Determination of cisplatin and related platinum complexes in plasma ultrafiltrate and urine by high-performance liquid chromatography with on-line radioactivity detection

A reversed-phase ion-pair chromatographic method with on-line radioactivity detection for the simultaneous determination of 195mPt-labelled cisplatin and related platinum complexes has been developed. With this system a good resolution of various radiolabelled platinum complexes can be achieved. The detection limit of the radioactivity detector is 10 ng of cisplatin (specific activity of 15 MBq/mg cisplatin) per millilitre of urine or plasma ultrafiltrate. The detector response is independent of both the chemical structure of the platinum complexes and the matrix composition of the samples. This method may serve as a reference system for other high-performance liquid chromatographic systems with less specific and sensitive detectors.     

Stability study and quantitative determination of mebeverine hydrochloride in tablets by means of reversed-phase high-performance liquid chromatography

Summary A rapid and specific reversed-phase high-performance liquid chromatographic method (RPHPLC) is described for the determination of mebeverine hydrochloride in tablets. Elution was performed on an octyl silane column with a methanol-water mixture (75-25), containing 0.05% hexylamine as silanol-blocking agent, adjusted to pH 5.0 with phosphoric acid. The method gave accurate, precise and reproducible results. The mean recovery of the drug from six synthetic tablet mixtures was 100.0% with a relative standard deviation (RSD) of 0.94%. In order to test the specificity of the method, the interference of the degradation compounds of mebeverine hydrochloride and of the intermediates from the synthesis was investigated. None of them did interfere. By means of mass spectrometry and UV-spectrophotometry, the degradation compounds of mebeverine were identified as veratric acid and as 4-|ethyl-[2-(4-methoxyphenyl)-1-methylethyl]amino| 1-butanol. The stability study proved that mebeverine hydrochloride is very stable in tablets; the tablets still contain more than 95% of the declared drug potency after storage for more than one year at 50°C.Colofac; Duspatal; Duspatalin     

Syntheses and configurations of some heterocyclic amidoximes. X-Ray crystal structure of 3-phenyl-5,6-dihydro-2(1H)-pyrazinone-O-methyloxime

O-Methyl-α-ketophenylacetohydroximoyl chloride ( 1 ) was prepared by the reaction of O-methyl-α-methoxyphenylacetohydroximoyl chloride ( 5 ) with N-bromosuccinimide and concentrated hydrobromic acid. Reaction of 1 with ethylenediamine gave 3-phenyl-5,6-dihydro-2(1H)-pyrazinone-O-methyloxime ( 6 ). 3-Phenyl-5,6-cyclohexano-5,6-dihydro-2(1H)-pyrazininone-O-methyloxime ( 7 ) was prepared by reaction of 1 with trans-1,2-diaminocyclohexane. The X-ray structure of 6 has been determined. The crystals are orthorhombic, space group Pbca with a = 10.264(3), b = 18.262(4), c = 23.530(4)Å, V = 4411(2)ų, and Z = 16. The structure, which was refined to R = 0.038 using 1652 observed reflections, shows the amidoxime moiety to be the Z configuration. Reaction of benzohydroximoyl chloride with aziridine gave (Z)-aziridinylbenzaldoxime ( 16a ). Ultraviolet irradiation of a benzene solution of 16a gave a mixture of the Z and E isomers 16a and 16b . The E isomer 16b underwent thermal isomerization to 16a at 100°. Reaction of 16a with dimethyl sulfate in sodium hydroxide solution gave (Z)-O-methylaziridinylbenzaldoxime ( 17a ). Photoisomerization of a hexane solution of 17a gave a mixture of the Z and E isomers 17a and 17b which were separated by preparative glc. The isomers 17a and 17b are resistant to thermal Z = E isomerization. The mechanisms of thermal isomerization of benzamidoximes are discussed.     

Synthesis and photoluminescence of single crystals europium ion-doped BaF2 cubic nanorods

In this work, we used the hydrothermal method to synthesize Eu³⁺ ion-doped cubic BaF₂ nanorods, which is a luminescent material. The clubbed structures were well crystallized and exhibited face-centred cubic structures, as indicated by powder X-ray diffraction, scanning electron microscopy, electron diffraction, and transmission electron microscopy. The luminescent properties were studied, and local symmetry surrounding Eu³⁺ ions and electronic transition processes included. The results indicated that Eu³⁺ occupied only one C_4ν site in nanorods.     

Mass spectrometric identification of a candidate biomarker peptide from the in vitro interaction of epichlorohydrin with red blood cells

The reaction products of epichlorohydrin with human alpha- and beta- globins, obtained through in vitro incubation of these compounds and red blood cells, were determined by using reversed-phase high-performance liquid chromatography (RP-HPLC), electrospray ionization mass spectrometry and matrix-assisted laser desorption/ionization tandem mass spectrometry. The alpha-globin was much more reactive than the beta-globin. At low incubation ratios, approximating the order of magnitude of epichlorohydrin concentration as found in workplaces, the only modified peptide still detectable was the 62-90 belonging to the alpha-chain and carrying an incremental mass of 92 u on either His72 or His89. Given that the two peptides co-eluted in a single chromatographic peak during RP-HPLC separation, they could be chosen as suitable biomarkers for quantification in the setting up of a new methodology for the biological monitoring of persons occupationally exposed, replacing currently known procedures.     

Studies on crosslinking of EPDM-PE blends by thermoanalytical techniques

The effect of blend ratio and peroxide concentration on crosslinking characteristics of EPDM-PE blends were studied by Differential Scanning Calorimetry, Brabender plasticorder and Rheometer. Crosslinking of EPDM-PE blends follows first order reaction kinetics. The curing exotherm increases but activation energy decreases with increase in EPDM content in the blends. The same however increases with the increase in concentration of DCP upto a certain level, while the activation energy is almost independent of peroxide concentration. The cure rate increases whereas optimum cure time and energy consumption for curing decrease with increase in the EPDM-PE ratio. A method for determination of crosslinking efficiency in the case of blend systems was developed from high temperature modulus to predict the properties and the curing behaviour of the blends.

---

Zusammenfassung Mittels DSC, Brabender Plasticorder und Rheometer wurde der Einfluß von Mischungsverhältnis und Peroxidkonzentration auf den Vernetzungsverlauf von EPDM-PE-Gemischen untersucht. Die Vernetzung von EPDM-PE-Gemischen verläuft nach einer Reaktion erster Ordnung. Je höher der Anteil von EPDM im Gemisch, um so exothermer ist die Vernetzung und um so kleiner ist die dazugehörige Aktivierungsenergie. Mit dem Anwachsen der DCP-Konzentration bis zu einem gewissen Niveau wächst der exotherme Charakter, während die Aktivierungsenergie fast unabhängig von der Peroxidkonzentration ist. Mit dem Anstieg des EPDM/PE-Verhältnisses wächst die vernetzungsgeschwindigkeit, während die optimale Vernetzungszeit und der Energieverbrauch für die Vernetzung sinken. Es wurde ein Verfahren zur Bestimmung der Vernetzungseffizienz bei Mischsystemen entwickelt, um Eigenschaften und Vernetzungsverhalten von Gemischen voraussagen zu können.

     

On the synthesis of geometric isomers of 2-methyl (or phenyl)-4-[α-arylethylidene]-5(4H)-oxazolones

Several Z-2-methyl(or phenyl)-4-[α-arylethylidene]-5(4H)-oxazolones 3Z, 4Z were prepared. The results obtained were compared by diazomethane insertion and condensation procedure. In order to synthesize E-2-phenyl-4-[α-arylethylidene]-5(4H)-oxazolones 4E hydrogen bromide isomerization in dry benzene was used.     

On-line high-performance liquid chromatographic diode array spectrophotometric analysis of steroidal hormones in illegal preparations

An on-line high-performance liquid chromatographic diode array spectroscopic analytical method for the identification of more than 60 different steroidal compounds is described. For the chromatographic separation, a gradient elution that could distinguish the esterified and non-esterified steroids in the same run on a reversed-phase C18 column, using methanol as modifier, was developed. For both types of compound an internal standard was chosen to establish reproducible relative retention times that could be used as one element of the identification; the second element is the UV spectrum, which is recorded on-line during the separation. The combination of chromatographic and UV spectroscopic recordings selects only a few probable steroids, which could be the unknown. This approach has been applied to forensic analysis of illicit preparations used in cattle-breeding, some examples of which are shown. For those steroids that are very difficult to distinguish using this procedure, because of their chromatographic and spectroscopic similarity on this system, other solvent mixtures are used in place of methanol as modifier, namely acetonitrile or tetrahydrofuran, or both, with the same solvent strength, as proposed by Snyder. In this way totally different elution patterns and separations are obtained, providing complementary information for identification, as shown by the systematic analysis on two other isoeluotropic solvent systems.     

Volumes,heat capacities and solubilities of amyl compounds in decyltrimethylammonium bromide aqueous solutions

Apparent molar heat capacities and volumes of amylamine (PentNH₂) 0.02m, capronitrile (PentCN) 0.02m and nitropentane (PentNO₂) 0.009m in decyltrimethylammonium bromide (DeTAB) micellar solutions, in water and in octane were measured at 25°C. By assuming that their concentration approaches the standard infinite dilution state, heat capacities and volumes were rationalized by means of previously reported equations following which the distribution constant between the aqueous and the micellar phase and heat capacity and volume of the additives in both phases are simultaneously derived. The present results are compared to those we have previously obtained for pentanol (PentOH). The thermodynamic properties of PentNH₂ in water and in micellar phase are substantially identical to those of PentOH but different from those of PentCN and PentNO₂ whereas the opposite behavior was observed in their pure liquid state and in octane. The nature of the solvent medium seems to affect the thermodynamic behavior of PentNH₂. Also, the study of the apparent molar heat capacities of the amyl compounds investigated here in micellar solutions as a function of surfactant concentration shows evidence of a maximum at about 0.4m DeTAB, which can be attributed to a micellar structural transition. Accordingly, the solubilities of PentCN and PentNO₂ as a function of the DeTAB concentration drop in the neighborhood of the concentration where heat capacities display the maximum.