Absorption and fluorescence of a nonionic detergent in aqueous solution

The absorption and fluorescence spectra of a detergent, polyoxyethylene octylphenyl ether, were measured in water at different concentrations. The absorption spectra had a peak at 275 mμ and a shoulder at 281 mμ. The spectra were independent of concentration below the critical micelle concentration, but the molar extinction coefficients of the peak and the shoulder increased with concentration above the critical micelle concentration. The critical micelle concentration value derived from the absorption data was in good agreement with those obtained by other methods. The fluorescence spectra of the detergent in water were independent of concentration in dilute solutions, if the intensities of the spectra were normalized at the peak at 302 mμ. At higher concentrations, a weak excimer band appeared at 345 mμ, whose intensity increased with concentration. The excimer band manifested itself at a concentration slightly lower than the critical micelle concentration. The main band decreased and the excimer band increased, as the temperature was raised. An excimer band was observed in the same region of the spectra for the pure detergent, either in the solid or liquid state. The equilibrium solid spectra exhibited a very strong excimer emission. It was concluded that the excimers were formed within micelles in the case of aqueous solutions.     

Adsorption and reactions of NO on clean and CO-precovered Ir(111)

Adsorption and reactions of NO on clean and CO-precovered Ir(111) were investigated by means of X-ray photoelectron spectroscopy (XPS), high-resolution electron energy loss spectroscopy (HR-EELS), infrared reflection absorption spectroscopy (IRAS), and temperature-programmed desorption (TPD). Two NO adsorption states, indicative of fcc-hollow sites and atop sites, were present on the Ir(111) surface at saturation coverage. NO adsorbed on hollow sites dissociated to Na and Oa at temperatures above 283 K. The dissociated Na desorbed to form N2 by recombination of Na at 574 K and by a disproportionation reaction between atop-NO and Na at 471 K. Preadsorbed CO inhibited the adsorption of NO on atop sites, whereas adsorption on hollow sites was not affected by the coexistence of CO. The adsorbed CO reacted with dissociated Oa and desorbed as CO2 at 574 K.     

Direct chiral resolution of tartaric acid by ion-pair capillary electrophoresis using an aqueous background electrolyte with (1R,2R)-(-)-1,2-diaminocyclohexane as a chiral counterion

Chiral resolution of native DL-tartaric acid was achieved by ion-pair capillary electrophoresis (CE) using an aqueous-ethanol background electrolyte with (1R,2R)-(-)-1,2-diaminocyclohexane (R-DACH) as a chiral counterion. Factors affecting chiral resolution and migration time of tartaric acid were studied. By increasing the viscosity of the background electrolyte and the ion-pair formation, using organic solvents with a lower relative dielectric constant, resulted in a longer migration time. The optimum conditions for both high resolution and short migration time of tartaric acid were found to be a mixture of 65% v/v ethanol and 35% v/v aqueous solution containing 30 mM R-DACH and 75 mM phosphoric acid (pH 5.1) with an applied voltage of -30 kV at 25 degrees C, using direct detection at 200 nm. By using this system, the resolution (Rs) of racemic tartaric acid was approximately 1. The electrophoretic patterns of tartaric and malic acids suggest that two carboxyl groups and two hydroxyl groups of tartaric acid are associated with the enantioseparation of tartaric acid by the proposed CE method.     

Fabrication of polymer Langmuir-Blodgett films containing regioregular poly(3-hexylthiophene) for application to field-effect transistor

Semiconducting thin films consisting of regioregular poly(3-hexylthiophene) (RR-PHT) and poly(N-dodecylacrylamide) (pDDA) were constructed by the Langmuir-Blodgett (LB) technique. A mixture of RR-PHT and pDDA spread from a chloroform solution on a water surface forms a stable monolayer, which can be transferred onto solid substrates by the LB method, yielding a well-defined polymer LB film. Surface morphology studies of the LB film indicate that the RR-PHT is dispersed uniformly throughout the surface. The polymer thin film was chemically doped by contacting with FeCl3 acetonitrile solution, and a conductivity of 5.6 S/cm was achieved. Further, the LB film was utilized as the semiconducting film in the field-effect transistor (FET), and mobilities of 2.2 x 10(-4) and 4.4 x 10(-4) cm2 V(-1) s(-1) were obtained by analyzing the saturated and linear regions of the current-voltage characteristic, respectively.     

1,3-Dipolar cycloaddition reaction of phenanthridinium N-imines and N-benzoylimine with acetylenic compounds

N-Aminophenanthridinium salt reacted with dimethyl acetylenedicarboxylate in the presence of potassium carbonate to give a 3,3a-dihydropyrazolo[1,5-f]phenanthridine but with mono-substituted acetylenes (ethyl propiolate and benzoylacetylene) it produced aromatized pyrazolo-[1,5-f]phenanthridines (XII and XIII). The reaction of the N-benzoylimine with di-substituted acetylenes (dimethyl acetylenedicarboxylate and methyl phenylpropiolate) and mono-substituted acetylenes (ethyl propiolate and benzoylacetylene) yielded 1,3a-dihydropyrazolo[1,5-f]phenanthridines and the aromatized products (XII and XIII), respectively.     

Formation of a new crystalline silicate structure by grafting dialkoxysilyl groups on layered octosilicate

Dialkoxydichlorosilanes ((RO)2SiCl2, R = alkyl) react almost completely with interlayer silanol groups in a layered silicate octosilicate to create a new crystalline silicate structure consisting of new five-membered rings arranged regularly on both sides of the silicate layers. The introduction of dialkoxysilyl groups to the interlamellar region of layered silicates with regular reaction sites provides a new methodology for the design and construction of novel crystalline silicate frameworks by a soft chemical route.     

Self-organized glycoclusters along DNA: effect of the spatial arrangement of galactoside residues on cooperative lectin recognition

We describe herein the relationship between the spatial arrangement of self-organized galactose clusters and lectin recognition. beta-Galactose-modified deoxyuridine phosphoramidite was synthesized and applied to solid-phase synthesis to provide 18-, 20-, and 22-mers of site-specifically galactosylated oligodeoxynucleotides (Gal-ODNs). These Gal-ODNs were self-organized through hybridization with the corresponding 18-, 20-, and 22-mers of half-sliding complementary ODNs (hsc-ODNs) to give periodic galactoside clusters. The self-organization of ODNs was confirmed by size exclusion chromatography and gel electrophoresis. The binding of the Gal-clusters to the FITC-labeled RCA(120) lectin was analyzed by monitoring the change in fluorescence intensity. The assembly of 20-mer Gal-ODN with the 20-mer hsc-ODN was strongly and cooperatively recognized by the lectin. The 18-mer assembly was bound more weakly and less cooperatively, and the 22-mer assembly was minimally bound to the lectin. RCA(120) lectin recognized not only the density of galactoside residues, but also the spatial arrangement. The size of the Gal cluster was estimated from the association constant of Gal-ODN with hsc-ODN. The relationship between lectin-recognition and Gal-cluster size is also discussed.     

Synthesis of enantiopure 1,2-diamine attached to cross-linked polystyrene and its application to an insoluble catalyst for asymmetric hydrogenation

A novel enantiopure 1,2-diamine (5) having two phenolic hydroxy groups was attached into chloromethylated polystyrene through benzyl ether linkage, which was used as a chiral ligand of the catalyst in asymmetric hydrogenation of acetophenone.     

1H-NMR Investigation of the Binding of 2-Methylnaphthalene to α-Cyclodextrin in D2O Solutions

As -cyclodextrin (-CD) was added to D₂Osolutions of 2-methylnaphthalene, its proton signals shifted to lower fieldsat low concentrations of -CD. At 2.0 × 10^-2 moldm^-3 of -CD, however, a reverse, higher-field shift wasobserved for the H-8 signal, indicating the formation of 1 : 1 and 2 : 1-CD–2-methylnaphthalene inclusion complexes. Intrinsic chemicalshift differences of all the protons in 2-methylnaphthalene have beenevaluated for both the 1 : 1 and the 2 : 1-CD–2-methylnaphthalene inclusion complexes. These intrinsicchemical shift differences suggest that the first -CD molecule has noselectivity in accommodating one end of uncomplexed 2-methylnaphthalene;-CD binds to a methyl group, as well as a naphthalene ring-end havingno methyl group, to form the 1 : 1 inclusion complex, resulting in theformation of two kinds of 1 : 1 complexes.     

Salt effect in the base-catalyzed polymerization of unsaturated amide compounds. III. Nature of the polymerization system

Coordination complexes of lithium chloride with polar solvents and monomers were isolated, and their physical properties were studied. The parallel between stabilities of isolated complexes and coordination function in the polymerization system is discussed. The increase of the Q and e values of p-vinylbenzamide (VBA) supports the mechanism of vinyl-type polymerization of VBA in the presence of the salt. The specific solvent effect of dimethyl sulfoxide was determined by measurement of electrical conductivity of a model system.