Concise enantioselective total syntheses of (+)-homochelidonine, (+)-chelamidine, (+)-chelidonine, (+)-chelamine and (+)-norchelidonine by a Pd II-catalyzed ring-opening strategy

New enantioselective syntheses of the B/C hexahydrobenzo[c]phenanthridine alkaloids (+)-homochelidonine, (+)-chelamidine, (+)-chelidonine, (+)-chelamine, and (+)-norchelidonine are described. Our rapid and convergent route to this class of natural products involved the development and application of a Pd II-catalyzed asymmetric ring-opening reaction of a meso-azabicyclic alkene with an aryl boronic acid as the key step. By screening a variety of functionalized ortho-substituted aryl boronic acids, chiral ligands and reaction conditions we were able to prepare the requisite cis-1-amino-2-aryldihydronaphthalenes in high yield and in up to 90 % ee. Early attempts to complete the synthesis of (+)-homochelidonine using an N-Boc azabicyclic alkene are described in full. The successful route required a protecting group alteration followed by B ring formation and then stereoselective installation of the C-11 syn-hydroxy group by regioselective epoxide ring-opening using a hydride source. Ring-opening of the same epoxide intermediate with water ultimately led to the synthesis of (+)-chelamidine. The same strategy was then used to synthesize the other structurally similar B/C hexahydrobenzo[c]phenanthridine alkaloids, (+)-chelidonine, (+)-chelamidine, and (+)-norchelidonine.     

Dynamics of DNA adsorption on and release from SDS-DDAB cat-anionic vesicles: a multitechnique study

DNA adsorption and release from cat-anionic vesicles made of sodium dodecylsulfate-dodecyldimethylammonium bromide (SDS-DDAB) in nonstoichiometric amounts was investigated by different electrochemical, spectroscopic, and biomolecular strategies. The characterization of the vesicular system was performed by dynamic light scattering, which allowed estimating both its size and distribution function(s). The interaction dynamics was followed by dielectric spectroscopy and zeta-potential, as well as by agarose gel electrophoresis, AGE. Also, circular dichroism, CD, measurements were carried out, to ascertain possible structural rearrangements of DNA, consequent to the interactions with the cat-anionic vesicles. CD demonstrates that vesicle-bound DNA retains its native conformation. The results obtained by the aforementioned techniques are consistent and indicate that binding saturation is obtained at a [DNA/vesicles] charge ratio close to 0.8, considering only the excess surface charges on the vesicles. This result is apparently in contradiction with a purely electrostatic approach and is tentatively ascribed to the distance between charges on the biopolymer and the vesicle surface, respectively. A possible interpretation is discussed. The nucleic acid can be completely retrieved from the vesicles upon addition of adequate amounts of SDS, which is the defective surfactant in the vesicular system. Precipitation of the poorly soluble SD-DDA salt results in an almost complete release of DNA.     

In vitro solar protection factor,antioxidant activity,and stability of a topical formulation containing Benitaka grape (Vitis vinifera L.) peel extract

Abstract

A flavonoid enriched extract (FE) was obtained from grape peels, and in vitro SPF, antioxidant activity, and effects on cell viability of this extract were tested with the intent to develop a cosmetic product. A formulation was developed with the FE, and the stability of this mixture was evaluated in terms of pH, density, viscosity, and SPF (90-days). FE showed no cytotoxicity to human keratinocytes and an in vitro SPF of 18.56 (UV-spectrophotometry). Further, FE showed a UVA protection factor of 3.17?±?0.2, a critical wavelength of 318.0?±?0.1 and a UVA/UVB of 0.9. Antioxidant activity assays resulted in 92.08% and 86.85% of activity against DPPH and ABTS (IC₅₀ = 296.90?±?1.2?µg/mL and 643.13?±?0.9?µg/mL), respectively. Finally, SPF of formulation with FE was 12.45. Results from the in vitro SPF and product stability tests (especially storage under refrigeration), indicate that FE is a promising compound for use as an innovative sunscreen formulation.     

Aspects of the thermal and photostabilisation of high styrene-butadiene copolymer (SBC)

The thermal and photo-oxidative stabilisation of high styrene-butadiene copolymer (SBC) with high styrene content (K-Resin) has been studied using a variety of analytical and spectroscopic methods including yellowness, luminescence and FT-IR spectroscopy coupled with hydroperoxide analysis in order to understand the nature and effectiveness of the processes involved. The next stage of the program was to evaluate the effects of various chemical/solvent treatments on the role of metal ions/residual catalysts and hydroperoxides in the thermal and photostabilisation of SBS as well as combinations of phenolic antioxidants and phosphites/phosphonites. Other additives, such as HALS and a metal deactivator, were also added to the combinations of phenolic and phosphite antioxidants in order to study their behaviour and efficiency. The chemical treatments appeared to stabilise SBS against thermal oxidation to a greater or lesser extent. Phosphoric acid treatment via reflux and zinc dithiocarbamate treatments showed better performances than the rest of the treatments, the latter was particularly effective at inhibiting the discolouration. During photo-oxidation, on the other hand, chemical treatments involving phosphoric acid and pre-thermal effects showed the importance of catalyst effects. The addition of phenolic antioxidants, phosphites/phosphonites, metal deactivator and HALS was found to stabilise the SBS against thermal and photo-oxidation. In thermal oxidation, the combination of Irganox^® 1010/Irgafos^® 168 was found to effectively stabilise the polymer when the finalisation of the polymerisation was with adipic acid. When the same antioxidants were used, but with polymer finalised with BHT, strong yellowing was observed and a higher amount of hydroperoxides and oxidation products. Increasing the amount of antioxidants did not increase the stabilisation efficiency. The stabilisation efficiency of Irganox^® 1010 combined with Alkanox^® P-24 was found to be more effective than when it was combined with Irgafos^® 168. The formulations containing Irgafos^® 168/Irganox^® 1010 and Irgafos^® 168/Irganos^® 1330 were more effective in colour protection and retarding the formation of oxidation products than the combinations of Irgafos^® 168/Irganox^® 3114 and Irgafos^® 168/Lowinox^® 1790. The effect of the addition of HALS, such as Tinuvin^® 770, Tinuvin^® 622 and Chimassorb^® 944, and a metal deactivator, such as Irganox^® MD 1024, to the combination of Irgafos^® 168/Irganox^® 1010 was found to be antagonistic. In photo-oxidation, a combination of Irganox^® 1010/Irgafos^® 168 protected the polymer efficiently, when the polymerisation of the polymer was finalised with adipic acid. When the polymerisation was finalised with BHT, a higher amount of hydroperoxides and oxidation products was found. An increase in the amount of antioxidants did not enhance the stability of the polymer. The addition of Alkanox^® P-24 exhibited an opposite effect to that seen in thermal oxidation, as the stabilisation efficiency was less effective than with Irgafos^® 168. The formulation containing Irgafos^® 168/Irganox^® 1010 was found to be the most efficient compared with the other phenolic antioxidants. The addition of Tinuvin^® 770 to the formulation Irgafos^® 168/Irganox^® 1010 was found to have a synergistic effect. The addition of polymeric HALS or Irganox^® MD 1024, a metal deactivator, had an antagonistic effect on the stabilisation of the polymer. Disruption of the excimer sites in the styrenic phase also correlated with stabilisation effects.     

"Click" dendrimers: synthesis, redox sensing of Pd(OAc)2, and remarkable catalytic hydrogenation activity of precise Pd nanoparticles stabilized by 1,2,3-triazole-containing dendrimers

"Click" dendrimers containing 1,2,3-triazolyl ligands that coordinate to PdII(OAc)2 have been synthesized in view of catalytic applications. Five of these dendrimers contain ferrocenyl termini directly attached to the triazole ligand in order to monitor the number of PdII that are introduced into the dendrimers by cyclic voltammetry. Reduction of the PdII-triazole dendrimers by using NaBH4 or methanol yields Pd nanoparticles (PdNPs) that are stabilized either by several dendrimers (G0, DSN) or by encapsulation inside a dendrimer (G1 and G2: DEN), as confirmed by TEM. Relative to PAMAM-DENs (PAMAM=poly(amidoamine)), the "click" DSNs and DENs show a remarkable efficiency and stability for olefin hydrogenation under ambient conditions of various substrates. The influence of the reductant of PdII bound to the dendrimers is dramatic, reduction with methanol leading to much higher catalytic activity than reduction with NaBH4. The most active NPs are shown to be those derived from dendrimer G1, and variation of its termini groups (ferrocenyl, alkyl, phenyl) allowed us to clearly delineate, optimize, and rationalize the role of the dendrimer frameworks on the catalytic efficiencies. Finally, hydrogenation of various substrates catalyzed by these PdNPs shows remarkable selectivity features.     

A family of hydrogels based on ureido-linked aminopolyol-derived amphiphiles and bolaamphiphiles: synthesis, gelation under thermal and sonochemical stimuli, and mesomorphic characterization

This article describes the systematic preparation of a novel family of carbohydrate amphiphiles and bolaamphiphiles in which hydrophilic and hydrophobic units are connected via a ureido or bis(ureido) moiety. The sugar core is derived from aminopolyols such as D-glucamine (1), N-methyl-D-glucamine (2), or the sugar-like species tris(hydroxymethyl)aminomethane (3). The O-unprotected derivatives behave as self-organizing nonionic surfactants with good water gelation ability, which can be induced under thermal or ultrasound-driven stimuli. In addition, some derivatives of 1 and 2, and rarely 3 also formed lyotropic liquid crystals with lamellar or hexagonal structures that exhibit low-temperature transitions.     

Aurophilic self-assembly of a Mo4Au2 phosphinidene complex with an unprecedented H-shaped planar metal core

The isomers [Mo2Cp2(mu-kappa(1):kappa(1),eta(6)-PR*)(CO)2] (1) and [Mo2Cp(mu-kappa(1):kappa(1),eta(5)-PC5H4)(CO)2(eta(6)-HR*)] (2) (Cp = eta(5)-C5H5; R* = 2,4,6-C6H2(t)Bu3) react with [AuCl(THT)] and with the cation [Au(THT)2](+) (THT = tetrahydrothiophene) to give phosphinidene-bridged Mo2Au complexes resulting from the addition of an AuCl or Au(THT)(+) electrophile to their multiple P-Mo bonds. Removal of the Cl(-) or THT ligand from these derivatives causes a dimerization of the trinuclear structures to give the cationic derivative [{AuMo2Cp(mu3-kappa(1):kappa(1):kappa(1),eta(5)-PC5H4)(CO)2(eta(6)-HR*)}2](2+), which displays a novel H-shaped metal core held by strong Mo-Au dative bonds [2.768(1) A] and an aurophilic interaction [Au-Au = 3.022(1) A].     

<Emphasis Type="Italic">N</Emphasis>-(2-(2-Pyridyl)ethyl)chitosan (PEC) for Pd(II) and Pt(IV) sorption from HCl solutions

Chitosan was modified by grafting 2-pyridyl-ethyl moieties on the biopolymer backbone for the synthesis of a Platinum Group Metal (PGM) sorbent. The sorbent was tested for Pd(II) and Pt(IV) sorption from HCl solutions. Stable for HCl concentrations below 0.5 M, the sorbent reached sorption capacities as high as 3.2 and 2.6 mmol metal g⁻¹ for Pd(II) and Pt(IV), respectively. Metal sorption mainly proceeds by electrostatic attraction in acidic solutions, though a contribution of complexation mechanism cannot be totally rejected. The resistance to intraparticle diffusion is the main controlling mechanism for uptake kinetics. While agitation speed has a limited effect on kinetics, metal concentration and sorbent dosage have a greater effect on the kinetic profiles. The intraparticle diffusivity varies between 3 × 10⁻¹¹ and 4.5 × 10⁻¹⁰ m² min⁻¹. Thiourea (combined with HCl solution) is used for Pd(II) and Pt(IV) desorption. The resin could be desorbed and recycled for a minimum of five cycles maintaining high efficiencies of sorption and desorption.     

The Terpenoids of Maytenus boaria MOL. (Celastraceae)

The known triterpenoids β-amyrin (= olean-12-en-3β-ol; 22 ), lupeol (= lup-20(29)-en-3β-ol; 17 ), betulin (= lup-20(29)-ene-3β,28-diol; 18 ), lup-20(29)-ene-3β,30-diol ( 20 ), oleanolic acid (= 3β-hydroxyolean-12-en-28-oic acid; 21 ), and betulonic acid (= 3-oxolup-20(29)-en-28-oic acid; 19 ), together with epicatechol (= cis-2-(3,4-dihydroxyphenyl)-3,4-dihydro-2H-1-benzopyran-3,5,7-triol; 23 ), 5′-O-methylgallocatechol (= trans-2-(3,4-dihydroxy-5-methoxyphenyl)-3,4-dihydro-2H-1-benzopyran-3,5,7-triol; 24 ), and 4-hydroxybenzaldehyde were isolated from the aerial parts of Maytenus boaria (MOL. ). Additonally, the eight 4,C⁴-dihydro-β-agarofuran sesquiterpenoids 1–8 , one of them a diol with a (4R)-configuration, and compound 9 were present in the extract. The structures of these compounds were established by spectroscopic and chemical means.     

Carbon nanotubes/pentacyaneferrate-modified chitosan nanocomposites platforms for reagentless glucose biosensing

The design, characterization and applicability of a nanostructured biosensor platform are described. The biosensor is developed through the immobilization of three components: a polymeric chitosan network previously modified with a redox mediator (denoted as PCF-Pyr-Ch), an enzyme (glucose oxidase, chosen as a model) and carbon nanotubes onto a solid glassy carbon electrode (C). In order to assess the influence of the nanomaterial in the performance of the resulting analytical device, a second biosensor, free of carbon nanotubes, is developed. The characterization of both biosensing platforms was performed in aqueous phosphate buffer solutions using atomic force microscopy technique. In the presence of glucose, both systems exhibit a clear electrocatalytic activity, and glucose could be amperometrically determined at +0.35 V versus Ag/AgCl. The performance of both biosensors was evaluated in terms of sensitivity, detection limit and linear response range. Finally, the enhancement of the analytical response induced by the presence of carbon nanotubes was evaluated.