Structure modulated electronic contributions to metalloenediyne reactivity: synthesis and thermal Bergman cyclization of MLX2 compounds

The synthesis of novel metalloendiyne complexes MLRX(2) (where L = 1,4-dibenzyl/diethyl-1,4-diaza-cyclododec-8-ene-6,10-diyne, X = halogen) are reported with their X-ray crystal structures and thermal Bergman cyclization temperatures. Two distinct types of constructs are obtained; the Zn(II) compounds are tetrahedral, while the Cu(II) and the Pd(II) compounds are all distorted- or square-planar. Each possesses structurally similar enediyne conformations and critical distances (3.75-3.88 A). The tetragonal Cu(II) species all exhibit Bergman cyclization temperatures between 140 and 150 degrees C in the solid state, while the square-planar Pd(II) analogues possess similar critical distances but cyclize at significantly higher temperatures (205-220 degrees C). In contrast, the Zn(II) derivatives show a marked halogen dependence, with X = Cl having the highest Bergman cyclization temperature, which is comparable to the Pd(II) square-planar set, while the ZnLX(2) compound with X = I shows the lowest Bergman cyclization temperature (144 degrees C), similar to the Cu(II) derivatives. Moreover, for the planar constructs, the R group has little influence on the cyclization temperatures; however, for the tetrahedral ZnLX(2) compounds, the steric influence of the R group plays a more significant role in the cyclization reaction coordinate by influencing the stability of the precyclized intermediate. This complex set of results is best interpreted by a combination of steric contributions and electronic interactions between the halogen through space (in the case of Zn(II)) and through bonds (in the case of Pd(II)) and the pi orbitals of the endiyne fragment. In contrast, for Cu(II) systems, the distorted square-planar geometry permits neither direct through space nor symmetry-allowed through bond communication between the orbital partners, and thus little variation in Bergman cyclization reactivity is observed.     

Ionic liquids as mobile phase additives in high-performance liquid chromatography with electrochemical detection: Application to the determination of heterocyclic aromatic amines in meat-based infant foods

The beneficial effects of several ionic liquids (ILs) as mobile phase additives in high-performance liquid chromatography with electrochemical detection for the determination of six heterocyclic aromatic amines (HAs) have been evaluated for first-time. The studied ionic liquids were 1-butyl-3-methylimidazolium tetrafluoroborate (BMIm-BF₄), 1-hexyl-3-methylimidazolium tetrafluoroborate (HMIm-BF₄) and 1-methyl-3-octylimidazolium tetrafluoroborate (MOIm-BF₄). Several chromatographic parameters have been evaluated in the presence or absence of ILs, or using ammonium acetate as the most common mobile phase additive, with three different C18 stationary phases. The effect of the acetonitrile content was also addressed. In general, best resolution, lower peak-widths (up to 72.1% lower) and lower retention factors are obtained when using ILs rather than ammonium acetate as mobile phase additives. The main improvement was obtained in the baseline noise, being 360% less noisy for BMIm-BF₄, 310% for HMIm-BF₄, and 227% for MOIm-BF₄, when compared to ammonium acetate at +1000 mV. Different chromatographic methods using the best conditions for each IL were also evaluated and compared. Finally, the best chromatographic conditions using 1 mM of BMIm-BF₄ as mobile phase additive, the Nova-Pak^® C18 column, 19% (v/v) of acetonitrile content in the mobile phase, and +1000 mV in the ECD, have been applied for the chromatographic analysis of six HAs contained in meat-based infant foods. The whole extraction method of meat-based infant foods using focused microwave-assisted extraction and solid-phase extraction has also been optimized. Extraction efficiencies up to 89% and detection limits ranged between 9.30 and 0.165 ng g⁻¹ have been obtained under optimized conditions.     

Research about transmission of the mechanical vibration done by machine-tools on the group of bones shoulder-neck-head

Different researches have shown that long–term exposure to whole–body vibration can induce different injuries like back pain, injuries of the different part of the body, disturbing the physical and intellectual activities. The resulted diseases could be occasional or could be for ever. Bearing in mind that vibration is applied on the hand or feet, the health rick can be assessed if the forces transmitted in the shoulder during vibration are known. To estimate the forces a biomechanical model has been developed in which the shoulder, neck and head are represented by rigid bodies. The bodies are connected by visco–elastic joint elements. The applied forces are resulted from experimental measurements. To assess the health risk the forces must be divised in two components, an ascendant one and a descendent one. (© 2008 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim)     

The Mechanical Stability for the Hand-Arm System

The present paper contains a study regarding importance stability in the mechanical systems, mechanical systems are emerging under mechanical vibrations action, it referring especially to the human hand–arm system. Mechanical systems stability is directly influenced of the dumper and the elasticity factors. (© 2008 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Quantification of p-cresol sulphate in human plasma by selected reaction monitoring

Chronic renal failure patients accumulate in the blood molecules that are normally excreted into the urine. p-Cresol Sulphate (pCS), the most representative retained toxin, shows a high level of toxicity. Therefore, its quantification could represent a prediction factor to determine the risk of endothelial dysfunction and cardiovascular complication and response to the haemodialysis treatment. The aim of this study was to evaluate the suitability of the multiple reaction monitoring (MRM) technique in order to improve the sensibility, the selectivity and the timing of pCS detection in a small amount of plasma. Deproteinized plasma of uremic patients was concentrated and dissolved in liquid chromatography (LC) mobile phase solution. pCS was quantified by LC coupled to tandem mass spectrometry (LC-MS/MS) on a triple-quadrupole mass spectrometer. Selective and sensitive detection of pCS was achieved by selecting the specific parent ion and monitoring two specific fragment ions. The MRM assay was carried out using the following transitions: m/z 187?→?80.00 and m/z 187?→?107.00. A good linearity was observed for each calibration curve. The intra-day and inter-day results showed a good precision and repeatability. The percentage recoveries indicate an optimal selectivity of the analytical method. The MRM assay to quantify pCS in a small amount of human plasma is rapid, highly sensitive, selective and with a good repeatability.     

Ring-opening polymerization of epoxides catalyzed by uranyl complexes: an experimental and theoretical study of the reaction mechanism

A comprehensive computational study on the ring-opening polymerization of propylene oxide catalyzed by uranyl chloride [UO(2)Cl(2)(THF)(3)] and the uranyl aryloxide [UO(2)(OAr)(2)(THF)(2)] (Ar = 2,6-(t)Bu(2)C(6)H(3)) is reported. The initiation and propagation steps have been probed and significant differences between the two catalysts discovered. The initiation step involving uranyl chloride is an intermolecular process because the orientation of the lone pair on the initiating chloride nucleophile is optimally oriented toward the empty σ*-antibonding orbital of the epoxide, which lowers the activation barrier by 22 kcal mol(-1). Thus, initiation is orbitally controlled. Propagation occurs through a dimeric species, and low-temperature fluorescence spectroscopy has been used to probe this experimentally. In contrast the initiation step for the uranyl aryloxide catalyzed mechanism is intramolecular because of the steric constraints imposed by the bulky substituents on the aryl ring and the fact that the lone pair on the nucleophile is able to approach the propylene oxide coordinated to the same uranium center. Thus, initiation is principally sterically controlled. Propagation is, however, intermolecular, and this can be traced to steric effects. Experimental evidence in the form of fluorescence spectroscopy and diffusion NMR has been used to explore the propagation process in solution.     

Effects of Heat Treatments on Various Characteristics of Ready-to-Eat Zucchini Purees Enriched with Anise or Fennel

Galactagogue herbs, also known as natural lactation adjuvants, are frequently used to stimulate breast milk production. Due to their antioxidant activity and phenolic content, anise (Pimpinella anisum L.) and fennel (Foeniculum vulgare L.) were chosen to increase the added value of zucchini (Cucurbita pepo L.) purees. At the same time, this work aimed to determine the influence of heat treatment on various characteristics of the final product. The phytochemical content, color parameters, and rheological and textural parameters of zucchini purees enriched with herbal aqueous extracts were determined after processing and after one week of storage (4 °C). In the case of antioxidant activity, samples registered a variation between 6.62 ± 1.71 and 38.32 ± 3.85 µM Trolox/g DW for the samples processed by steam convection. The total difference color parameter (ΔE) increased seven times after one week of storage compared to samples at T₀. Fennel and anise aqueous extracts helped improve the rheological behavior of zucchini samples both by steam and hot air convection. This study may serve as a springboard for future investigations and clinical trials into the scientific validity and safety of ready-to-eat foods with special destinations.     

Thermal expansion and optical length variation of sodium β-alumina along the c-axis

Thermal expansion and the optical length variation have been measured for a single crystal sodium β-alumina, along the c-axis. A laser interferometer has been used in the measurement. The measurements of the length and optical length variation do not indicate any anomalous behavior. The thermal expansion and thermooptic coefficients vary smoothly like the ionic conductivity and do not display any indication of cooperative effects.     

Convex and alpha-prestarlike subordination chains

In this paper we consider convex subordination chains (c.s.c.) and alpha-prestarlike subordination chains (α-p.s.c.) over (0,1] on the unit disc in the complex plane. We obtain sufficient conditions for a mapping f(z,t) to be an α-p.s.c. over (0,1], which generalize a well-known result of Ruscheweyh [St. Ruscheweyh, Convolutions in Geometric Function Theory, Les Presses de l'Université de Montreal, 1982]. We also obtain sufficient conditions for injectivity for nonanalytic mappings on the unit disc, and give certain examples of α-c.s.c. over (0,1] on the unit disc.