Penetration and interactions of the antimicrobial peptide, microcin J25, into uncharged phospholipid monolayers

Microcin J25 forms stable monolayers at the air-water interface showing a collapse at a surface pressure of 5 mN/m, 220 mV of surface potential, and 6 fV per squared centimeter of surface potential per unit of molecular surface density. The adsorption of microcin J25 from the subphase at clean interfaces leads to a rise of 10 mN/m in surface pressure and a surface potential of 220 mV. From these data microcin appears to be a poor surfactant per se. Nevertheless, the interaction with the lipid monolayer further increase the stability of the peptide at the interface depending on the mode in which the monolayer is formed. Spreading with egg PC leads to nonideal mixing up to 7 mN/m, with hyperpolarization and expansion of components at the interface, with a small excess free energy of mixing caused by favorable contributions to entropy due to molecular area expansion compensating for the unfavorable enthalpy changes arising from repulsive dipolar interactions. Above 7 mN/m microcin is squeezed out, leaving a film of pure phospholipid. Nevertheless, the presence of lipid at 10 and 20 mN/m stabilize further microcin at the interface and adsorption from the subphase proceeds up to 30 mN/m, equivalent to surface pressure in bilayers.     

NO Release from trans-[Ru(NH3)4L(NO)]3+ Complexes Upon Reduction (L = 1-Methylimidazole or Benzoimidazole)

The synthesis, characterization and reactivity of trans-[Ru(NH₃)₄(L)NO](PF₆)₃(L = benzoimidazole or 1-methylimidazole in trans position to NO) are presented. ¹H-n.m.r. spectroscopy data indicate that the benzoimidazole and 1-methylimidazole ligands are coordinated to Ru^II through carbon and nitrogen, respectively. The nitrosyl stretching frequencies [(NO) > 1900 cm^–1] suggest that the coordinated nitrosyl has substantial NO⁺ character. The complexes undergo a single-electron reduction (E ⁰–0.245 versus NHE), which involves the coordinated nitrosyl. Dissociation of NO in the reduced species is facilitated by the 1-methylimidazole ligand, which is not observed for the benzoimidazole species. The complex with 1-methylimidazole does not suffer hydroxide attack on the NO⁺, at least at pH values lower than 11.     

Filipin orientation revealed by linear dichroism. Implication for a model of action

The organization of the polyene antibiotic filipin in membranes containing cholesterol is a controversial matter of debate. Two contradictory models exist, one suggesting a parallel and the other perpendicular organization of filipin with respect to the plane of the membrane. UV-vis linear dichroism, ATR-FTIR, and fluorescence anisotropy decay techniques were combined to study the orientation of filipin in model systems of membranes composed of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) or 1,2-palmitoyl-sn-glycero-3-phosphocholine (DPPC) with and without cholesterol. Filipin's orientation is determined by the presence/absence of cholesterol when it is inserted in gel crystalline phase model membranes. When cholesterol (33%) is present in DPPC bilayers, filipin stands perpendicular to the membrane surface as expected in "pore-forming" models. At variance, absence of cholesterol leaves filipin in an essentially random organization in the lipidic matrix. In liquid crystalline phase bilayers (POPC) filipin's orientation is perpendicular to the membrane surface even in absence of cholesterol. Thus filipin's activity/organization depends not only on cholesterol presence but also in the lipid phase domain it is inserted in. These findings were combined with spectroscopy and microscopy data in the literature, solving controversial matters of debate.     

Counterions in poly(allylamine hydrochloride) and poly(styrene sulfonate) layer-by-layer films

The amount of counterions in layer-by-layer (LBL) films of poly(allylamine hydrochloride) (PAH) and poly(styrene sulfonate) (PSS) has been determined with X-ray photoelectron spectroscopy (XPS) for films prepared from solutions with various NaCl concentrations. Sodium and chloride counterions are present in LBL films produced from salt solutions, which are located at the surface and in the bulk of the films. The percentage of bulk counterions increases with the ionic strength of the polyelectrolyte before reaching a constant value. The bulk sodium/sulfur percentage ratios tend to 0.8 for samples washed with pure water and for samples washed with NaCl aqueous solutions, while the bulk chlorine/nitrogen percentage ratios tend to 0.5 for the same samples. The ratio between the percentages of polyelectrolyte ionic groups lies close to unity for all samples, indicating that counterions do not contribute to charge compensation in the polyelectrolyte during the adsorption process. The presence of counterions in LBL films is explained by Manning condensation near the polyelectrolyte ionic groups, leading to inter-polyelectrolyte ionic bondings via ionic networks. It is believed that condensation leads to the formation of NaCl crystallites in these LBL films, which was confirmed by X-ray diffraction measurements.     

Synthesis of 4‐(trihalomethyl)dipyrimidin‐2‐ylamines from β‐alkoxy‐α,β‐unsaturated trihalomethyl ketones

The synthesis of a novel series of twelve 4‐(trihalomethyl)dipyrimidin‐2‐ylamines, from the cyclo‐condensation reaction of 4‐(trichloromethyl)‐2‐guanidinopyrimidine, with β‐alkoxyvinyl trihalomethyl ketones, of general formula: X₃C‐C(O)‐C(R²)=C(R¹)‐OR, where: X = F, Cl; R = Me, Et, ‐(CH₂)₂‐, ‐(CH₂)₃‐; R¹ = H, Me; R² = H, Me, ‐(CH₂)₂‐, ‐(CH₂)₃‐, is reported. The reactions were carried out in acetonitrile under reflux for 16 hours, leading to the dipyrimidin‐2‐ylamines in 65‐90% yield. Depending on the substituents of the vinyl ketone, tetrahydropyrimidines or aromatic pyrimidine rings were obtained from the cyclization reaction. When X = Cl, elimination of the trichloromethyl group was observed during the cyclization step. The structure of 4‐(trihalomethyl)dipyrimidin‐2‐ylamines was studied in detail by ¹H‐, ¹³C‐ and 2D‐nmr spectroscopy.     

Second harmonic generation in polymers containing a new azo chromophore based on phenylnitrobenzoxazole

The synthesis of the new chromophores 2‐{4‐[4‐(N,N‐dihydroxyethylamino)‐phenylazo]‐phenyl}‐6‐nitrobenzoxazole ( 1 ) and 4‐[4‐(N,N‐dihydroxyethylamino)phenylazo]‐benzoic acid ( 2 ) is described. Three homopolymers obtained by the polycondensation of 1 with propyloxy‐terephthalic acid and 1 and 2 with 2,4‐tolylenediisocianate as well as two copolymers obtained by polycondensation of appropriate mixtures of chromophores 1 and 2 with 2,4‐tolylene‐diisocianate were prepared and characterized. All as‐prepared polymers but one (homopolyurethane of 1 ) were amorphous and exhibited good optical clarity, good thermal stability above the glass transition, and solubility in organic solvents. The second‐order nonlinear optical behavior of the amorphous polymers was investigated on spin‐coated corona‐poled films through second harmonic generation (SHG) experiments at 1064 nm. At this wavelength, resonance‐enhanced values of the SHG coefficient d₃₃ were found in the range between 6 and 34 pm/V where higher values were observed for polymers with a higher molar content of 1 . © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1468–1475, 2002     

Fragmentation studies on monensin A and B by accurate-mass electrospray tandem mass spectrometry

Monensin A and B were studied by electrospray ionisation tandem mass spectrometry (ESI-MS/MS) and the fragment ions were confirmed by accurate-mass measurements. Analyses were performed on both a quadrupole time-of-flight (QTOF) and a Fourier-transform ion cyclotron resonance (FTICR) mass spectrometer. The analysis revealed that fragment ions were produced by Grob-Wharton fragmentations and pericyclic rearrangements in addition to various simple neutral losses. A study of the protonated and sodiated sodium salt revealed different fragmentation pathways for these species, thus complementary structural information could be gained. A complete fragmentation pathway of monensin A and B protonated sodium salt [(M-H+Na)+H])+) and sodiated sodium salt [(M-H+Na)+Na](+) is proposed. MS(3) analysis confirmed the separate fragmentation pathways.     

Anaerobic reduction of a sulfonated azo dye, Congo Red, by sulfate-reducing bacteria

The capacity for anaerobic decolorization of a sulfonated azo dye, Congo Red, by a strain of a sulfate-reducing bacterium was evaluated. After optimizing the growth rate of the bacteria on a simple carbon source and terminal electron acceptor pair, lactate and sulfate, respectively, the effect of the dye concentration on their growth rate was analyzed. The decolorization rate was affected by the dye concentration in the growth medium. The azo-bond cleavage mechanism of reductive decolorization with the formation of benzidine was consistent with the results, as this metabolite was identified by high-performance liquid chromatography. Several fractions of the culture medium, including lysed cell extracts, were examined for the capacity to reduce the azo dye. This reduction capacity was found in the culture medium in which the cells had previously grown. The results showed that the mechanism of reductive decolorization of this sulfonated azo dye was extracellular and nonenzymatic, consistent with the production of sulfide anion by the microorganisms while growing on lactate and sulfate. The sulfide anions were the cause of the reduction leading to the disappearance of color in the medium. To increase the rate of decolorization, the presence of ferrous ion was also necessary together with the lactate and sulfate substrates.     

Influence of inhibitory compounds and minor sugars on xylitol production by <Emphasis Type="Italic">Debaryomyces hansenii</Emphasis>

To obtain in-depth information on the overall metabolic behavior of the new good xylitol producer Debaryomyces hansenii UFV-170, batch bioconversions were carried out using semisynthetic media with compositions simulating those of typical acidic hemicellulose hydrolysates of sugarcane bagasse. For this purpose, we used media containing glucose (4.3–6.5 g/L), xylose (60.1–92.1 g/L), or arabinose (5.9–9.2 g/L), or binary or ternary mixtures of them in either the presence or absence of typical inhibitors of acidic hydrolysates, such as furfural (1.0–5.0 g/L), hydroxymethylfurfural (0.01–0.30 g/L), acetic acid (0.5–3.0 g/L), and vanillin (0.5–3.0 g/L). D. hansenii exhibited a good tolerance to high sugar concentrations as well as to the presence of inhibiting compounds in the fermentation media. It was able to produce xylitol only from xylose, arabitol from arabinose, and no glucitol from glucose. Arabinose metabolization was incomplete, while ethanol was mainly produced from glucose and, to a lesser less extent, from xylose and arabinose. The results suggest potential application of this strain in xyloseto-xylitol bioconversion from complex xylose media from lignocellulosic materials.     

Flow injection system with gas diffusion for the sequential determination of total nitrogen and phosphorus in vegetables

 A flow injection system was developed for the sequential determination of total nitrogen and phosphorus in digests of vegetables using potentiometric and spectrophotometric detection systems, respectively. A tubular ammonium selective electrode with a sensor system composed of nonactin/monactin in tris(2-ethylhexyl) phosphate was used. The selectivity limitations of this electrode were overcome by the inclusion of a gas-diffusion unit in the system that separated ammonium from the rest of the sample matrix and allowed the determination of total nitrogen and phosphorus by the partition of the sample plug between two streams. The results obtained with the developed FIA system were in good agreement with those of the reference methods. Sampling rates from 40 to 60 samples per hour and relative standard deviations below 3.5% were achieved. Received: 17 October 1996/Revised: 21 November 1996/Accepted: 27 November 1996