Formation of a new crystalline silicate structure by grafting dialkoxysilyl groups on layered octosilicate

Dialkoxydichlorosilanes ((RO)2SiCl2, R = alkyl) react almost completely with interlayer silanol groups in a layered silicate octosilicate to create a new crystalline silicate structure consisting of new five-membered rings arranged regularly on both sides of the silicate layers. The introduction of dialkoxysilyl groups to the interlamellar region of layered silicates with regular reaction sites provides a new methodology for the design and construction of novel crystalline silicate frameworks by a soft chemical route.     

Synthesis of enantiopure 1,2-diamine attached to cross-linked polystyrene and its application to an insoluble catalyst for asymmetric hydrogenation

A novel enantiopure 1,2-diamine (5) having two phenolic hydroxy groups was attached into chloromethylated polystyrene through benzyl ether linkage, which was used as a chiral ligand of the catalyst in asymmetric hydrogenation of acetophenone.     

Subsecond luminescence intensity fluctuations of single CdSe quantum dots

Photoluminescence (PL) intermittency characteristics are examined for single quantum dots (QDs) in a CdSe QD sample synthesized at a slow rate at 75 degrees C. Although the PL quantum efficiency was relatively low ( approximately 0.25), we noticed that the PL intensity of single CdSe QDs fluctuated on a subsecond time scale with short-lived "on" and "off" states. The subsecond PL intensity fluctuations of CdSe QDs are different from "on" and "off" PL blinking generally observed for QDs fluctuating on a millisecond to minute time scale. We characterized single QDs by identifying polarized excitations, topographic imaging using atomic force microscopy (AFM), and transmission electron microscopy (TEM). From analysis of the PL intensity trajectories from >100 single CdSe QDs, the average intermittency time was 213 ms. From the PL quantum efficiency, slow growth of QDs, intensity trajectory analyses, and previous reports relating surface trap states and PL properties of QDs, we attribute the subsecond PL intensity fluctuations of single CdSe QDs and short-lived "on" and "off" states to a high-density distribution of homogeneous surface trap states.     

High enantioselectivity in rhodium-catalyzed allylic alkylation of 1-substituted 2-propenyl acetates

[reaction: see text] Rhodium-catalyzed asymmetric allylic alkylation of 1-substituted 2-propenyl acetates with dimethyl malonate proceeded with high enantioselectivity in the presence of cesium carbonate as a base and a rhodium catalyst generated from Rh(dpm)(C(2)H(4))(2) (dpm = dipivaloylmethanato) and a chiral phosphino-oxazoline whose basic skeleton is axially chiral binaphthyl to give branch alkylation products in greater than 90% ee.     

Structure and ethanol complexation of cyclic tetrasaccharide in aqueous solution studied by NMR and molecular mechanics

The structure and ethanol complexation of a cyclic tetrasaccharide (CTS) in aqueous solution were investigated by proton NMR spectroscopy and molecular mechanics calculations. Two glucose units, A and B, of CTS are alternatively bonded by alpha-1,3 and alpha-1,6 linkages. The overlapped signals of protons A5, A6S, A6R, B3, B6S and B6R were resolved by spectral simulations to determine their chemical shifts and vicinal coupling constants. All vicinal coupling constants except for the A5-A6 spin system are consistent with the dihedral angles in the X-ray crystal structure. Each of protons A5, A6S, and A6R in the two units of A is equivalent with respect to the chemical shift. The vicinal coupling constants of (3)J(5-6S) and (3)J(5-6R) for unit A are close to the average of two rotamers that are present in crystals. The intensities of cross-peaks in the rotating frame nuclear Overhauser effect spectroscopy (ROESY) spectrum were rather well correlated with the effective distances calculated for the X-ray structure and molecular mechanics structures calculated in vacuo and water, although they are slightly better correlated with molecular mechanics structure in vacuo than with the other structures. From the changes of the chemical shifts of several CTS protons with increasing ethanol concentration, it was suggested that adsorption sites of ethanol on the plate structure of CTS are protons B2 and B4 (site B) in the concave face side and protons A1 and A2 (site A) in the convex back side. The binding constants for sites A and B are 0.0061 and 0.0176 M(-1), respectively. These binding constants are much smaller than a value of 4.1 M(-1) for the ethanol-alpha-cyclodextrin complex.     

Emission of 2-phenylethanol from its β-d-glucopyranoside and the biogenesis of these compounds from [H8] l-phenylalanine in rose flowers

The hydrolysis of 2-phenylethyl β-d-glucopyranoside (3) was found to be partially inhibited by feeding with 2-phenyl-N-glucosyl-acetamidiumbromide (8), a β-glucosidase inhibitor, resulting in a decrease in the diurnal emission of 2-phenylethanol (2) from Rosa damascena Mill. flowers. Detection of [1,1,2,2′,3′,4′,5′,6′-²H₈]-2 and [1,2,2′,3′,4′,5′,6′-²H₇]-2 from R. ‘Hoh-Jun’ flowers fed with [1,1,2,2′,3′,4′,5′,6′-²H₈]-3 suggested that β-glucosidase, alcohol dehydrogenase, and reductase might be involved in scent emission. Comprehensive GC-SIM analyses revealed that [1,2,2,2′,3′,4′,5′,6′-²H₈]-2 and [1,2,2,2′,3′,4′,5′,6′-²H₈]-3 must be biosynthesized from [1,2,2,2′,3′,4′,5′6′-²H₈] l-phenylalanine ([²H₈]-1) with a retention of the deuterium atom at α-position of [²H₈]-1.     

Synthesis and photo-induced dissolution of polymers bearing imino sulfonate groups

Novel photosensitive polymers were synthesized by the copolymerization of methyl methacrylate and 1,2,3,4-tetrahydro-1-naphthylideneimino p-styrenesulfonate (NISS) and by the ternary polymerization of methyl methacrylate, methacrylic acid, and 9-fluorenylideneiminop-styrene-sulfonate (FISS). NISS and FISS units showed good sensitivity to light of wavelengths below 300 nm and below 366 nm, respectively. Although the polymers were insoluble in aqueous alkaline solutions, on irradiation with UV light they became soluble in aqueous alkaline solutions. A remarkable decrease in molecular weight of the polymers was observed during the photolysis of imino sulfonate groups incorporated into the polymers, which assisted the dissolution of the irradiated polymers.     

Reverse zymography using fluorogenic substrates for protease inhibitor detection

A novel, sensitive method for detecting protease inhibitors by using fluorescent protease substrates in gels is described. The protease inhibitors were separated on sodium dodecyl sulfate (SDS)-polyacrylamide gels containing a copolymerized peptide substrate, namely 4-methyl-coumaryl-7-amide (MCA). As the incorporated substrates in the gel, Boc-Phe Ser-Arg-MCA was used for trypsin, Suc-Ala-Ala-Pro-Phe-MCA for alpha-chymotrypsin, and Z-Phe-Arg-MCA for papain. After electrophoresis, washing and incubating the gel with the target protease solutions allowed the substrate to be cleaved by the protease, and the release of the fluorescent 7 amino-4 methyl-coumarin (AMC), which was detected under a UV transilluminator. The uncleaved peptide-MCA substrate remained where the inhibitors were present, and was visualized as dark blue bands on the light-green fluorescent background gel. This new method offers several advantages over other previous methods including: (i) greatly increased sensitivity can be achieved in a shorter period of time, which may be useful for discovering new protease inhibitors in small amounts of crude material; (ii) the procedure is quite simple and quick since the incubation period is very short and no time is needed for staining and destaining steps; (iii) since these probes using substrate specificity/target proteases, they are excellent tools for detection and discrimination of unknown protease inhibitors for various target proteases.     

Living cationic ring-opening polymerization by water-stable initiator: synthesis of a well-defined optically active polythiourethane

Living cationic ring-opening polymerization under air and water was achieved using a well-defined water-resistant cationic initiator in dichloromethane without purification at ambient temperature.     

m-Diethynylbenzene macrocycles: syntheses and self-association behavior in solution

m-Diethynylbenzene macrocycles (DBMs), buta-1,3-diyne-bridged [4(n)]metacyclophanes, have been synthesized and their self-association behaviors in solution were investigated. Cyclic tetramers, hexamers, and octamers of DBMs having exo-annular octyl, hexadecyl, and 3,6,9-trioxadecyl ester groups were prepared by intermolecular oxidative coupling of dimer units or intramolecular cyclization of the corresponding open-chain oligomers. The aggregation properties were investigated by two methods, the (1)H NMR spectra and the vapor pressure osmometry (VPO). Although some discrepancies were observed between the association constants obtained from the two methods, the qualitative view was consistent with each other. The analysis of self-aggregation by VPO revealed unique aggregation behavior of DBMs in acetone and toluene, which was not elucidated by the NMR method. Namely, the association constants for infinite association are several times larger than the dimerization constant, suggesting that the aggregation is enhanced by the formation of dimers (a nucleation mechanism). In polar solvents, DBMs aggregate more strongly than in chloroform due to the solvophobic interactions between the macrocyclic framework and the solvents. Moreover, DBMs self-associate in aromatic solvents such as toluene and o-xylene more readily than in chloroform. In particular, the hexameric DBM having a large macrocyclic cavity exhibits extremely large association constants in aromatic solvents. By comparing the aggregation properties of DBMs with the corresponding acyclic oligomers, the effect of the macrocyclic structure on the aggregation propensity was clarified. Finally, it turned out that DBMs tend to aggregate more readily than the corresponding phenylacetylene macrocycles, acetylene-bridged [2(n)]metacyclophanes, owing to the withdrawal of the electron density from the aromatic rings by the butadiyne linkages which facilitates pi-pi stacking interactions.