Fabrication of polymer Langmuir-Blodgett films containing regioregular poly(3-hexylthiophene) for application to field-effect transistor

Semiconducting thin films consisting of regioregular poly(3-hexylthiophene) (RR-PHT) and poly(N-dodecylacrylamide) (pDDA) were constructed by the Langmuir-Blodgett (LB) technique. A mixture of RR-PHT and pDDA spread from a chloroform solution on a water surface forms a stable monolayer, which can be transferred onto solid substrates by the LB method, yielding a well-defined polymer LB film. Surface morphology studies of the LB film indicate that the RR-PHT is dispersed uniformly throughout the surface. The polymer thin film was chemically doped by contacting with FeCl3 acetonitrile solution, and a conductivity of 5.6 S/cm was achieved. Further, the LB film was utilized as the semiconducting film in the field-effect transistor (FET), and mobilities of 2.2 x 10(-4) and 4.4 x 10(-4) cm2 V(-1) s(-1) were obtained by analyzing the saturated and linear regions of the current-voltage characteristic, respectively.     

The effect of gas injection on a thermal argon plasma flow in a water-cooled tube

The effect of gas injection on an atmospheric thermal argon plasma flow in a water-cooled tube was investigated experimentally and numerically. The injection gas is argon, helium, or nitrogen. The static pressure with helium injection increases greatly because of its high thermal conductivity, while little increase occurs for nitrogen injection because of the dissociation. The increasing rate of the static pressure depends on the ratio of the momentum term to the viscosity term. The heat flux to the tube wall with gas injection changes less than that without injection. The numerical results showed variations similar to the experimental ones.     

Multiple and irreversible binding of cis-diamminedichloroplatinum(II) to human serum albumin and its effect on warfarin binding.

Irreversible bindings of cis-diamminedichloroplatinum(II) (cis-DDP) to human serum albumin (HSA) were investigated in a pH 7.4 buffer containing 0.1 M NaCl at various molar ratios (cis-DDP/HSA) up to 60 over a 14 d period (37 degrees C). The metal binding seemed to reach a plateau when incubated at less than 10 times excess of cis-DDP. As the molar ratio increased, the reaction rate was relatively fast within the first day, followed by a moderate increase in the metal binding. When incubated at 60 times excess of cis-DDP, the metal bound as much as 20 mol per mol of HSA in 14 d. Fluorescence quenching of the metal-bound protein suggested that the tryptophan residue was gradually exposed to a hydrophilic environment as the metal binding increased. Furthermore, cis-DDP cleaved disulfide bonds at the ratio of 1 mol of disulfide bond per 5.3 mol of the metal binding. It was therefore suggested that the metal binding also occurred at several sites other than the disulfide bond. Warfarin binding to the metal-bound protein, examined by fluorescence changes, also decreased with increasing metal binding or cleavage of the disulfide bonds. Thus, cis-DDP bound to multiple sites in addition to the lone sulfhydryl group (Cys-34), suggesting that massive conformational changes of the protein took place.     

1,3-Dipolar cycloaddition reaction of phenanthridinium N-imines and N-benzoylimine with acetylenic compounds

N-Aminophenanthridinium salt reacted with dimethyl acetylenedicarboxylate in the presence of potassium carbonate to give a 3,3a-dihydropyrazolo[1,5-f]phenanthridine but with mono-substituted acetylenes (ethyl propiolate and benzoylacetylene) it produced aromatized pyrazolo-[1,5-f]phenanthridines (XII and XIII). The reaction of the N-benzoylimine with di-substituted acetylenes (dimethyl acetylenedicarboxylate and methyl phenylpropiolate) and mono-substituted acetylenes (ethyl propiolate and benzoylacetylene) yielded 1,3a-dihydropyrazolo[1,5-f]phenanthridines and the aromatized products (XII and XIII), respectively.     

Synthesis of isoxazolo[2,3-a]quinoxalines and pyrrolo[1,2-a]quinoxalines by 1,3-dipolar cycloaddition reaction

The isoxazolo[2,3-a]quinoxalines 11a,b and pyrrolo[1,2-a]quinoxalines 12a,b were selectively synthesized from the 2-substituted 6-chloroquinoxaline 4-oxides 10a,b . The pyrrolo[1,2-a]quinoxalines 12a,b were clarified to be produced by the ring transformation of the isoxazolo[2,3-a]quinoxalines 11a,b . The pyrrolo[1,2-a]quinoxalines 14a,b were obtained from both 2,6-dichloroquinoxaline 4-oxide 9 and compounds 12a,b .     

Formation of a new crystalline silicate structure by grafting dialkoxysilyl groups on layered octosilicate

Dialkoxydichlorosilanes ((RO)2SiCl2, R = alkyl) react almost completely with interlayer silanol groups in a layered silicate octosilicate to create a new crystalline silicate structure consisting of new five-membered rings arranged regularly on both sides of the silicate layers. The introduction of dialkoxysilyl groups to the interlamellar region of layered silicates with regular reaction sites provides a new methodology for the design and construction of novel crystalline silicate frameworks by a soft chemical route.     

Self-organized glycoclusters along DNA: effect of the spatial arrangement of galactoside residues on cooperative lectin recognition

We describe herein the relationship between the spatial arrangement of self-organized galactose clusters and lectin recognition. beta-Galactose-modified deoxyuridine phosphoramidite was synthesized and applied to solid-phase synthesis to provide 18-, 20-, and 22-mers of site-specifically galactosylated oligodeoxynucleotides (Gal-ODNs). These Gal-ODNs were self-organized through hybridization with the corresponding 18-, 20-, and 22-mers of half-sliding complementary ODNs (hsc-ODNs) to give periodic galactoside clusters. The self-organization of ODNs was confirmed by size exclusion chromatography and gel electrophoresis. The binding of the Gal-clusters to the FITC-labeled RCA(120) lectin was analyzed by monitoring the change in fluorescence intensity. The assembly of 20-mer Gal-ODN with the 20-mer hsc-ODN was strongly and cooperatively recognized by the lectin. The 18-mer assembly was bound more weakly and less cooperatively, and the 22-mer assembly was minimally bound to the lectin. RCA(120) lectin recognized not only the density of galactoside residues, but also the spatial arrangement. The size of the Gal cluster was estimated from the association constant of Gal-ODN with hsc-ODN. The relationship between lectin-recognition and Gal-cluster size is also discussed.     

Synthesis of enantiopure 1,2-diamine attached to cross-linked polystyrene and its application to an insoluble catalyst for asymmetric hydrogenation

A novel enantiopure 1,2-diamine (5) having two phenolic hydroxy groups was attached into chloromethylated polystyrene through benzyl ether linkage, which was used as a chiral ligand of the catalyst in asymmetric hydrogenation of acetophenone.     

Facile deposition of [60]fullerene and carbon nanotubes on ITO electrode by electrochemical oxidative polymerization of ethylenedioxythiophene

It was found that [60]fullerene encapsulated in p-sulfonatocalix[8]arene and single-walled carbon nanotubes (SWNTs) solubilized by sodium dodecylsulfate can be readily deposited on the ITO electrode by electrochemical oxidative polymerization of ethylenedioxythiophene (EDOT) without chemical modification of these carbon clusters. The driving force for the deposition is an electrostatic interaction between the anionic complexes and the cationic charges of poly(EDOT) formed in the oxidative polymerization process. The surface morphology was thoroughly characterized by scanning electron micrograph: the [60]fullerene/poly(EDOT) film is covered by nano-particles with 20-100 nm diameters whereas the SWNTs/poly(EDOT) film is covered by nanorods with several microm length and ca. 100 nm diameter. The results indicate that the anionic complexes act as nuclei for the polymer growth in the oxidation polymerization. Interestingly, when these modified ITO electrodes were photoirradiated, the appearance of a photocurrent wave was observed. The action spectra showed that the photoexcited energy of [60]fullerene or SWNTs is efficiently collected by the electroconductive poly(EDOT) film and transferred to the ITO electrode.     

1H-NMR Investigation of the Binding of 2-Methylnaphthalene to α-Cyclodextrin in D2O Solutions

As -cyclodextrin (-CD) was added to D₂Osolutions of 2-methylnaphthalene, its proton signals shifted to lower fieldsat low concentrations of -CD. At 2.0 × 10^-2 moldm^-3 of -CD, however, a reverse, higher-field shift wasobserved for the H-8 signal, indicating the formation of 1 : 1 and 2 : 1-CD–2-methylnaphthalene inclusion complexes. Intrinsic chemicalshift differences of all the protons in 2-methylnaphthalene have beenevaluated for both the 1 : 1 and the 2 : 1-CD–2-methylnaphthalene inclusion complexes. These intrinsicchemical shift differences suggest that the first -CD molecule has noselectivity in accommodating one end of uncomplexed 2-methylnaphthalene;-CD binds to a methyl group, as well as a naphthalene ring-end havingno methyl group, to form the 1 : 1 inclusion complex, resulting in theformation of two kinds of 1 : 1 complexes.