Synthesis,structure, and dynamic behavior of cyclopentadienyl-lithium, -sodium,and -potassium annelated with bicyclo[2.2.2]octene units: a systematic study on site exchange of alkali metals on a cyclopentadienyl ring in tetrahydrofuran

Novel cyclopentadienyl (Cp)-alkali metal complexes 1-M and 2-M (M = Li, Na, K), in which the Cp ring is annelated with two bicyclo[2.2.2]octene units and substituted with a phenyl group for 1 and a tert-butyl group for 2, were synthesized, and their structures and dynamic behaviors were investigated by means of X-ray crystallography, dynamic (13)C NMR, and DFT calculations. The X-ray crystallography results indicated that 1-Li, 1-Na, and 2-Na form monomeric contact ion pairs (CIP) with three THF molecules coordinated to the metal atom. Also, in THF-d(8), all of the 1-M and 2-M form monomeric CIP in the ground state. However, variable-temperature (13)C NMR measurements of 1-M and 2-M in THF-d(8) demonstrated dynamic behavior in which the metal ion exchanges positions between the upper and lower faces of the Cp ring. From a study of the concentration dependence of the dynamic behavior, the exchange was found to proceed principally as an intramolecular process at concentration ranges lower than 0.2 M. The experimentally observed deltaG values for the intramolecular exchange process for all the 1-M and 2-M (except for 2-Li, whose intramolecular process was too slow to observe) were found to be quite similar in THF-d(8) solution and to fall within the range of 12-14 kcal mol(-)(1). Within this range, a tendency was observed for the deltaG values to increase as the size of the metal decreased. Theoretical calculations (B3LYP/6-31G(d)) afforded considerably large values as the gas-phase dissociation energy for 1-M (162.7 kcal mol(-)(1) for M = Li; 131.6 kcal mol(-)(1) for M = Na; 110.9 kcal mol(-)(1) for M = K) and for 2-M (170.0 kcal mol(-)(1) for M = Li; 137.5 kcal mol(-)(1) for M = Na; 115.4 kcal mol(-)(1) for M = K). These values should be compensated for by a decrease in the solvation energies for the metal ions with increasing size, as exemplified by the calculated solvation energy for M(+)(Me(2)O)(4), which serves as a model for metal ions solvated with four molecules of THF (-122.9 kcal mol(-)(1) for M = Li; -94.7 kcal mol(-)(1) for M = Na; -67.7 kcal mol(-)(1) for M = K). This compensation results in a small difference in the overall energy for dissociation of 1-M or 2-M in ethereal solutions, thus supporting the similar deltaG values observed for the intramolecular metal exchange.     

Thermal degradation of poly[(tetramethyl-p-silphenylene) siloxane]

For the purpose of studying the mechanism of thermal degradation of poly[(tetramethyl-p-silphenylene) Siloxane] (poly TMPS) a series of polymers with silphenylene and siloxane bonds in the main chain were prepared and subjected to thermogravimetry (TG) and pyrolysis study. Analyses of products from poly TMPS degradation (in vacuum at a constant temperature) by gas chromatography (GC), infrared (IR), nuclear magnetic resonance (NMR) spectroscopy, and gas chromatography-mass spectrometry (GC–MS) revealed that degradation occurs at the silphenylene bonds. The TG curves obtained in He for heating rates of 1,2,2.5,7.5, and 10°C/min were analyzed by the Ozawa method; activation energies of 39 ± 1 and 45 ± 2 kcal/mol were obtained respectively for the initial cleavage of the methyl side group and the later-stage scission of the main-chain silphenylene bond which leads to a major weight loss. The results agree with those obtained for other structurally similar polymers.     

Phase Separation in Sol-Gel System Containing Mixture of 3- and 4-Functional Alkoxysilanes

The phase separation behavior of gelling systems containing the mixture of 3-functional and 4-functional alkoxysilanes has been investigated. The relation between the starting composition and resultant macroporous morphology was examined using tetramethoxysilane (TMOS) and vinyltrimethoxysilane (VTMS) as starting alkoxysilanes, formamide (FA) as an additive, under an acidic condition. Up to TMOS:VTMS molar ratio of 0.5:0.5, the phase relation remained almost unchanged from that of pure TMOS system which exhibits morphology with well-defined co-continuous macropores in a very limited concentration region. On the VTMS-rich side typically TMOS:VTMS = 0.2:0.8, however, the co-continuous macroporous morphology was obtained in a broader composition range than those of either pure TMOS or VTMS system. A dome-like pseudo binary region was obtained with the two-phase region extending toward FA-rich direction. The domain size and pore volume of the gels with macroporous morphology could be controlled by alkoxide:water ratio and total solvent fraction, respectively.     

Lignified natural products as potential medicinal resources. I. Potentiation of hemolytic plaque-forming cell production in mice

We have found that water-soluble extracts of lignified natural products are strong potentiaters of hemolytic plaque-forming cell production in mice. Apparently, the active components involved belong to a lignin family. Consequently, study of medicinal potential, especially immunopotentiating capacity, of lignified materials is important.     

Stereoselective synthesis of 1,4-disubstituted 1,3-diene

New synthetic methods for the preparation of 1,3-dienes are described.     

Proofs of macrocyclization of gable porphyrins as mimics of photosynthetic light-harvesting complexes

Porphyrin macrocycles composed of five and six units of m-gable imidazolylporphyrinatozinc (1-Zn) were synthesized by self-assembled cyclization followed by ring-closing metathesis linkings. Each porphyrin macrocycle was isolated by GPC chromatography, and their molecular weights were determined by MALDI-TOF mass spectroscopy. These structures represent mimics of light-harvesting complexes in photosynthetic bacteria. [structure: see text]     

A regio- and stereoselective alpha-methylation of gamma,delta-epoxy-alpha,beta-unsaturated esters with a Me2Zn-CuCN reagent

A highly regio- and stereoselective alpha-methylation reaction of gamma,delta-epoxy-alpha,beta-unsaturated esters was achieved by using a Me2Zn-CuCN reagent.     

Cyclopolycondensations. VII. Preparation of aromatic poly(ureido acids) by the low-temperature solution polymerization and cyclodehydration to fully aromatic polyquinazolinediones

Fully aromatic polyquinazolinediones (IV) of high molecular weight were obtained by thermal cyclodehydration of aromatic poly(uredio acids) (III) prepared by the polyaddition reaction of 4,4′-diaminobiphenyl-3,3′-dicarboxylic acid (I) with aromatic diisocyanates (II). From the kinetic study of reactions of model systems (anthranilic acid with phenyl isocyanate) in the presence of a variety of basic catalysts, it was established that tertiary amines had the highest catalytic activity for the formation of ureido linkage. The optimum polymerization conditions were determined by the study of reaction variables such as monomer concentration, polymerization temperature, monomer ratio, and catalyst concentration. The effect of polarity and purity of organic solvents and reactants was also studied.     

Selective desorption and analysis of humic substances on suspended particles in river water

The elemental analysis and morphology of individual particles indicate that the dominant suspended particles in river water are kaolin covered with hydrated iron(III) oxide which strongly sorbs humic substances. Suspended particles, about 1 mg, collected from 250 ml of water by centrifugation, are treated with 0.7 ml of 0.1M sodium hydroxide to desorb humic substances. Approximately 60% of copper and 30% of lead on or in suspended particles exist as humic complexes.     

Preparation and characterization of silicalite-1 membranes prepared by secondary growth of seeds with different crystal sizes

MFI-type zeolite particles of 0.1–1 μm in diameter were prepared by adjusting tetra-n-propylammonium hydroxide (TPAOH) and water contents in synthesis mixtures. Using those particles as seeds, MFI-type zeolite membranes were prepared on the surface of a porous mullite tube by secondary growth. The membranes were formed as polycrystalline zeolite layers on and inside the porous support, and the membranes were composed of the [h 0 h]-oriented crystallites. The membrane consisting of a-oriented crystallites could be also prepared. However, the a-oriented zeolite layers were not active on the permeation properties of butanes. Rather the size and loaded amount of the seed particles influenced on the permeation properties through the membranes. As a result, the n-C₄H₁₀/i-C₄H₁₀ permselectivity could be increased to 220 by adjusting the size and the loaded amount of particles. These results suggest that the number of loaded particles affects on the permeation properties through the membranes.