PFGSE-NMR study of the self-diffusion of sucrose fatty acid monoesters in water

The micellization of pure monosubstituted sucrose fatty acid esters in water, namely sucrose octanoate, sucrose decanoate, sucrose laurate, sucrose dodec-5-cis-enoate, sucrose myristate, and sucrose palmitate, has been investigated by means of two NMR methods, pulsed field gradient spin-echo NMR (PFGSE-NMR), giving access to the self-diffusion coefficients of free molecules and micelles in solution, and the ERETIC method (electronic reference to access in vivo concentrations) for the measurement of concentrations by external calibration of a synthetic NMR signal. The early micellar regions and, when possible, the premicellar regions were investigated. By this method, we obtained the hydrodynamic radii of micelles, displaying a linear progression in relation to the chain length and an accurate determination of critical micellar concentration (CMC) for each sucrose ester. The effect of the regiochemistry of fatty chain grafting has been investigated, showing special behavior for 1'-O-sucrose palmitate.     

Optimized intermolecular potential for aromatic hydrocarbons based on anisotropic united atoms. III. Polyaromatic and naphthenoaromatic hydrocarbons

In this third article of the series, a new anisotropic united atoms (AUA) intermolecular potential parameter set has been proposed for the carbon force centers connecting the aromatic rings of polyaromatic hydrocarbons to predict thermodynamic properties using both the Gibbs ensemble and NPT Monte Carlo simulations. The model uses the same parameters as previous AUA models used for the aromatic CH force centers. The optimization procedure is based on the minimization of a dimensionless error criterion incorporating various thermodynamic data of naphthalene at 400 and 550 K. The new model has been evaluated on a series of polyaromatic and naphthenoaromatic hydrocarbons over a wide range of temperatures up to near-critical conditions. Vaporization enthalpy, liquid density, and normal boiling temperature are reproduced with good accuracy. The new potential parameters have also been tested successfully on toluene, 1,3,5-trimethylbenzene, styrene, m-xylene, n-hexylbenzene, and n-dodecylbenzene to demonstrate their transferability to alkylbenzenes.     

Validation of the density-functional based tight-binding approximation method for the calculation of reaction energies and other data

We investigated the performance of the approximative density functional method DFTB versus BLYP and G2 with respect to zero-point corrected reaction energies, vibrational frequencies, and geometry parameters for a set of 28 reactions and 22 representative molecules containing C, H, N, and O (DFTB--density-functional based tight-binding approximation). The DFTB reaction energies show a mean absolute deviation versus the G2 reference of 4.3 kcalmol only. The corresponding value for the vibrational frequencies amounts to 75 cm(-1) versus BLYP/cc-pVTZ. With very few exceptions bond lengths and angles are in excellent agreement with the results of higher-level methods.     

Determination of diethanolamine or <Emphasis Type="Italic">N</Emphasis>-methyldiethanolamine in high ammonium concentration matrices by capillary electrophoresis with indirect UV detection: application to the analysis of refinery process waters

Alkanolamines such as diethanolamine (DEA) and N-methyldiethanolamine (MDEA) are used in desulfurization processes in crude oil refineries. These compounds may be found in process waters following an accidental contamination. The analysis of alkanolamines in refinery process waters is very difficult due to the high ammonium concentration of the samples. This paper describes a method for the determination of DEA in high ammonium concentration refinery process waters by using capillary electrophoresis (CE) with indirect UV detection. The same method can be used for the determination of MDEA. Best results were achieved with a background electrolyte (BGE) comprising 10 mM histidine adjusted to pH 5.0 with acetic acid. The development of this electrolyte and the analytical performances are discussed. The quantification was performed by using internal standardization, by which triethanolamine (TEA) was used as internal standard. A matrix effect due to the high ammonium content has been highlighted and standard addition was therefore used. The developed method was characterized in terms of repeatability of migration times and corrected peak areas, linearity, and accuracy. Limits of detection (LODs) and quantification (LOQs) obtained were 0.2 and 0.7 ppm, respectively. The CE method was applied to the determination of DEA or MDEA in refinery process waters spiked with known amounts of analytes and it gave excellent results, since uncertainties obtained were 8 and 5%, respectively.     

Identifying acetylated lignin units in non-wood fibers using pyrolysis-gas chromatography/mass spectrometry

A series of non-wood plant fibers, namely kenaf, jute, sisal and abaca, have been analyzed upon pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) of the whole material. The pyrolysis products mainly arise from the carbohydrate and lignin moieties of the fibers. The lignin-derived phenols belonged to the p-hydroxyphenylpropanoid (H), guaiacylpropanoid (G) and syringylpropanoid (S) structures, and showed a high S/G ratio of between 2.0 and 5.4, the highest corresponding to kenaf. Among the lignin-derived phenols released, small amounts of sinapyl and coniferyl acetates (in both cis- and trans-forms) were identified for the first time upon Py-GC/MS of lignocellulosic materials. Acetylation of the sinapyl and coniferyl alcohols was at the gamma-position of the side chain. The release of these alcohols derived from intact acetylated lignin units upon pyrolysis seems to indicate that the native lignin in the fibers selected for this study is at least partially acetylated. Sinapyl (and coniferyl) acetates have recently been suggested to be authentic lignin precursors involved in the polymerization of lignin along with the normal sinapyl and coniferyl alcohols. Py-GC/MS will offer a convenient and rapid tool for analyzing naturally acetylated lignins, as well as to screen plant materials for the presence of acetylated units in lignin.     

Elucidation of the pore structure of SBA-2 using Monte Carlo simulation to interpret experimental data for the adsorption of light hydrocarbons

We have measured the adsorption of methane and ethane to high pressure on SBA-2, a structured mesoporous silica composed of spheres connected by narrow channels. The experimental data were analyzed by carrying out Monte Carlo simulations of adsorption in pore structure models of different complexity and then adjusting the parameters of the models to match the Monte Carlo results to the experimental data. We found that a model based on single-sized spherical cavities was inadequate and that it is necessary to explicitly account for the interconnecting channels. Further, we found that despite the basic regularity of the SBA-2 structure, it is necessary to allow for a distribution of the sizes of both the cavities and the channels. These size distributions were obtained by fitting the parameters of the model to the experimental adsorption data, revealing detailed structural information not previously known for this material. The channels were found to be 5-15 A in diameter, while the cavities were 40-50 A in diameter. There is some evidence that the distribution of channel sizes leads to a percolation effect whereby the pore structure is not equally accessible to all adsorptives.     

Simple and rapid micellar electrokinetic capillary chromatographic method for simultaneous determination of four antiepileptics in human serum

A very rapid and simple MEKC method was developed for the simultaneous determination of four antiepileptic drugs, ethosuximide (Etho), primidone (Pri), phenytoin (Pht) and carbamazepine (Cbz) in human serum. Sample analysis required only 100 microL of human serum which only needed to be centrifuged, decanted and combined with the running buffer [5.3 mM Na(2)HPO(4)/3.2 mM borax buffer (pH 9.5) containing 55 mM SDS and 3.5% (v/v) acetone]. The analysis was performed in only 10 min into fused-silica capillaries (57 cm total length with 50 microm i.d. and 50 cm to the detector) using the MEKC methodology with diode-array detection at 220 nm. The calibration graphs were established for ethoximide, primidone, phenytoin and carbamazepine between 0 and 20 mg/L. Recoveries were between 85 and 87%. The simplicity of the proposed methodology makes it suitable for routine clinical use, especially for epileptic patients on polytherapy.     

Microwave-assisted solid-phase synthesis of peptoids

Microwave irradiation reduces the reaction time for the solid-phase synthesis of peptoids. Under these conditions, coupling of each residue requires only 1 min. The purity and yields of peptoids synthesized in this way are as good as or better than those achieved using standard methods. [reaction: see text]     

Quantum chemistry with an attached processor

The Floating Point Systems, Inc. Model 164 Attached Processor (FPS-164) is a high-speed, pipelined, parallel processor designed for large-scale scientific computation. Benchmark studies of operations common in quantum chemistry codes are discussed and the performance of the FPS-164 is compared with other commonly available computers. A complete system of electronic structure codes has been implemented on the FPS-164 using the Fortran-77 cross-compiler and calls to optimized vector and matrix routines. The conversion of a generalized valence bond (GVB ) code illustrates the strategy adopted to adapt Fortran codes to the FPS-164. A typical production example, a large scale (GVB ) and configuration interaction calculation on the vinyl radical, shows a net throughput equivalent to nearly nine VAX 11/780 computers.