Synthetic,Optical and Theoretical Study of Alternating Ethylenedioxythiophene–Pyridine Oligomers: Evolution from Planar Conjugated to Helicoidal Structure towards a Chiral Configuration

A series of alternating 3,4‐ethylenedioxythiophene–alkynylpyridine oligomers (DA)_n with increased solubility are synthesized and their photophysical properties and nonlinear optical properties are investigated. Their quadratic polarizabilities are determined from hyper‐Rayleigh scattering experiments to obtain information on their conformations in solution. These chromophores, based on the alternation of electron‐rich (D) and electron‐deficient (A) moieties, exhibit optical properties that arise from the combination of dipolar and helicoidal features in the (DA)_n homologue series where n=1–4. The transition from dipolar conjugated planar structures (n=1, 2) to helicoidal structures (n=3, 4) is clearly evidenced by results from symmetry‐sensitive second‐order nonlinear optical experiments. This suggests an approach towards highly efficient chiral chromophores for second‐order nonlinear optics. Interestingly, this structural evolution also has significant impact on the photophysical properties: both absorption and fluorescence emission show bathochromic and hyperchromic shifts with increasing number of repeating units in the dipolar planar derivatives (n=1–2) but show saturation effects in the helicoidal structures (n=2–4). In addition, the helicoidal structures show sizeable two‐photon absorption at 700–750 nm (40–100 GM) for compounds lacking either electron‐donating or electron‐withdrawing substituents.     

Synthesis, fluorescence, and two-photon absorption of a series of elongated rodlike and banana-shaped quadrupolar fluorophores: a comprehensive study of structure-property relationships

An extensive series of push-push and pull-pull derivatives was prepared from the symmetrical functionalization of an ambivalent core with conjugated rods made from arylene-vinylene or arylene-ethynylene building blocks, bearing different acceptor or donor end-groups. Their absorption and photoluminescence, as well as their two-photon-absorption (TPA) properties in the near infrared (NIR) region, were systematically investigated to derive structure-property relationships and to lay the guidelines for both spectral tuning and amplification of molecular TPA in the target region. Whatever the nature of the core or of the connectors, push-push systems were found to be more efficient than pull-pull systems, and planarization of the core (fluorene versus biphenyl) always leads to an increase in the TPA cross sections. In contrast, increasing the conjugation length as well as replacement of a phenylene moiety by a thienylene moiety in the conjugated rods did not necessarily lead to increased TPA responses. The present study also demonstrated that the topology of the conjugated rods can dramatically influence the TPA properties. This is of particular interest in terms of molecular engineering for specific applications, as both TPA properties and photoluminescence characteristics can be considerably affected. Thus, it becomes possible to optimize the transparency/TPA and fluorescence/TPA efficiency trade-offs for optical limiting in the red-NIR region (700-900 nm) and for two-photon-excited fluorescence (TPEF) microscopy applications, respectively.     

Quenching of molecular fluorescence on the surface of monolayer-protected gold nanoparticles investigated using place exchange equilibria

The insertion of fluorescently labeled thiols into the protecting self-assembled monolayer on the surface of gold nanoparticles through place exchange reactions and the effects of this insertion on the photophysical properties of the fluorophores are investigated. Analysis of solution-phase fluorescence data using a dynamic equilibrium model yields the equilibrium constant for the place exchange equilibrium, as well as the relative fluorescence brightness of the fluorophores on the particle surface. In all cases we find a significant quenching of the fluorescence, and potential reasons for this quenching are discussed. In the case of these relatively small particles (4.5 nm diameter), the quenching appears to be mainly related to enhanced nonradiative deactivation pathways. The place exchange equilibrium constant reveals a reduced affinity of the fluorescently labeled thiols for insertion into the nonfluorescent alkylthiol monolayer (K(eq) approximately 0.2) compared to unlabeled alkylthiols.     

On the [2+2] cycloaddition of 2-aminothiazoles and dimethyl acetylenedicarboxylate. Experimental and computational evidence of a thermal disrotatory ring opening of fused cyclobutenes

The reaction of 2-(phenylamino)- and 2-(dimethylamino)thiazoles with dimethyl acetylenedicarboxylate led unexpectedly to dimethyl 6-(phenylamino)- and 6-(dimethylamino)-3,4-pyridinedicarboxylates. Those compounds reasonably result from a sequence of reactions initiated by a [2 + 2] cycloaddition of the alkyne to the formal C=C of the thiazole ring. These pyridines were obtained in nearly all the cases assayed as the exclusive reaction products under rather mild conditions and in fair to good yields. In contrast, the regioisomeric 2-amino-3,4-pyridinedicarboxylates, which would result from a [4 + 2] cycloaddition followed by sulfur extrusion, were only obtained in one particular case. The two reaction paths leading alternatively to both regioisomers were investigated computationally. The respective [2 + 2] and [4 + 2] cycloadducts were found to be formed stepwise from a common dipolar intermediate. Notably, the step following the [2 + 2] cycloaddition (i.e., the ring opening of the fused cyclobutene intermediate to give an all-cis 1,3-thiazepine) was found to take place in a disrotatory mode. Although geometric constraints and electronic factors may reduce the energy for the disrotation, the implication of the fused five-membered ring in the electronic reorganization leading to the 1,3-thiazepine is determinant. In this sense, this step could be regarded also as a thermally allowed six-electron five-center disrotatory electrocyclic ring opening. The proposed mechanism was experimentally supported by the isolation of several intermediates and other experimental facts.     

Modification of Polysaccharides Through Controlled/Living Radical Polymerization Grafting—Towards the Generation of High Performance Hybrids

This review covers the literature concerning the modification of polysaccharides through controlled radical polymerizations (NMP, ATRP and RAFT). The different routes to well‐defined polysaccharide‐based macromolecules (block and graft copolymers) and graft‐functionalized polysaccharide surfaces as well as the applications of these polysaccharide‐based hybrids are extensively discussed.

     

Poly(alkylene-H-phosphonate)s obtained by direct esterification and oxidation of hypophosphorous acid with ethylene glycol

This paper presents for the first time the synthesis of poly(alkylene-H-phosphonate)s by one-pot tandem reaction of hypophosphorous acid and ethylene glycol. Zirconium oxychloride was used as esterification catalyst, Nickel vinylphosphonate, Nickel sulfate, Nickel chloride hexahydrate were used as transfer hydrogenation catalyst. Nickel vinylphosphonate was synthesized in our laboratory and used for the first time as catalyst in this process. The compounds were characterized by ¹H-NMR, ¹³C-NMR and ³¹P-NMR spectroscopy. Molar masses were determined by SEC-MALLS technique and depend on the catalyst used. The obtained poly(alkylene-H-phosphonate)s have molar masses between 1.50 and 11.85 kDa, higher than those obtained by other methods mentioned in the literature.     

Qualitative analysis of a diffusive prey–predator model

In this work we examine a Lotka–Volterra model with diffusion describing the dynamics of multiple interacting prey and predator species. We show that the solution exists, and is unique, bounded, nonnegative, and globally defined. We also prove the non-existence of nonconstant steady state solutions if certain conditions are satisfied. For the particular case of two prey (e.g., engineered and native, respectively) and one common predator species, by performing a linear stability analysis about the initial native-dominant steady state, we determine under which conditions the engineered species invasion succeeds.     

Physicochemical characterization of acrylamide/bisacrylamide hydrogels and their application for the conservation of easel paintings

Acrylamide chemical gels have been synthesized to obtain systems with mechanic and hydrophilic properties suitable for the cleaning of works of art. The gel characteristics were tailored by changing the polymer percentage present in the final hydrogel formulation from 2 to 10% w/w. Two different hydrogels have been selected in this interval for an in depth characterization (i.e., S 4% w/w and H 6% w/w). Water retention properties of the gels along with the free water index have been determined by the combination of standard dehydration tests and differential scanning calorimetry (DSC) measurements. The gels' structure has been determined by scanning electron microscopy (SEM) and small angle X-ray scattering (SAXS). The water retention capacity of hydrogel, H, was also determined. Cleaning tests on easel painting replicas, performed with both hydrogels loaded with an aqueous detergent system, showed good results in the removal of a widely used synthetic adhesive and hence offered these gels as a real alternative to the widely applied physical gel methodology with the advantage of being a residue-free technique. A preliminary SAXS investigation confirms the persistence of the detergent system nanostructure inside the hydrogel.     

Engaging undergraduate students in computational chemistry research: A tutorial for new assistant professors

In this article, we provide advice and insights, based on our own experiences, for computational chemists who are beginning new tenure-track positions at primarily undergraduate institutions. Each of us followed different routes to obtain our tenure-track positions, but we all experienced similar challenges when getting started in our new position. In this article, we discuss our approaches to seven areas that we all found important for engaging undergraduate students in our computational chemistry research, including setting up computational resources, recruiting research students, training research students, designing student projects, managing the lab, mentoring students, and student conference participation.     

An LP estimate for Maxwell's equations with source term

In this Note we establish an interior L^p-type estimate for the solutions of Maxwell's equations with source term in a domain filled with two different materials separated by a $\text{C}{}^2$ interface. Due to the singularity of the dielectric permittivity, the usual elliptic estimates cannot be applied directly. A special curl–div decomposition is introduced for the electric field to reduce the problem to an elliptic equation in divergence form with discontinuous coefficients. The potential theory analysis and the jump condition lead to the L^p estimates which are superior to the straightforward Nash–Moser estimates. The reduction procedure is expected to be useful for numerical simulation. Such an estimate is crucial for solving nonlinear Maxwell's equations that arise for example in the modeling of nonlinear optics. To cite this article: G. Bao et al., C. R. Acad. Sci. Paris, Ser. I 337 (2003).