Metal- and ligand-directed one-pot syntheses,crystal structures,and properties of novel oxo-centered tetra- and hexametallic clusters

Starting from closely related metal-ligand combinations, completely different oligomeric metal clusters are synthesized. Whereas, picoline-tetrazolylamide HL(1) (1) and zinc or nickel acetate afforded [2x2] grids [M(4)(L(1))(8)] (2), slightly different N-(2-methylthiazole-5-yl)-thiazole-2-carboxamide HL(2) (5 a) and nickel acetate yielded the monometallic complex [Ni(L(2))(2)(OH(2))(2)] (6). In contrast, reaction of 5 a with zinc acetate produced the tetrametallic zinc cluster [Zn(4)O(L(2))(4)(OAc)(2)] (7). Even more surprising, when 3-methyl-substituted HL(3) (5 b) instead of 2-methyl-substituted HL(2) (5 a) was allowed to react under identical conditions with zinc acetate, the cluster [Zn(4)O(L(3))(4)Cl(2)] (8) crystallized from dichloromethane. Clusters 7 and 8 are isostructural. As for 7, in 8 two of the edges of the tetrahedron of zinc ions are doubly bridged, two are singly bridged, and the other two are nonbridged. On the other hand, when iron(II) acetate under aerobic conditions was allowed to react with 5 a, the unprecedented complex [[Fe(3)O(L(2))(2)(OAc)(4)](2)O] (9) was isolated. Cluster 9 is composed of two trimetallic, triangular mu(3)-O(2-)-centered [Fe(3)O(L(2))(2)(OAc)(4)](+) modules, linked by an almost linear mu(2)-O(2-) bridge. The M?ssbauer spectrum together with cyclic voltammetric and square-wave voltammetric measurements of 9 are reported, and 6-9 were characterized unequivocally by single-crystal X-ray structure analyses.     

A systematic study of the interactions between chemical partners (metal, ligands, counterions, and support) involved in the design of Al2O3-supported nickel catalysts from diamine-Ni(II) chelates

1.5 Ni wt %/Al2O3 catalysts have been prepared by incipient wetness impregnation using [Ni(diamine)x(H2O)(6-2x)]Y2 precursors (diamine = 1,2-ethanediamine (en) and trans-1,2-cyclohexanediamine (tc); x = 0, 1, and 2; Y = NO3- and Cl-), to avoid the formation, during calcination, of difficult-to-reduce nickel aluminate. N2 was chosen for thermal treatment to help reveal and take advantage of the reactions occurring between Ni2+, ligands, counterions, and support. In the case of [Ni(en)2(H2O)2]Y2 salts used as precursors, in situ UV-vis and DRIFT spectroscopies show that after treatment at 230 degrees C Ni(II) ions are grafted to alumina via two OAl bonds and that the diamine ligands still remain coordinated to grafted nickel ions but in a monodentate way, bridging the cation with the alumina surface. With Y = Cl-, the chloride counterions desorb as hydrogen chloride, and hydrogen released upon decomposition of the en ligands is able to reduce a fraction of nickel ions into metal as evidenced by XPS. In contrast, with Y = NO3-, compounds such as CO or NO are formed during thermal treatment, indicating that nitrate ions burn the en ligands. After thermal treatment at 500 degrees C, a surface phase containing Ni(II) ions forms, characterized by XPS and UV-vis spectroscopy. Temperature-programmed reduction shows that these ions can be quantitatively reduced to the metallic state at 500 degrees C, in contrast with the aluminate obtained when the preparation is carried out from [Ni(H2O)6]2+, which is reduced only partly at 950 degrees C. On the other hand, a total self-reduction of nickel complexes leading to 2-5-nm metal particles is obtained upon thermal treatment via the hydrogen released by a hydrogen-rich ligand such as tc, whatever the Y counterion. An appropriate choice of the ligand and the counterion allows then to obtain selectively Ni(II) ions or a dispersed reduced nickel phase after treatment in N2, as a result of the reactions occurring between the chemical partners present on alumina.     

Synthesis and characterization of molybdenum oxo complexes of two tripodal ligands: reactivity studies of a functional model for molybdenum oxotransferases

Reaction of the tetradentate ligand N-(2-hydroxybenzyl)-N,N-bis(2-pyridylmethyl)amine (L-OH) with MoO2Cl2 in methanol in the presence of NaOMe and PF6- results in the formation of [MoO2(L-O)]PF6. Similarly, the reaction of N-(2-mercaptobenzyl)-N,N-bis(2-pyridylmethyl)amine (L-SH) with MoO2(acac)2 leads to the formation of [MoO2(L-S)]+. The dioxo-molybdenum complex [MoO2(L-O)]+ reacts with phosphines in methanol to afford phosphine oxides and an air-sensitive molybdenum complex, tentatively identified as [Mo(IV)O(L-O)(OCH3)]. The latter complex is capable of reducing biological oxygen donors such as DMSO or nitrate, thereby mimicking the activity of DMSO reductase and nitrate reductase. Reaction of [MoO2(L-O)]PF6 with PPh3 in other solvents than methanol leads to the formation of the Mo(V) dimer [(L-O)OMo(micro-O)MoO(L-O)](PF6)2. The crystal structures of [MoO2(L-O)]PF6 and the micro-oxo bridged dimer are presented.     

Basis-independent potential energy curves for the neutral diatomics of Li,Na and K evaluated by means of Hartree-Fock and different density functional potentials

Summary The solution of the Schrödinger equation for diatomic molecules when the finite element method is used gives the possibility to evaluate highly accurate basis-independent potential energy curves. In this work such types of numerically accurate potential energy curves on the HF level have been evaluated for Li₂, Na₂ and K₂ and could be used as benchmarks in the optimization of basis sets. A comparison between recent LCAO HF calculations in which extended basis sets are used and the accurate values determined in this work show that there is a difference in total energy of 4×10^–5 and 10^–3 a.u. for Li, Li₂, and Na, Na₂, respectively. Evaluated dissociation energies are, however, due to the cancellation of numerical errors in much better agreement. Further, it is found that different exchange correlation potentials for the heavier molecules such as those given by von Barth-Hedin and Vosko, Wilk and Nusair reproduce experimental properties such as dissociation energies, vibrational frequencies almost as well as those achieved with advanced CI methods. TheX potential gives accurate bond lengths for Na₂ and K₂, whereas the dissociation energies are too small.     

Formation,preservation, and cleavage of the disulfide bond by vanadium

Reaction of the disulfide [HpicanS](2) (HpicanS is the carboxamide based on picolinate (pic) and o-mercaptoaniline (anS); the [] brackets are used to denote disulfides) with [VOCl(2)(thf)(2)] leads to reductive scission of the disulfide bond and formation of the mixed-valence (V(IV)/V(V)) complex anion [(OVpicanS)(2)mu-O](-) (1), with the dianionic ligand coordinating through the pyridine-N atom, the deprotonated amide-N atom, and thiophenolate-S atom. Reductive cleavage of the SbondS bond is also observed as [VCl(2)(tmeda)(2)] (tmeda=tetramethylethylenediamine) is treated with the disulfides [HsalanS](2) or [HvananS](2) (HsalanS and HvananS are the Schiff bases formed between o-mercaptoaniline and salicylaldehyde (Hsal) or vanillin (Hvan), respectively), yielding the V(III) complexes [VCl(tmeda)(salanS)] (2 a), or [VCl(tmeda)(vananS)] (2 b). The disulfide bond remains intact in the aerial reaction between [HsalanS](2) and [VCl(3)(thf)(3)] to yield the V(V) complex [VOCl[salanS](2)] (3), where (salanS)(2-) coordinates through the two phenolate and one of the imine functions. The S-S bond is also preserved as [VO(van)(2)] or [VO(nap)(2)] (Hnap=2-hydroxynaphthalene-1-carbaldehyde) is treated with bis(2-aminophenyl)disulfide, [anS](2), a reaction which is accompanied by condensation of the aldehyde and the diamine, and complexation of the resulting bis(Schiff bases) [HvananS](2) or [HnapanS](2) to form the complexes [VO[vananS](2)] (4 a) or [VO[napanS](2)] (4 b). In 4 a and 4 b, the phenolate and imine functions, and presumably also one of the disulfide-S atoms, coordinate to V(IV). 2-Mercaptophenyl-2'-pyridinecarboxamide (H(2)picanS) retains its identity in the presence of V(III); reaction between [VCl(3)(thf)(3)] and H(2)picanS yields [V[picanS](2)](-) (5). The dithiophenolate 2,6-bis(mercaptophenylthio)dimethylpyridine (6 a) is oxidized, mediated by VO(2+), to the bis(disulfide) octathiadiaza-cyclo-hexaeicosane 6 b. The relevance of these reactions for the speciation of vanadium under physiological conditions is addressed. [HNEt(3)]-1.0.5 NEt(3,) 3.3 CH(2)Cl(2), [HsalanS](2), [HNEt(3)]-5, and 6 b.4 THF have been characterized by X-ray diffraction analysis.     

Electronic structure calculations of small Al n (n=2–8) clusters

The electronic states of small Al _n (n=2–8) clusters have been calculated with a relativistic ab-initio MO-LCAO Dirac-Fock-Slater method using numerical atomic DFS wave-functions. The excitation energies were obtained from a ground state calculation of neutral clusters, and in addition from negative clusters charged by half an electron in order to account for part of the relaxation. These energies are compared with experimental photo-electron spectra.     

Polarographisches Verhalten der C2-Halogenkohlenwasserstoffe

Summary Investigations on the polarographic and voltammetric behaviour of organic halogen compounds were carried out in order to obtain information on the redox properties and how to develop determination and detection methods. In this second report the dp-polarographic behaviour of the halogen substituted C₂-compounds has been studied in different supporting electrolytes and in various solvents. The electrode processes are discussed and the possibilities for the polarographic determination of the C₂-halogen hydrocarbons. The detection limit is 0.25 g · ml^–1 and the linear current-concentration relationship is observed up to 25 g · ml^–1. A simple and rapid method is proposed for the dp-polarographic determination of 1,2-dibromoethane in gasoline; the relative standard deviation for 20 g · ml^–1 is ±1.8%.     

Final elucidation of the absolute configuration of the signal metabolite hormaomycin

The complete absolute configuration of hormaomycin 1 a has been established by HPLC and HPLC/MS experiments with appropriately derivatized 4-propylprolines, (2S,4S)-6 and (2R,4R)-6, as well as 4-(Z)-propenylprolines, cis-5 and trans-5, and also feeding experiments with enantiomerically pure samples of the deuterium-labeled 3-(2'-nitrocyclopropyl)alanine, (2S)-3,3-[D2]15 and (2S)-2,2'-[D2]15, and 4-(Z)-propenylproline 2',4-[D2]-(2S,4R)-5. The latter five amino acids were prepared for the first time and allowed one to unequivocally assign the hitherto unknown absolute configurations of the last four stereocenters in hormaomycin 1 a. As a bonus, some new information about the biosynthesis of this molecule has also been gathered.     

Implementation of a general multireference configuration interaction procedure with analytic gradients in a semiempirical context using the graphical unitary group approach

The graphical unitary group approach has been applied in an efficient implementation of a general multireference configuration interaction (MRCI) method for use with small active molecular orbital spaces in a semiempirical framework. Gradients can be computed analytically for molecular orbitals from a closed-shell or a half-electron open-shell Hartree-Fock calculation. CPU times for single point energy and gradient calculations are reported. The code allows MRCI geometry optimizations of large molecules, as illustrated for the singlet ground state and the four lowest triplet states of fullerene C(76).