Succession of stacking disorder in hard-sphere crystal under gravity by Monte Carlo simulation

We have performed Monte Carlo simulations of hard spheres under gravity. Vertical boundaries are hard walls, which are well separated with each other. On the other hand, the periodic boundary condition is imposed in the horizontal direction. While we previously reported enhancement of crystallinity as well as crystallization due to gravity, we present here the results that demonstrate the succession of a defect. In case that the crystal formed at the bottom of the system includes kinds of stacking disorders for the (0 0 1) growth, twin band structure develops as mediated by a stacking disorder succeeded in the crystal formed in the fluid region which lies on the bottom crystal. In case that the stacking structure along horizontal direction changes from the (1 1 1) stacking to the (0 0 1) stacking, twin band structure in the (0 0 1) stacking region develops as succeeded in the crystal transformed. The twin band structure also becomes large with its upward growth.     

Soluble polymer-supported catalysts containing pendant quaternary onium salts for the addition reaction of oxiranes with carbon dioxide

The addition reaction of oxiranes ( 15a-d ) with carbon dioxide (CO₂) was carried out using 1 mol % of soluble polymer-supported quaternary onium salts as catalysts under atmospheric pressure. The reaction of 15a-d with CO₂ proceeded very smoothly to give the corresponding five-membered cyclic carbonates ( 16a-d ) in high yields at 90-100°C. The catalytic activity of the soluble polymer-supported quaternary onium salts was strongly affected by the following factors: kind of reaction solvent, degree of introduction of the pendant onium salt residues in the polymer chain, and type of alkyl group on the onium salts due to the balance between lipophilicity and steric hindrance of the onium salt residue. Furthermore, these soluble polymer-supported quaternary onium salts were found ordinarily to have higher catalytic activity than low molecular weight quaternary onium salts under the same reaction conditions. It was also found that the rate of reaction was proportional both to catalyst concentration and to oxirane concentration. © 1995 John Wiley & Sons, Inc.     

NAD(P)+-NAD(P)H model. 38. Reduction of aldehyde by 1,4-dihydroquinolin derivative

Benzaldehyde are reduced to benzyl alcohol by a model compound of NAD(P)H almost quantitatively. Reductions of some other aldehydes are also mentioned.     

Adsorption and reactions of NO on clean and CO-precovered Ir(111)

Adsorption and reactions of NO on clean and CO-precovered Ir(111) were investigated by means of X-ray photoelectron spectroscopy (XPS), high-resolution electron energy loss spectroscopy (HR-EELS), infrared reflection absorption spectroscopy (IRAS), and temperature-programmed desorption (TPD). Two NO adsorption states, indicative of fcc-hollow sites and atop sites, were present on the Ir(111) surface at saturation coverage. NO adsorbed on hollow sites dissociated to Na and Oa at temperatures above 283 K. The dissociated Na desorbed to form N2 by recombination of Na at 574 K and by a disproportionation reaction between atop-NO and Na at 471 K. Preadsorbed CO inhibited the adsorption of NO on atop sites, whereas adsorption on hollow sites was not affected by the coexistence of CO. The adsorbed CO reacted with dissociated Oa and desorbed as CO2 at 574 K.     

Direct chiral resolution of tartaric acid by ion-pair capillary electrophoresis using an aqueous background electrolyte with (1R,2R)-(-)-1,2-diaminocyclohexane as a chiral counterion

Chiral resolution of native DL-tartaric acid was achieved by ion-pair capillary electrophoresis (CE) using an aqueous-ethanol background electrolyte with (1R,2R)-(-)-1,2-diaminocyclohexane (R-DACH) as a chiral counterion. Factors affecting chiral resolution and migration time of tartaric acid were studied. By increasing the viscosity of the background electrolyte and the ion-pair formation, using organic solvents with a lower relative dielectric constant, resulted in a longer migration time. The optimum conditions for both high resolution and short migration time of tartaric acid were found to be a mixture of 65% v/v ethanol and 35% v/v aqueous solution containing 30 mM R-DACH and 75 mM phosphoric acid (pH 5.1) with an applied voltage of -30 kV at 25 degrees C, using direct detection at 200 nm. By using this system, the resolution (Rs) of racemic tartaric acid was approximately 1. The electrophoretic patterns of tartaric and malic acids suggest that two carboxyl groups and two hydroxyl groups of tartaric acid are associated with the enantioseparation of tartaric acid by the proposed CE method.     

Inhibitory effects of 1,3-selenazol-4-one derivatives on mushroom tyrosinase

This study reports depigmenting potency of 1,3-selenazol-4-one derivatives, which would be based upon the finding of direct inhibition to mushroom tyrosinase. 1,3-Selenazol-4-one derivatives exhibited inhibitory effect on dopa oxidase activity of mushroom tyrosinase. In this study, inhibitory effects of six kinds of 1,3-selenazol-4-one derivatives (A, B, C, D, E and F) on mushroom tyrosinase were investigated. Compounds at a concentration of 500 microM exhibited 33.4-62.1% of inhibition on dopa oxidase activity of mushroom tyrosinase. Their inhibitory effects were higher than that of kojic acid (31.7%), a well known tyrosinase inhibitor. 2-(4-Methylphenyl)-1,3-selenazol-4-one (A) exhibited the strongest inhibitory effect among them dose-dependently and in competitive inhibition manner.     

Fabrication of polymer Langmuir-Blodgett films containing regioregular poly(3-hexylthiophene) for application to field-effect transistor

Semiconducting thin films consisting of regioregular poly(3-hexylthiophene) (RR-PHT) and poly(N-dodecylacrylamide) (pDDA) were constructed by the Langmuir-Blodgett (LB) technique. A mixture of RR-PHT and pDDA spread from a chloroform solution on a water surface forms a stable monolayer, which can be transferred onto solid substrates by the LB method, yielding a well-defined polymer LB film. Surface morphology studies of the LB film indicate that the RR-PHT is dispersed uniformly throughout the surface. The polymer thin film was chemically doped by contacting with FeCl3 acetonitrile solution, and a conductivity of 5.6 S/cm was achieved. Further, the LB film was utilized as the semiconducting film in the field-effect transistor (FET), and mobilities of 2.2 x 10(-4) and 4.4 x 10(-4) cm2 V(-1) s(-1) were obtained by analyzing the saturated and linear regions of the current-voltage characteristic, respectively.     

2-Silyl group effect on the reactivity of cyclopentane-1,3-diyls. Intramolecular ring-closure versus silyl migration

Generation of singlet and triplet 2-silylcyclopentane-1,3-diyls and their reactivity have been investigated in the thermal and photochemical denitrogenation of 2,3-diaza-7-silylbicyclo[2.2.1]hept-2-ene. 5-Silylcyclopentene (silyl migration product) is quantitatively obtained, while 5-silylbicyclo[2.1.0]pentane (intramolecular ring-closure product) is not detected in the denitrogenation reactions. Deuterium labeling studies clarify that 5-silylcyclopentene is formed by a suprafacial [1,2] silyl migration in singlet 2-silylcyclopentane-1,3-diyl. UDFT calculations closely reproduce the observed reactivity of the singlet diradical: The enthalpic barriers of the intramolecular ring-closure are calculated to be DeltaH++exo468 = 5.8 kcal/mol and DeltaH++endo468 = 6.7 kcal/mol, which are much higher than the energy barrier for the [1,2] silyl migration, DeltaH++468 = 2.7 kcal/mol. The notable effect of the silyl group on raising the energy barrier of the intramolecular cyclization is rationalized by an electronic configuration of the lowest singlet state of 2-silylcyclopentane-1,3-diyls.     

Photoinduced graft polymerization of 2-methacryloyloxyethyl phosphorylcholine on polyethylene membrane surface for obtaining blood cell adhesion resistance

Phospholipid polymer, poly[2-methacryloyloxyethyl phosphorylcholine (MPC)], was grafted with polyethylene (PE) membrane using photoinduced polymerization technique to make the membrane resistant to cell adhesion. The water contact angle on the PE membrane grafted with poly(MPC) decreased with an increase in the photopolymerization time. This decrease corresponded to the increase in the amount of poly(MPC) grafted on the PE surface. The same graft polymerization procedure was applied using other hydrophilic monomers, such as acrylamide (AAm), N-vinylpyrrolidone (VPy) and methacryloyl poly(ethylene glycol) (MPEG). These monomers were also polymerized to form grafted chains on the PE membrane, and the grafting was confirmed with X-ray photoelectron spectroscopy. Analysis of amount and distribution of plasma proteins at the plasma-contacting surface of the original and the modified PE membranes were analyzed using immunogold assay. The grafting of poly(MPC) and poly(VPy) on PE membrane reduced the plasma protein adsorption significantly compared with that on the original PE membrane. However, the PE membranes grafted with poly(AAm) or poly(MPEG) did not show any effects on protein adsorption. Platelet adhesion on the original and modified PE membranes from platelet-rich plasma was also examined. A large number of platelets adhered and activated on the original PE membrane. Grafting with poly(AAm) did not suppress platelet adhesion, but grafting with poly(MPC) or poly(VPy) on the PE membrane was effective in preventing platelet adhesion. It is concluded that the introduction of the phosphorylcholine group on the surface could decrease the cell adhesion to substrate polymer.     

Formation of a new crystalline silicate structure by grafting dialkoxysilyl groups on layered octosilicate

Dialkoxydichlorosilanes ((RO)2SiCl2, R = alkyl) react almost completely with interlayer silanol groups in a layered silicate octosilicate to create a new crystalline silicate structure consisting of new five-membered rings arranged regularly on both sides of the silicate layers. The introduction of dialkoxysilyl groups to the interlamellar region of layered silicates with regular reaction sites provides a new methodology for the design and construction of novel crystalline silicate frameworks by a soft chemical route.