Neutral and dianionic iron and ruthenium 1,4-diphosphabutadiene complexes

Reaction of a tetraphenyl-1,2-diphosphinyl dianion with [FeCl2(THF)1.5] or [Ru(COD)(acac)2] yields dianionic complexes which further react with Ph3SnCl to afford the corresponding bis(1,4-diphosphabutadiene) complexes.     

Study of active naphtodianthrone St John's Wort compounds by electrospray ionization Fourier transform ion cyclotron resonance and multi‐stage mass spectrometry in sustained off‐resonance irradiation collision‐induced dissociation and infrared multiphoton dissociation modes

Five well‐known active naphtodianthrone constituents of Hypericum perforatum (St John's Wort) extracts have been investigated by electrospray ionization Fourier transform ion cyclotron resonance mass spectrometry (ESI‐FTICRMS) and ESI‐FTICRMSⁿ. The studied compounds were hypericin, pseudohypericin, protohypericin, protopseudohypericin (biosynthetic precursors of the two former compounds, respectively) and isopseudohypericin (alkaline degradation product of pseudohypericin). Dissociation mass spectrometry measurements performed on the [M–H]^? ion presented a variable efficiency as a function of the used activation mode. Sustained off‐resonance irradiation collision‐induced dissociation (SORI–CID) only led to a restricted number of fragment ions. In contrast, IRMPD ensured the detection of numerous product ions. Ions detected in ESI‐FTICRMS and ESI‐FTICRMSⁿ experiments were measured with a very high mass accuracy (typically mass error is lower than 0.5 mDa at m/z close to 500) that allowed unambiguous formulae to be assigned to each signal observed in a mass spectrum. In spite of similar structures, specific fragmentation patterns were observed for the different compounds investigated. This study may be useful in the future to characterize in natural extracts these compounds (or derivatives of these compounds) by liquid chromatography/tandem mass spectrometry (LC/MS/MS) experiments by considering the MS/MS transitions highlighted in this paper. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis of imidazolium and pyridinium-based ionic liquids and application of 1-alkyl-3-methylimidazolium salts as pre-catalysts for the benzoin condensation using solvent-free and microwave activation

An efficient one-pot procedure for the synthesis of ionic liquids based on nitrogen-containing heterocycles, imidazolium or pyridinium under ‘green chemistry’ conditions has been described. Imidazolium salts and DBU have been found to catalyze efficiently the benzoin condensation giving good yields within very short reaction time using solvent-free microwave activation conditions.     

Development of an integrated optical system for warpage and hermeticity test of microdisplay

We have developed an integrated optical system to measure the warpage of a microdisplay product at post-packaging die-attach temperature and to test its hermeticity after manufacturing. This system is constructed based on the principle of Twyman/Green (T/G) interferometry and Newton interferometry. T/G interferometry is used to characterize warpage of the microdisplay's base-plate, while Newton interferometry is used to characterize the gap variance between face-plate and base-plate of the microdisplay. With these measurements, deformation and shape of the microdisplay can be comprehensively determined during its manufacturing process, which is critical for its quality test and reliability evaluation. Delicate mechanical system was designed to facilitate the optics integration and alignment. To evaluate the performance of the optical system itself, warpage of a sample was re-measured with Tailor–Hobson profilometer whose resolution is 10 nm, the results from these two testing systems agree well with each other. Some application examples of the integrated testing system were presented to verify its work efficiency.     

From Lignin‐derived Aromatic Compounds to Novel Biobased Polymers

Nowadays, the synthesis of (semi)aromatic polymers from lignin derivatives is of major interest, as aromatic compounds are key intermediates in the manufacture of polymers and lignin is the main source of aromatic biobased substrates. Phenols with a variety of chemical structures can be obtained from lignin deconstruction; among them, vanillin and ferulic acid are the main ones. Depending on the phenol substrates, different chemical modifications and polymerization pathways are developed, leading to (semi)aromatic polymers covering a wide range of thermomechanical properties. This review discusses the synthesis and properties of thermosets (vinyl ester resins, cyanate ester, epoxy, and benzoxazine resins) and thermoplastic polymers (polyesters, polyanhydrides, Schiff base polymers, polyacetals, polyoxalates, polycarbonates, acrylate polymers) prepared from vanillin, ferulic acid, guaiacol, syringaldehyde, or 4‐hydroxybenzoic acid.

     

Total microcystins analysis in water using laser diode thermal desorption-atmospheric pressure chemical ionization-tandem mass spectrometry

A new approach for the analysis of the cyanobacterial microcystins (MCs) in environmental water matrices has been developed. It offers a cost efficient alternative method for the fast quantification of total MCs using mass spectrometry. This approach permits the quantification of total MCs concentrations without requiring any derivatization or the use of a suite of MCs standards. The oxidation product 2-methyl-3-methoxy-4-phenylbutyric acid (MMPB) was formed through a Lemieux oxidation and represented the total concentration of free and bound MCs in water samples. MMPB was analyzed using laser diode thermal desorption-atmospheric pressure chemical ionization coupled to tandem mass spectrometry (LDTD-APCI-MS/MS). LDTD is a robust and reliable sample introduction method with ultra-fast analysis time (<15 s sample⁻¹). Several oxidation and LDTD parameters were optimized to improve recoveries and signal intensity. MCs oxidation recovery yield was 103%, showing a complete reaction. Internal calibration with standard addition was achieved with the use of 4-phenylbutyric acid (4-PB) as internal standard and showed good linearity (R² > 0.999). Limits of detection and quantification were 0.2 and 0.9 μg L⁻¹, respectively. These values are comparable with the WHO (World Health Organization) guideline of 1 μg L⁻¹ for total microcystin-LR congener in drinking water. Accuracy and interday/intraday variation coefficients were below 15%. Matrix effect was determined with a recovery of 91%, showing no significant signal suppression. This work demonstrates the use of the LDTD-APCI-MS/MS interface for the screening, detection and quantification of total MCs in complex environmental matrices.     

Tracing sewage water by 15N in a mangrove ecosystem to test its bioremediation ability

Mangrove forests could be a simple and effective alternative to conventional sewage treatment, particularly for island communities given its low cost and low maintenance. Due to their high adaptation capacity, these plants are able to tolerate and bioremediate the high levels of nutrients and pollutants found in sewage water. This solution could be applied to small tropical islands with high population density such as Mayotte in the Indian Ocean. This paper reports on a trial by stable isotopic (15)N tracing of such a bioremediation process on pre-treated wastewater near the village of Malamani, in the middle of the large coastal mangrove in the bay near Chirongui. The first results show a boost in the mangrove growth, but a longer period of observation is needed to confirm the beneficial effects, and also to clarify the role of the local crab population, whose engineering activities play an important part in the ecosystem. The exact denitrification process is not yet understood, and the mass balance equation also reveals loss of nitrogen-containing compounds, which needs to be analyzed more closely.     

Bubbles navigating through networks of microchannels

This paper describes the behavior of bubbles suspended in a carrier liquid and moving within microfluidic networks of different connectivities. A single-phase continuum fluid, when flowing in a network of channels, partitions itself among all possible paths connecting the inlet and outlet. The flow rates along different paths are determined by the interaction between the fluid and the global structure of the network. That is, the distribution of flows depends on the fluidic resistances of all channels of the network. The movement of bubbles of gas, or droplets of liquid, suspended in a liquid can be quite different from the movement of a single-phase liquid, especially when they have sizes slightly larger than the channels, so that the bubbles (or droplets) contribute to the fluidic resistance of a channel when they are transiting it. This paper examines bubbles in this size range; in the size range examined, the bubbles are discrete and do not divide at junctions. As a consequence, a single bubble traverses only one of the possible paths through the network, and makes a sequence of binary choices ("left" or "right") at each branching intersection it encounters. We designed networks so that, at each junction, a bubble enters the channel into which the volumetric flow rate of the carrier liquid is highest. When there is only a single bubble inside a network at a time, the path taken by the bubble is, counter-intuitively, not necessarily the shortest or the fastest connecting the inlet and outlet. When a small number of bubbles move simultaneously through a network, they interact with one another by modifying fluidic resistances and flows in a time dependent manner; such groups of bubbles show very complex behaviors. When a large number of bubbles (sufficiently large that the volume of the bubbles occupies a significant fraction of the volume of the network) flow simultaneously through a network, however, the collective behavior of bubbles-the fluxes of bubbles through different paths of the network-can resemble the distribution of flows of a single-phase fluid.