Succession of stacking disorder in hard-sphere crystal under gravity by Monte Carlo simulation

We have performed Monte Carlo simulations of hard spheres under gravity. Vertical boundaries are hard walls, which are well separated with each other. On the other hand, the periodic boundary condition is imposed in the horizontal direction. While we previously reported enhancement of crystallinity as well as crystallization due to gravity, we present here the results that demonstrate the succession of a defect. In case that the crystal formed at the bottom of the system includes kinds of stacking disorders for the (0 0 1) growth, twin band structure develops as mediated by a stacking disorder succeeded in the crystal formed in the fluid region which lies on the bottom crystal. In case that the stacking structure along horizontal direction changes from the (1 1 1) stacking to the (0 0 1) stacking, twin band structure in the (0 0 1) stacking region develops as succeeded in the crystal transformed. The twin band structure also becomes large with its upward growth.     

Soluble polymer-supported catalysts containing pendant quaternary onium salts for the addition reaction of oxiranes with carbon dioxide

The addition reaction of oxiranes ( 15a-d ) with carbon dioxide (CO₂) was carried out using 1 mol % of soluble polymer-supported quaternary onium salts as catalysts under atmospheric pressure. The reaction of 15a-d with CO₂ proceeded very smoothly to give the corresponding five-membered cyclic carbonates ( 16a-d ) in high yields at 90-100°C. The catalytic activity of the soluble polymer-supported quaternary onium salts was strongly affected by the following factors: kind of reaction solvent, degree of introduction of the pendant onium salt residues in the polymer chain, and type of alkyl group on the onium salts due to the balance between lipophilicity and steric hindrance of the onium salt residue. Furthermore, these soluble polymer-supported quaternary onium salts were found ordinarily to have higher catalytic activity than low molecular weight quaternary onium salts under the same reaction conditions. It was also found that the rate of reaction was proportional both to catalyst concentration and to oxirane concentration. © 1995 John Wiley & Sons, Inc.     

Short branching in poly(vinyl alcohol). III. Some properties of model polymers of short-branched poly(vinyl alcohol)

Melting point, the iodine color reaction, and foam fractionation were studied on model poly(vinyl alcohol) (PVA) having short branches of one or two monomer units in length. An increase in the amount of short branching units caused a marked decrease in color intensity of the PVA–iodine reaction and in the melting point. These tendencies were more remarkable when the short branching was two monomer units in length than when it was one monomer unit. It was also found that foam fractionation of an aqueous PVA solution produced PVA fractions with different degree of short branching, the degree increasing with increase in the fraction number. The color intensity of the PVA–iodine reaction has been confirmed to decrease with increase in the fraction number, but this result cannot be explained solely in terms of the short branching. It is concluded that the phenomenon of foam fractionation of PVA and the iodine color reaction of the fraction appear to be governed by many factors such as molecular weight, stereoregularity, and short branching.     

Three bits eight states photochromic recording and nondestructive readout by using IR light

A photochromic polymer film containing three different diarylethene derivatives, that is, 1,2-bis(3,5-dimethyl-2-thienyl)perfluorocyclopentene (1), 1,2-bis(2,5-dimethyl-3-thienyl)perfluorocyclopentene (2), and 1,2-bis(2-methyl-5-phenyl-3-thienyl)perfluorocyclopentene (3) was prepared. Upon UV irradiation, the three derivatives changed to their closed-ring isomers having different colors, yellow, red, and blue. They showed different spectra not only in UV/Vis region but also in the IR spectral region. Upon irradiation with visible light of appropriate wavelengths, each closed-ring isomer was selectively bleached, and three bits eight states recording was performed. The eight states could be read out nondestructively by using IR light of appropriate wavenumbers.     

Adsorption and reactions of NO on clean and CO-precovered Ir(111)

Adsorption and reactions of NO on clean and CO-precovered Ir(111) were investigated by means of X-ray photoelectron spectroscopy (XPS), high-resolution electron energy loss spectroscopy (HR-EELS), infrared reflection absorption spectroscopy (IRAS), and temperature-programmed desorption (TPD). Two NO adsorption states, indicative of fcc-hollow sites and atop sites, were present on the Ir(111) surface at saturation coverage. NO adsorbed on hollow sites dissociated to Na and Oa at temperatures above 283 K. The dissociated Na desorbed to form N2 by recombination of Na at 574 K and by a disproportionation reaction between atop-NO and Na at 471 K. Preadsorbed CO inhibited the adsorption of NO on atop sites, whereas adsorption on hollow sites was not affected by the coexistence of CO. The adsorbed CO reacted with dissociated Oa and desorbed as CO2 at 574 K.     

Direct chiral resolution of tartaric acid by ion-pair capillary electrophoresis using an aqueous background electrolyte with (1R,2R)-(-)-1,2-diaminocyclohexane as a chiral counterion

Chiral resolution of native DL-tartaric acid was achieved by ion-pair capillary electrophoresis (CE) using an aqueous-ethanol background electrolyte with (1R,2R)-(-)-1,2-diaminocyclohexane (R-DACH) as a chiral counterion. Factors affecting chiral resolution and migration time of tartaric acid were studied. By increasing the viscosity of the background electrolyte and the ion-pair formation, using organic solvents with a lower relative dielectric constant, resulted in a longer migration time. The optimum conditions for both high resolution and short migration time of tartaric acid were found to be a mixture of 65% v/v ethanol and 35% v/v aqueous solution containing 30 mM R-DACH and 75 mM phosphoric acid (pH 5.1) with an applied voltage of -30 kV at 25 degrees C, using direct detection at 200 nm. By using this system, the resolution (Rs) of racemic tartaric acid was approximately 1. The electrophoretic patterns of tartaric and malic acids suggest that two carboxyl groups and two hydroxyl groups of tartaric acid are associated with the enantioseparation of tartaric acid by the proposed CE method.     

Fabrication of polymer Langmuir-Blodgett films containing regioregular poly(3-hexylthiophene) for application to field-effect transistor

Semiconducting thin films consisting of regioregular poly(3-hexylthiophene) (RR-PHT) and poly(N-dodecylacrylamide) (pDDA) were constructed by the Langmuir-Blodgett (LB) technique. A mixture of RR-PHT and pDDA spread from a chloroform solution on a water surface forms a stable monolayer, which can be transferred onto solid substrates by the LB method, yielding a well-defined polymer LB film. Surface morphology studies of the LB film indicate that the RR-PHT is dispersed uniformly throughout the surface. The polymer thin film was chemically doped by contacting with FeCl3 acetonitrile solution, and a conductivity of 5.6 S/cm was achieved. Further, the LB film was utilized as the semiconducting film in the field-effect transistor (FET), and mobilities of 2.2 x 10(-4) and 4.4 x 10(-4) cm2 V(-1) s(-1) were obtained by analyzing the saturated and linear regions of the current-voltage characteristic, respectively.     

The effect of gas injection on a thermal argon plasma flow in a water-cooled tube

The effect of gas injection on an atmospheric thermal argon plasma flow in a water-cooled tube was investigated experimentally and numerically. The injection gas is argon, helium, or nitrogen. The static pressure with helium injection increases greatly because of its high thermal conductivity, while little increase occurs for nitrogen injection because of the dissociation. The increasing rate of the static pressure depends on the ratio of the momentum term to the viscosity term. The heat flux to the tube wall with gas injection changes less than that without injection. The numerical results showed variations similar to the experimental ones.     

Synthesis of isoxazolo[2,3-a]quinoxalines and pyrrolo[1,2-a]quinoxalines by 1,3-dipolar cycloaddition reaction

The isoxazolo[2,3-a]quinoxalines 11a,b and pyrrolo[1,2-a]quinoxalines 12a,b were selectively synthesized from the 2-substituted 6-chloroquinoxaline 4-oxides 10a,b . The pyrrolo[1,2-a]quinoxalines 12a,b were clarified to be produced by the ring transformation of the isoxazolo[2,3-a]quinoxalines 11a,b . The pyrrolo[1,2-a]quinoxalines 14a,b were obtained from both 2,6-dichloroquinoxaline 4-oxide 9 and compounds 12a,b .     

Formation of a new crystalline silicate structure by grafting dialkoxysilyl groups on layered octosilicate

Dialkoxydichlorosilanes ((RO)2SiCl2, R = alkyl) react almost completely with interlayer silanol groups in a layered silicate octosilicate to create a new crystalline silicate structure consisting of new five-membered rings arranged regularly on both sides of the silicate layers. The introduction of dialkoxysilyl groups to the interlamellar region of layered silicates with regular reaction sites provides a new methodology for the design and construction of novel crystalline silicate frameworks by a soft chemical route.