Rational Design and Development of Anisotropic and Mechanically Strong Gelatin‐Based Stress Relaxing Hydrogels for Osteogenic/Chondrogenic Differentiation

Rational design and development of tailorable simple synthesis process remains a centerpiece of investigational efforts toward engineering advanced hydrogels. In this study, a green and scalable synthesis approach is developed to formulate a set of gelatin‐based macroporous hybrid hydrogels. This approach consists of four sequential steps starting from liquid‐phase pre‐crosslinking/grafting, unidirectional freezing, freeze‐drying, and finally post‐curing process. The chemical crosslinking mainly involves between epoxy groups of functionalized polyethylene glycol and functional groups of gelatin both in liquid and solid state. Importantly, this approach allows to accommodate different polymers, chitosan or hydroxyethyl cellulose, under identical benign condition. Structural and mechanical anisotropy can be tuned by the selection of polymer constituents. Overall, all hydrogels show suitable structural stability, good swellability, high porosity and pore interconnectivity, and maintenance of mechanical integrity during 3‐week‐long hydrolytic degradation. Under compression, hydrogels exhibit robust mechanical properties with nonlinear elasticity and stress‐relaxation behavior and show no sign of mechanical failure under repeated compression at 50% deformation. Biological experiment with human bone marrow mesenchymal stromal cells (hMSCs) reveals that hydrogels are biocompatible, and their physicomechanical properties are suitable to support cells growth, and osteogenic/chondrogenic differentiation, demonstrating their potential application for bone and cartilage regenerative medicine toward clinically relevant endpoints.     

Batch Fermentation Model of Propionic Acid Production by Propionibacterium acidipropionici in Different Carbon Sources

Propionic acid (PA) is widely used as additive in animal feed and also in the manufacturing of cellulose-based plastics, herbicides, and perfumes. Salts of propionic acid are used as preservative in food. PA is mainly produced by chemical synthesis. Nowadays, PA production by fermentation of low-cost industrial wastes or renewable sources has been an interesting alternative. In the present investigation, PA production by Propionibacterium acidipropionici ATCC 4965 was studied using a basal medium with sugarcane molasses (BMSM), glycerol or lactate (BML) in small batch fermentation at 30 and 36 degrees C. Bacterial growth was carried out under low dissolved oxygen concentration and without pH control. Results indicated that P. acidipropionici produced more biomass in BMSM than in other media at 30 degrees C (7.55 g l(-1)) as well as at 36 degrees C (3.71 g l(-1)). PA and biomass production were higher at 30 degrees C than at 36 degrees C in all cases studied. The best productivity was obtained by using BML (0.113 g l(-1) h(-1)), although the yielding of this metabolite was higher when using glycerol as carbon source (0.724 g g(-1)) because there was no detection of acetic acid. By the way, when using the other two carbon sources, acetic acid emerged as an undesirable by-product for further PA purification.     

Hydrolytic and photoinduced degradation of tribenuron methyl studied by HPLC-DAD-MS/MS

The paper studies, with the help of HPLC-DAD-MS/MS technique, the hydrolytic and photoinduced degradation processes that take place in aqueous solutions of tribenuron methyl, both when preserved in the dark and when undergoing solar box irradiation under conditions that simulate sun light. The results indicate that the degradation products formed by hydrolysis alone and by photoirradiation are the same, but kinetics of the hydrolysis reaction is much slower. The degradation products are identified as 2-methoxy-4-methylamino-6-methyl-1,3,5-triazine (P1), methyl 2-aminosulfonylbenzoate (P2), and saccharin (P3) and quantified. Ecotoxicological biotests performed on 0.1 microg L(-1) photoirradiated solutions of the herbicide give a border line toxicity situation comparable to that of the precursor and indicate that the herbicide is characterized by low persistence in the environment, as required. Its degradation, however, does not lead to mineralization but to the formation of products of comparable toxicity. To evaluate the matrix effects, the photodegradation of the herbicide is also studied in the presence of rice paddy waters: the process is slower than in ultrapure water but leads to the same products. Experiments performed for comparison by irradiating ultrapure water solutions with UV lamp (254 nm) show that the degradation process is not only faster with respect to sunlight, but gives a different pathway, without in anyway leading to mineralization.     

Square wave adsorptive cathodic stripping voltammetry automated by sequential injection analysis Potentialities and limitations exemplified by the determination of methyl parathion in water samples

This paper describes the development and evaluation of a sequential injection method to automate the determination of methyl parathion by square wave adsorptive cathodic stripping voltammetry exploiting the concept of monosegmented flow analysis to perform in-line sample conditioning and standard addition. Accumulation and stripping steps are made in the sample medium conditioned with 40 mmol L⁻¹ Britton-Robinson buffer (pH 10) in 0.25 mol L⁻¹ NaNO₃. The homogenized mixture is injected at a flow rate of 10 μL s⁻¹ toward the flow cell, which is adapted to the capillary of a hanging drop mercury electrode. After a suitable deposition time, the flow is stopped and the potential is scanned from −0.3 to −1.0 V versus Ag/AgCl at frequency of 250 Hz and pulse height of 25 mV. The linear dynamic range is observed for methyl parathion concentrations between 0.010 and 0.50 mg L⁻¹, with detection and quantification limits of 2 and 7 μg L⁻¹, respectively. The sampling throughput is 25 h⁻¹ if the in line standard addition and sample conditioning protocols are followed, but this frequency can be increased up to 61 h⁻¹ if the sample is conditioned off-line and quantified using an external calibration curve. The method was applied for determination of methyl parathion in spiked water samples and the accuracy was evaluated either by comparison to high performance liquid chromatography with UV detection, or by the recovery percentages. Although no evidences of statistically significant differences were observed between the expected and obtained concentrations, because of the susceptibility of the method to interference by other pesticides (e.g., parathion, dichlorvos) and natural organic matter (e.g., fulvic and humic acids), isolation of the analyte may be required when more complex sample matrices are encountered.     

On Dupin Hypersurfaces in R5 Parametrized by Lines of Curvature

We provide a complete local characterization of Dupin hypersurfaces in R⁵, with four distinct principal curvatures, parametrized by lines of curvature. Such hypersurfaces are given in terms of the principal curvatures and vector valued functions that describe plane curves. We include explicit examples of such Dupin hypersurfaces which are irreducible and have nonconstant Lie curvature.     

Immobilization of Candida antarctica lipase B by covalent attachment to green coconut fiber

The objective of this study was to covalently immobilize Candida antarctica type B lipase (CALB) onto silanized green coconut fibers. Variables known to control the number of bonds between enzyme and support were evaluated including contact time, pH, and final reduction with sodium borohydride. Optimal conditions for lipase immobilization were found to be 2 h incubation at both pH 7.0 and 10.0. Thermal stability studies at 60 degrees C showed that the immobilized lipase prepared at pH 10.0 (CALB-10) was 363-fold more stable than the soluble enzyme and 5.4-fold more stable than the biocatalyst prepared at pH 7.0 (CALB-7). CALB-7 was found to have higher specific activity and better stability when stored at 5 degrees C. When sodium borohydride was used as reducing agent on CALB-10 there were no improvement in storage stability and at 60 degrees C stability was reduced for both CALB-7 and CALB-10.     

Nisin production utilizing skimmed milk aiming to reduce process cost

Nisin is a natural additive for conservation of food, pharmaceutical, and dental products and can be used as a therapeutic agent. Nisin inhibits the outgrowth of spores, the growth of a variety of gram-positive and gram-negative bacteria. This study was performed to optimize large-scale nisin production in skimmed milk and subproducts aiming at low-costs process and stimulating its utilization. Lactococcus lactis American Type Culture Collection (ATCC) 11454 was developed in a rotary shaker (30 degrees C/36 h/100 rpm) in diluted skimmed milk and nisin activity, growth parameters, and media components were also studied. Nisin activity in growth media was expressed in arbitrary units (AU/mL) and converted to standard nisin concentration (Nisaplin, 25 mg of pure nisin is 1.0x10(6) AU/mL). Nisin activity in skimmed milk 2.27 g(total solids) was up to threefold higher than transfers in skimmed milk 4.54 g(total solids) and was up to 85-fold higher than transfers in skimmed milk 1.14 g(total solids). L. lactis was assayed in a New Brunswick fermentor with 1.5 L of diluted skimmed milk (2.27 g(total solids)) and airflow of 1.5 mL/min (30 degrees C/36/200 rpm), without pH control. In this condition nisin activity was observed after 4 h (45.07 AU/mL) and in the end of 36 h process (3312.07 AU/mL). This work shows the utilization of a low-cost growth medium (diluted skimmed milk) to nisin production with wide applications. Furthermore, milk subproducts (milk whey) can be exploited in nisin production, because in Brazil 50% of milk whey is disposed with no treatment in rivers and because of high organic matter concentrations it is considered an important pollutant. In this particular case an optimized production of an antimicrobial would be lined up with industrial disposal recycling.     

Evaluation of different polymerase chain reaction methods for the identification of Vibrio parahaemolyticus strains isolated by cultural methods

Control of contamination by Vibrio parahaemolyticus in fishery products is often hampered by the lack of standardized methods and by the uncertainty associated with biochemical identification of the isolates. In this study, 5 polymerase chain reaction (PCR) methods for the identification of V. parahaemolyticus to the species level were evaluated by using 25 Vibrio reference strains and 163 isolates from fishery products, environmental sources, and clinical samples. Sequence targets of the methods were toxR, gyrB, and tlh genes (tested with 2 protocols), and the fragment pR72H. Isolate identification was confirmed by sequencing of the 16S rRNA gene and by PCR protocols for the identification of other Vibrio species. The PCR assay targeting the toxR gene achieved the highest performance (100% inclusivity and exclusivity). The 2 PCR protocols based on tlh gene detection, although showing the same inclusivity (100%), differed in the exclusivity (50 and 91%, respectively). Finally, the results provided by the PCR assays targeting the gyrB gene and pR72H fragment were less reliable and, in some cases, difficult to assess. According to the results of this study, the characteristics of accuracy expressed by the toxR identification method make it a suitable candidate as a reference method for the molecular identification of V. parahaemolyticus strains.