Modification of the photoluminescence anisotropy of semiconductor nanowires by coupling to surface plasmon polaritons

We demonstrate efficient modification of the polarized light emission from single semiconductor nanowires by coupling this emission to surface plasmon polaritons on a metal grating. The polarization anisotropy of the emitted photoluminescence from single nanowires is compared for wires deposited on silica, a flat gold film, and a shallow gold grating. By varying the orientation of the nanowire with respect to the grating grooves, the large intrinsic polarization anisotropy can be either suppressed or enhanced. This modification is interpreted by the appearance of an additional emission channel induced by surface plasmon polaritons and their conversion to p-polarized radiation at the grating.     

Production and Digestibility Studies of β-Galactosyl Xylitol Derivatives Using Heterogeneous Catalysts of LacA β-Galactosidase from Lactobacillus Plantarum WCFS1

The synthesis of β-galactosyl xylitol derivatives using immobilized LacA β-galactosidase from Lactobacillus plantarum WCFS1 is presented. These compounds have the potential to replace traditional sugars by their properties as sweetener and taking the advantages of a low digestibility. The enzyme was immobilized on different supports, obtaining immobilized preparations with different activity and stability. The immobilization on agarose-IDA-Zn-CHO in the presence of galactose allowed for the conserving of 78% of the offered activity. This preparation was 3.8 times more stable than soluble. Since the enzyme has polyhistidine tags, this support allowed the immobilization, purification and stabilization in one step. The immobilized preparation was used in synthesis obtaining two main products and a total of around 68 g/L of β-galactosyl xylitol derivatives and improving the synthesis/hydrolysis ratio by around 30% compared to that of the soluble enzyme. The catalyst was recycled 10 times, preserving an activity higher than 50%. The in vitro intestinal digestibility of the main β-galactosyl xylitol derivatives was lower than that of lactose, being around 6 and 15% for the galacto-xylitol derivatives compared to 55% of lactose after 120 min of digestion. The optimal amount immobilized constitutes a very useful tool to synthetize β-galactosyl xylitol derivatives since it can be used as a catalyst with high yield and being recycled for at least 10 more cycles.     

Covering and radius-covering arrays: Constructions and classification

The minimum number of rows in covering arrays (equivalently, surjective codes) and radius-covering arrays (equivalently, surjective codes with a radius) has been determined precisely only in special cases. In this paper, explicit constructions for numerous best known covering arrays (upper bounds) are found by a combination of combinatorial and computational methods. For radius-covering arrays, explicit constructions from covering codes are developed. Lower bounds are improved upon using connections to orthogonal arrays, partition matrices, and covering codes, and in specific cases by computation. Consequently for some parameter sets the minimum size of a covering array is determined precisely. For some of these, a complete classification of all inequivalent covering arrays is determined, again using computational techniques. Existence tables for up to 10 columns, up to 8 symbols, and all possible strengths are presented to report the best current lower and upper bounds, and classifications of inequivalent arrays.     

Nanostructures in calcia stabilized hafnia thin films observed by PAC as a function of temperature

The hyperfine quadrupole interaction at Hf sites in films and powders of 14 mol% CaO–HfO₂ and 20 mol% CaO–HfO₂ has been determined as a function of temperature. Results indicate the formation of a cubic solid solution and other microstructures assigned to the ?₁ (CaHf₄O₉) and ?₂ (Ca₆Hf₁₉O₄₄) phases. Dynamical effects on the electric field gradient reveal the existence of oxygen vacancies movements in the solid solution. The thermal behavior of the relaxation constant observed in films allowed the determination of activation energies of 0.54 eV and 0.70 eV for the 14 mol% and 20 mol% CaO doped hafnias, respectively. The influence of the microdomains and the stability of the cubic solid solution are discussed.     

First principles study on structural,electronic and optical properties of Ga1−xBxP ternary alloys (x = 0, 0.25, 0.5, 0.75 and 1)

The structural, electronic and optical properties of GaP, BP binary compounds and their ternary alloys Ga_1?xB_xP ($x=0.25$, 0.5 and 0.75) have been studied by full-potential linearized augmented plane wave (FP-LAPW) method within the framework of density functional theory (DFT) as implemented in WIEN2k package. Local density approximation (LDA) and generalized gradient approximation (GGA) as proposed by Perdew–Burke–Ernzerhof (PBE), Wu–Cohen (WC) and PBE for solid (PBESol) were used for treatment of exchange-correlation effect in calculations. Additionally, the Tran–Blaha modified Becke–Johnson (mBJ) potential was also employed for electronic and optical calculations due to that it gives very accurate band gap of solids. As B concentration increases, the lattice constant reduces and the energy band gap firstly decreases for small composition x and then it shows increasing trend until pure BP. Our results show that the indirect–direct band gap transition can be reached from $x=0.33$. The linear optical properties, such as reflectivity, absorption coefficient, refractive index and optical conductivity of binary compounds and ternary alloys were derived from their calculated complex dielectric function in wide energy range up to 30 eV, and the alloying effect on these properties was also analyzed in detail.     

Thermal behavior and evolution of the mineral phases of Brazilian red mud

This article studied the thermal behavior and the evolution of the crystalline phases with temperature of the red mud (bauxite tailing) from an aluminum industry at Maranhão, North-Northwestern Brazil. The experiments were carried out by Field Emission Scanning Electron Microscopy (FE-SEM), Simultaneous Thermal Analysis (TG–DSC), Optical Dilatometry up to 1623 K, and X-ray diffraction (XRD) of previously heated samples between 523 and 1523 K. The crystalline phases and the amorphous contents were quantified on raw and heated samples (at 1523 K) according to the Rietveld Quantitative Analysis (RQA) method. The data obtained showed that the raw red mud is composed by a mixture of seven different phases (hematite, goethite, sodalite, anatase, gibbsite, calcite, and amorphous). Finally in the interval of 1023–1523 K the following crystalline phases: hematite, nepheline, sodalite, anatase, perovskite, and pseudobrookite have been observed.     

In beam measurements of the F colouring curves for NaCl at and above room temperature

In beam measurements have been made of the F colouring curves in NaCl between 20 and 300°C. The first colouring stage has been empirically fitted by up to three exponential components which become smaller and faster with increasing temperature. A model is presented which gives physical significance to the fitting parameters.     

All-optical switching of the transmission of electromagnetic radiation through subwavelength apertures

Unprecedented optical control of the surface plasmon polariton assisted transmission of terahertz radiation through subwavelength apertures is rendered possible by carrier-induced changes to the dielectric properties of a semiconductor grating. Although the study presented is static, the extension of our approach to dynamic switching and tuning is deemed straightforward, opening the way for the realization of ultrafast surface plasmon based devices.     

Influence of velocity in nanoscale friction processes

Force-microscopy images of boric acid crystals were obtained experimentally and simulated with the use of a two-dimensional mechanical model. An analysis of the stick and slip movement of the microscope tip shows that the energy-dissipation mechanism is strongly influenced by the non-linear dynamics of the sliding system. The contributions of stick and viscous forces on the energy dissipation (or friction forces) are studied as a function of the relative scanning velocity. At low relative velocities, the stick forces are shown to be responsible for the energy dissipation. This energy is velocity-dependent, due to the coupling between the two degrees of freedom of the sliding system. As the scanning velocity increases the stick forces are damped; the viscous force is then predominant in the energy-dissipation process. Received: 30 October 2001 / Accepted: 17 May 2002 / Published online: 22 November 2002 RID="*" ID="*"Corresponding author. Fax: +55-21/2295-9397, E-mail: prioli@vdg.fis.puc-rio.br