactivity ratios for VIM (M₁)‐PAMA (M₂) pair were determined by the application of conventional linearization methods such as Fineman‐Ross (F‐R) and Kelen‐Tüdös (KT) and a nonlinear error invariable model method using a computer program RREVM. The molecular weights (_w and _n) and polydispersity indices of the polymers were determined using gel permeation chromatography (GPC). Thermal behaviors of copolymers with various compositions were investigated by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Also, the apparent thermal decomposition activation energies (ΔE_d) were calculated by Ozawa method using the SETARAM Labsys TGA thermobalance. The antibacterial and antifungal effects of polymers were also tested on various bacteria, fungi and yeast.     

Binary and Ternary Copper(II) Complexes with NIPAAm/IA Copolymers and Aminoacids: Interpretation of UV‐Visible Spectra and Cyclic Voltammograms

The complex formations of homopolymers and copolymers of poly(N‐isopropyl acrylamide) (PNIPAAm), polyacrylamide (PAAm) and poly(itaconic acid) (PIA) with Cu(II) ions in aqueous solutions were studied by using UV‐visible spectra in the region of 200–1100 nm and cyclic voltammograms between ?0.800 V and 0.600 V. According to the optical and electrochemical spectra of the polymer‐ and copolymer‐Cu(II) complexes and their ternary complexes with alanine, i.e., absorptions and the shifts in the wavelength of the maximum absorptions, currents and potentials of the peaks in the pH range of 3–12, the intensities of anodic and cathodic peak currents of polymers containing IA groups decrease with increasing pH and they show maximum absorptions at lower wavelengths than do the homopolymers used in this work. The peak point of the visible band shifts from 800 to 650 nm, with increasing pH, while the intensity of the third anodic peak observed after pH=4 increases in the case of both Ala‐Cu(II) and its ternary solution with P(NIPAAm‐co‐IA, 9.8 mol%). Both the pH‐dependent shifts of maximum absorptions and the appearence of the third anodic peaks as the pH raised were interpreted as a presence of tetracoordinated Cu(II) complexes in the solution and on the electrode surface, involving combined carboxyl, amide and amine interaction.     

Instrumental Dependent Dissociations of n-Propyl/Isopropyl Phosphonate Isomers: Evaluation of Resonant and Non-Resonant Vibrational Activations

Structural elucidation and distinction of isomeric neurotoxic agents remain a challenge. Tandem mass spectrometry can be used for this purpose in particular if a “diagnostic” product ion is observed. Different vibrational activation methods were investigated to enhance formation of diagnostic ions through consecutive processes from O,O-dialkyl alkylphosphonates. Resonant and non-resonant collisional activation and infrared multiphoton dissociation (IRMPD) were used with different mass spectrometers: a hybrid quadrupole Fourier transform ion cyclotron resonance (Qh-FTICR) and a hybrid linear ion trap-Orbitrap (LTQ/Orbitrap). Double resonance (DR) experiments, in ion cyclotron resonance (ICR) cell, were used for unambiguous determination of direct intermediate yielding diagnostic ions. From protonated n-propyl and isopropyl O-O-dialkyl-phosphonates, a diagnostic m/z 83 ion characterizes the isopropyl isomer. This ion is produced through consecutive dissociation processes. Conditions to favor its formation and observation using different activation methods were investigated. It was shown that with the LTQ, consecutive experimental steps of isolation/activation with modified trapping conditions limiting the low mass cut off (LMCO) effect were required, whereas with FT-ICR by CID and IRMPD the diagnostic ion detection was provided only by one activation step. Among the different investigated activation methods it was shown that by using low-pressure conditions or using non-resonant methods, efficient and fast differentiation of isomeric neurotoxic agents was obtained. This work constitutes a unique comparison of different activation modes for distinction of isomers showing the instrumental dependence characteristic of the consecutive processes. New insights in the dissociation pathways were obtained based on double-resonance IRMPD experiments using a FT-ICR instrument with limitation at low mass values.

Optimization of chemical and instrumental parameters in hydride generation laser-induced breakdown spectrometry for the determination of arsenic,antimony, lead and germanium in aqueous samples

A laser induced breakdown spectrometry hyphenated with on-line continuous flow hydride generation sample introduction system, HG-LIBS, has been used for the determination of arsenic, antimony, lead and germanium in aqueous environments. Optimum chemical and instrumental parameters governing chemical hydride generation, laser plasma formation and detection were investigated for each element under argon and nitrogen atmosphere. Arsenic, antimony and germanium have presented strong enhancement in signal strength under argon atmosphere while lead has shown no sensitivity to ambient gas type. Detection limits of 1.1 mg L⁻¹, 1.0 mg L⁻¹, 1.3 mg L⁻¹ and 0.2 mg L⁻¹ were obtained for As, Sb, Pb and Ge, respectively. Up to 77 times enhancement in detection limit of Pb were obtained, compared to the result obtained from the direct analysis of liquids by LIBS. Applicability of the technique to real water samples was tested through spiking experiments and recoveries higher than 80% were obtained. Results demonstrate that, HG-LIBS approach is suitable for quantitative analysis of toxic elements and sufficiently fast for real time continuous monitoring in aqueous environments.     

At-line bioprocess monitoring by immunoassay with rotationally controlled serial siphoning and integrated supercritical angle fluorescence optics

In this paper we report a centrifugal microfluidic “lab-on-a-disc” system for at-line monitoring of human immunoglobulin G (hIgG) in a typical bioprocess environment. The novelty of this device is the combination of a heterogeneous sandwich immunoassay on a serial siphon-enabled microfluidic disc with automated sequential reagent delivery and surface-confined supercritical angle fluorescence (SAF)-based detection. The device, which is compact, easy-to-use and inexpensive, enables rapid detection of hIgG from a bioprocess sample. This was achieved with, an injection moulded SAF lens that was functionalized with aminopropyltriethoxysilane (APTES) using plasma enhanced chemical vapour deposition (PECVD) for the immobilization of protein A, and a hybrid integration with a microfluidic disc substrate. Advanced flow control, including the time-sequenced release of on-board liquid reagents, was implemented by serial siphoning with ancillary capillary stops. The concentration of surfactant in each assay reagent was optimized to ensure proper functioning of the siphon-based flow control. The entire automated microfluidic assay process is completed in less than 30 min. The developed prototype system was used to accurately measure industrial bioprocess samples that contained 10 mg mL⁻¹ of hIgG.     

The Pharmacokinetic Profiles of Pre-Operative Prophylactic Cefepime Application in Pregnant and Non-Pregnant Women Undergoing Surgical Interventions Using a Fully Validated Liquid Chromatographic Method

Pregnancy alters pharmacokinetic profile of many drugs, because of altering body volume and metabolism rate. Therefore, dosage rates and concentrations of drugs must be controlled during pregnancy. Here, we identified the pharmacokinetic profile of pre-operatively given cefepime in caesarean section and gynecological operations using a simple, rapid, cost-effective and valid liquid chromatographic method. The chromatographic separation was performed using 40 mM, pH 3.2 phosphate buffer containing 6 % methanol as mobile phase at 0.30 mL min^?1 flow rate. Gradient elution with methanol was applied to get shorter analysis time without any interference from plasma endogens. During analyses, temperature of column, autosampler and detector were set as 30, 10 and 40 °C, respectively. The detection wavelength was 260 nm and ceftizoxime was used as internal standard. At the optimum conditions, the cefepime analysis from plasma samples was completed in 7 min. Cefepime was extracted from plasma samples using perchloric acid with a very high recovery rate (99.3 %). The method was fully validated according to the Food and Drug Administration guidelines for bioanalytical method validation, and found to be selective, linear, repeatable, reproducible and robust. After validation studies, the method was applied to five caesarean-sectioned and four non-pregnant sectioned women treated with pre-operative, prophylactic single intravenous dose of cefepime (1 g Maxipime^®) in order to determine pharmacokinetic profile of cefepime. Peak serum concentrations of cefepime in caesarean-sectioned women at the arterial port after infusion was 70.11 ± 10.74 μg mL^?1. The mean elimination half-life, volume of distribution and calculated area under the concentration–time curve (AUC)_0–∞ were 1.10 ± 0.23 h, 14.22 ± 2.29 L and 101.55 ± 10.99 μg h mL^?1 for caesarean-sectioned women; and 1.14 ± 0.21 h, 14.76 ± 2.92 L and 104.71 ± 36.34 μg h mL^?1 for non-pregnant sectioned women, respectively. The area under curve, elimination half-life, maximum plasma concentration and the mean distribution volume of cefepime were not changed in case of pregnancy.     

Heterogenous Oxidation of [2.2.1] Bridged Bicyclic Alkenes with KMnO4-CuSO4.5H2O: An Alternative Ozonolysis

Seven [2.2.1] bridged alkenes were cleaved to the corresponding dialdehyde products by neutral heterogenous oxidation with KMnO₄-CuSO₄.5H₂O. While endo, endo-dimethyl bicyclo[2.2.2]oct-5-ene-2,3-dicarboxylate, [2.2.2] bridged alkene, gave the corresponding α-hydroxy ketone, endo, endo-dimethyl bicyclo[3.2.2]non-8-ene-6,7-dicarboxylate afforded a diketone product.     

Beckmann Fragmentation of Diphenylcarbamoylated N-Aryldiphenacylamine Dioximes. New Method for the Synthesis of Imidazooxadiazolones

N-Aryl-N,N-diphenacylamine dioximes were prepared by the reaction of corresponding arylamines with α-bromoacetophenone oxime in ethanol-water at room temperature. These compounds reacted with aryl isocyanates in acetonitrile to give imidazooxadiazolones 9. The probable mechanism of the reaction is discussed.     

Stereoconvergent Generation of a Contrasteric syn‐Bicyclopropylidene (=syn‐Cyclopropylidenecyclopropane) by Stille‐Like Coupling

Stereoisomerically pure endo‐ and exo‐7‐halo‐7‐(trimethylstannyl)benzonorcar‐3‐enes (=endo‐ and exo‐(1‐halo‐1a,2,7,7a‐tetrahydro‐1H‐cyclopropa[b]naphthalen‐1‐yl)trimethylstannane) 4 and 6 were selectively obtained by lithium? tin or magnesium? tin transmetalation in good yields (Scheme 2 and 3). The reaction of these compounds with copper(I) thiophene‐2‐carboxylate (CuTC) produced in both cases the corresponding C_S‐symmetric bicyclopropylidene (=cyclopropylidenecyclopropane) syn‐ 1 , a single diastereoisomer (Schemes 5 and 6). The structure of syn‐ 1 was undoubtedly elucidated by X‐ray single crystal diffraction. The coupling mechanism of the carbenoid cyclopropane is discussed (Scheme 7).