Heterogeneous distribution of radiocesium in aerosols, soil and particulate matters emitted by the Fukushima Daiichi Nuclear Power Plant accident: retention of micro-scale heterogeneity during the migration of radiocesium from the air into ground and river systems

We analyzed ¹³⁷Cs in aerosols, rock, soil and river suspended sediment collected after the Fukushima Daiichi Nuclear Power Plant (FDNPP) accident. Based on the results, we discuss the post-event behavior and transportation of radiocesium in the environment from the air into ground and river systems. First, radionuclides were emitted from the FDNPP as airborne ‘hot’ particles, which contained water-soluble fractions of radiocesium. Radiocesium was still present in a water-soluble fraction after deposition on the ground. Subsequent interaction of the ‘hot’ particles with water (e.g. rainfall) dissolved and strongly fixed the radiocesium on rock and soil particles, thus changing the radiocesium into insoluble forms. The distribution of ‘hot spots’ was possibly controlled by the initial position of deposition on the ground. Consequently, ‘hot spots’ were studded on the rock surface rather than being uniformly distributed. The distribution of radiocesium in river suspended particles was not homogeneous during water transportation, reflecting the heterogeneity of radiocesium in rock and soil. Leaching experiments demonstrated that radiocesium in rock, soil and river suspended sediment was fairly insoluble, showing that the adsorption reaction is irreversible. The micro-scale heterogeneous distribution of radiocesium in aerosols, soil and suspended particles was due to the presence of ‘hot’ particles in aerosols. Dissolution of radiocesium in the ‘hot’ particles in the aerosols and subsequent irreversible adsorption onto the soil particle complex are responsible for the preservation of the heterogeneity both in soil and in river suspended particles.     

Spontaneous ignition temperature for the compacted mixture of Ni–Al system: Experiment,theory, and comparisons

Spontaneous ignition of compacted mixture has been examined not only experimentally but also theoretically, relevant to materials synthesis for Ni–Al system. Spontaneous ignition temperature, determined from the inflection-point of the temporal variation of surface temperature, is found to decrease at first, reach the minimum, and then increase gradually, with increasing size ratio, being defined as the ratio of compact and particle diameters and reported to be useful in correlating experimental results. The lowest temperature observed is as low as that, more than 200 K below the melting point 934 K of Al, at the size ratio of c.a. 700. While its decrease is attributed to the increase in the particle surface per unit spatial volume of compacted mixture, as reported in the literature, its increase found in the course of the present study can fairly be correlated to an enhancement of heat loss from each particle in the compacted mixture, by conducting a theoretical consideration. As for the dependence of spontaneous ignition temperature on the mixture ratio, a shifting occurs from a decreasing trend with increasing mixture ratio at small size ratios, less than about 700, to an insensitive trend to the mixture ratio, had not been reported in the literature. In addition, a fair degree of agreement, shown in experimental comparisons with theoretical results, indicates that the present formulation has captured the essential features of the spontaneous ignition of compacted mixture, especially for size ratios with large values. Since this kind of particle size effects, relevant to the spontaneous ignition of the compacted mixtures, has not been captured in the previous studies, its elucidation can be considered not only notable but also useful, in manipulating combustion process in materials synthesis, especially, in choosing a specific condition for the lowest spontaneous ignition temperature by varying the size ratio.     

N‐glycosylation approach to glucose‐functionalized diamine and its use for protection‐free synthesis of polyurea bearing glucoside pendant

A glucose‐functionalized diamine was prepared and used as a new monomer for polyurea synthesis. The diamine was prepared by N‐glycosylation of 1,6‐hexamethylenediamine with D ‐glucose. Upon adding diisocyanates to the diamine, isocyanate reacted selectively with the amino groups, not with the hydroxyl groups of the glucose‐derived structure, to give the corresponding polyureas. The polyureas exhibited highly hydrophilic nature due to the presence of the glucose‐derived side chain. A ternary system consisting of the glucose‐functionalized diamine, piperazine, and diisocyanate gave the corresponding polyureas, where content of the glucose‐derived moiety was tunable by feed ratio between the diamine and piperazine. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis of β-hydroxyphosphonates by iron-catalyzed oxidative addition of phosphonyl radicals to alkenes

Phosphorohydrazidates have been shown to work as radical precursors by iron-catalyzed aerobic oxidation to generate corresponding phosphonyl radicals. Generated radicals cause intermolecular addition to various alkenes in the presence of molecular oxygen to give β-hydroxyphosphonate compounds in good yield.     

Precise synthesis of a series of poly(4‐n‐alkylstyrene)s and their glass transition temperatures

Poly(4‐n‐alkylstyrene)s with six kinds of n‐alkyl groups such as methyl, ethyl, propyl, butyl, hexyl, and octyl groups covering wide molecular weight range from around 5 k to over 100 k were precisely synthesized by living anionic polymerizations. It was confirmed that all the polymers obtained have narrow molecular weight distribution, that is, M_w/M_n is all less than 1.1, by SEC. T_gs of all the polymers were estimated by DSC measurements and it turned out to be clear that their molecular weight dependence was well described by the Fox–Flory equations. Furthermore, it is evident that T_g monotonically decreases as a number of carbon atoms of n‐alkyl group is increased, though T_g values are all 20 K or more higher than those reported previously for the same polymer series. This is because backbone mobility increases by introducing longer n‐alkyl side groups with high mobility, while T_g difference in between this work and the previous one may due to the experimental conditions and also to the molecular weight range adopted. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 757–763     

Alkyl side chain length dependent compatibility of poly(4‐n‐alkylstyrene)s and 1,4‐rich polyisoprene blends

We investigated the compatibility of blends of 1,4‐rich polyisoprene (1,4‐PI) and poly(4‐n‐alkylstyrene)s with six kinds of n‐alkyl side groups, that is, methyl, ethyl, propyl, butyl, hexyl, and octyl focusing on carbon number of alkyl groups. Poly(4‐methylstyrene)/1,4‐PI blend was turned out to be immiscible at all temperature range adopted in this work and poly(4‐ethylstyrene)/1,4‐PI blend revealed UCST type phase behavior, while the others were found to be compatible. The phase diagrams of poly(4‐ethylstyrene)/1,4‐PI blends were obtained by optical microscopy, and the temperature dependence of the Flory‐Huggins interaction parameter χ has been estimated to be χ = ?0.036 + 24/T by applying lattice theory, where T is the absolute temperature. From this relationship χ value at room temperature (298 K) was calculated to be 0.045, the value is reasonably low for miscible polymers system. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55 , 1791–1797     

Solution‐processable colorless polyimides derived from hydrogenated pyromellitic dianhydride with controlled steric structure

This work presents novel colorless polyimides (PIs) derived from 1R,2S,4S,5R‐cyclohexanetetracarboxylic dianhydride (H″‐PMDA). Isomer effects were also discussed by comparing with PI systems derived from conventional hydrogenated pyromellitic dianhydride, that is, 1S,2R,4S,5R‐cyclohexanetetracarboxylic dianhydride (H‐PMDA). H″‐PMDA was much more reactive with various diamines than H‐PMDA, and the former led to PI precursors with much higher molecular weights. The results can be explained from the quite different steric structures of these isomers. The thermally imidized H″‐PMDA‐based films were colorless regardless of diamines because of inhibited charge‐transfer interaction. In particular, the H″‐PMDA/4,4′‐oxydianiline system simultaneously achieved a very high T_g exceeding 300 °C, high toughness (elongation at break > 70%), and good solution processability. In contrast, the H‐PMDA‐based counterparts were essentially insoluble. The outstanding solubility of the former probably results from disturbed chain stacking by its nonplanar steric structure. An advantage of chemical imidization process is also proposed. In some cases, a copolymerization approach with an aromatic tetracarboxylic dianhydride was effective to improve the thermal expansion property. The results suggest that the H″‐PMDA‐based PI systems can be promising candidates for novel high‐temperature plastic substrate materials in electronic paper displays. A potential application as optical compensation film materials in liquid crystal displays (LCD) is also proposed in this work. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Polyion complex stabilized palladium nanoparticles for Suzuki and Heck reaction in water

Palladium nanoparticles stabilized by a polyion complex composed of poly{4-chloromethylstyrene-co-(4-vinylbenzyl) tributylammonium chloride} and poly(acrylic acid) were easily recovered by filtration after pH treatment. The polyion complex stabilized palladium nanoparticles have high catalytic activity for the Suzuki and Heck reactions in water.     

Centroaffine minimal surfaces whose centroaffine curvature and Pick function are constants

We classify centroaffine minimal surfaces whose centroaffine curvature and Pick function are constants locally, which also gives classification of centroaffine minimal surfaces whose centroaffine curvature and generalized Pick function are constants locally.