On-chip diagnosis of subclinical mastitis in cows by electrochemical measurement of neutrophil activity in milk

Subclinical mastitis is a common infectious disease affecting dairy cows. To develop an early diagnostic device for this disease, we focused on measuring an increase in the number of neutrophils in raw milk of mastitic cows. Superoxide anions (O(2)(-)), secreted by neutrophils, can be a good indicator of neutrophil concentration, and therefore, the seriousness of the mastitis. In this study, neutrophils in raw milk samples were separated from fat globules in a flow channel using differences in specific gravity and specific adhesion of neutrophils to P-selectin. Neutrophils trapped in the flow channel were subsequently concentrated in an array of micropillars of a working electrode modified with P-selectin and superoxide dismutase. The O(2)(-) secreted from the trapped neutrophils was electrochemically detected. A difference in the detection current was observed between normal and mastitic milk samples. A clear linear relationship between the electric current and cell density was observed.     

New measurements of high-momentum nucleons and short-range structures in nuclei

We present new measurements of electron scattering from high-momentum nucleons in nuclei. These data allow an improved determination of the strength of two-nucleon correlations for several nuclei, including light nuclei where clustering effects can, for the first time, be examined. The data also include the kinematic region where three-nucleon correlations are expected to dominate.     

High-speed wavelength-division multiplexing quantum key distribution system

A high-speed quantum key distribution system was developed with the wavelength-division multiplexing (WDM) technique and dedicated key distillation hardware engines. Two interferometers for encoding and decoding are shared over eight wavelengths to reduce the system's size, cost, and control complexity. The key distillation engines can process a huge amount of data from the WDM channels by using a 1 Mbit block in real time. We demonstrated a three-channel WDM system that simultaneously uses avalanche photodiodes and superconducting single-photon detectors. We achieved 12 h continuous key generation with a secure key rate of 208 kilobits per second through a 45 km field fiber with 14.5 dB loss.     

Chemistry of fullerene epoxides: synthesis, structure, and nucleophilic substitution-addition reactivity

Fullerene epoxides, C??O(n), having epoxide groups directly attached to the fullerene cage, constitute an interesting class of fullerene derivatives. In particular, the chemical transformations of fullerene epoxides are expected to play an important role in the development of functionalized fullerenes. This is because such transformations can readily afford a variety of mono- or polyfunctionalized fullerene derivatives while conserving the epoxy ring arrangement on the fullerene surface, as seen in representative regioisomeric fullerene polyepoxides. The first part of this review addresses the synthesis and structural characterization of fullerene epoxides. The formation of fullerene epoxides through different oxidation reactions is then explored. Adequate characterization of the isolated fullerene epoxides was achieved by concerted use of NMR and LC-MS techniques. The second part of this review addresses the substitution of fullerene epoxides in the presence of a Lewis acid catalyst. Most major substitution products have been isolated as pure compounds and their structures established through spectroscopic methods. The correlation between the structure of the substitution product and the oxygenation pattern of the starting materials allows elucidation of the mechanistic features of this transformation. This approach promises to lead to rigorous regioselective production of various fullerene derivatives for a wide range of applications.     

Preparation and Characterization of Highly Proton-Conductive Composites Composed of Phosphoric Acid-Doped Silica Gel and Styrene-Ethylene-Butylene-Styrene Elastomer

Highly proton-conductive elastic composites have been successfully prepared from H₃PO₄-doped silica gel and a styrene-ethylene-butylene-styrene (SEBS) block elastic copolymer. Ionic conductivities of the composites depended on the concentration of H₃PO₄ and the heat treatment temperature of the H₃PO₄-doped silica gel. It was found that H₃PO₄ added is present mainly as free orthophosphoric acid in the silica gel. The composite composed of H₃PO₄-doped silica gel with a molar ratio of H₃PO₄/SiO₂ = 0.5 heat-treated at temperatures below 200°C and SEBS elastomer in 5 mass% showed a high conductivity of 10^–5 S cm^–1 at 25°C in an dry N₂ atmosphere. The water adsorption during a storage in 25% relative humidity at room temperature for 1 day enhanced the ionic conductivities of composites by about one order of magnitude. Lower conductivities obtained in the composite with the H₃PO₄-doped silica gel heat-treated at 250°C for 1 h were due to the formation of crystalline Si₃(PO₄)₄. The temperature dependence of conductivity of the composites was the Vogel-Tamman-Fulcher type, indicating that proton was transferred through a liquidlike phase formed in micropores of the H₃PO₄-doped silica gels. The temperature dependence of the modulus of the composite was similar to that of the SEBS elastomer. The thermoplastically deforming temperature of the composite was around 100°C, which was higher by 30°C than that of the SEBS elastomer.     

Application of Protonic Acid-Doped Silica Gels to Electric Double-Layer Capacitors

Silica gels doped with several protonic acids such as HClO₄, H₂SO₄ and H₃PO₄ have been prepared by the sol-gel method and totally solid electric double-layer capacitors have been successfully fabricated using the highly proton-conductive silica gels as an electrolyte and activated carbon powder (ACP) hybridized with the silica gels as a polarizable electrode. It was found that the addition of HClO₄, which had the highest value of acid dissociation constant among these three acids, most effectively increased the proton conductivity of the resultant acid-doped silica gels. Tablets of the HClO₄-doped silica gels exhibited conductivities as high as 10^–5–10^–2 S cm^–1 at room temperature in dry N₂ atmosphere. One of the capacitors fabricated using the protonic acid-doped silica gels had a capacitance of 44 F/(gram of total ACP in the capacitor), which was comparable to those of conventional capacitors using liquid electrolytes.     

Ultrafast all-optical signal processing with Symmetric Mach–Zehnder type all-optical switches

We present Symmetric Mach–Zehnder (SMZ) type all-optical switches: an SMZ all-optical switch, a polarization-discriminating SMZ (PD-SMZ) all-optical switch, and a delayed interference signal wavelength converter (DISC). These switches are capable of ultrafast, low control power, and low chirp switching, which is not restricted by slow relaxation of highly efficient nonlinearities. High repetition operation unrestricted by slow relaxation is also possible for these switches. This is because of a push–pull modulation scheme or sometimes called a differential phase modulation scheme. These three devices are similar, but different in some important aspects, thus a comparison is made among the three. Then semiconductor optical amplifiers (SOAs) are discussed as a nonlinear phase shifter for these devices. Then, ultrafast all-optical signal processing using SOA based SMZs is demonstrated. Error-free demultiplexing from 168 to 10.5 Gbit/s is presented, in which a hybrid-integrated SMZ (HI-SMZ) is used as a demultiplexer. In pulse regeneration experiment, the signal pulses at 84 Gbit/s are regenerated by the PD-SMZ and the regenerated pulses are demultiplexed to 10.5 Gbit/s by the HI-SMZ to verify error-free operation. The retiming capability of this scheme is quantitatively demonstrated. Also presented is error-free all-optical wavelength conversion at 168 Gbit/s using the DISC. These results represent the fastest error-free operations reported to date in each category.     

Recent Progress of Photonic Crystal Fibers

Photonic crystal fibers are attractive since we can realize a wide variety of unique features in the PCFs, which cannot be realized in conventional single-mode fibers. We describe recent progress in the PCF.     

Observation of time-dependent CP violation in B0 --> eta'K0 decays and improved measurements of CP asymmetries in B0 --> phiK0, KS0KS0KS0 and B0 --> J/psiK0 decays

We present improved measurements of CP-violation parameters in B(0) --> phiK(0), eta(')K(0), KS(0)KS(0)KS(0) decays based on a sample of 535 x 10(6) BB pairs collected at the Upsilon(4S) resonance with the Belle detector at the KEKB energy-asymmetric e(+)e(-) collider. We obtain sin2phi1(eff)=+0.64+/-0.10(stat)+/-0.04(syst) for B(0) --> eta(')K(0), +0.50+/-0.21(stat)+/-0.06(syst) for B(0) --> phiK(0), and +0.30+/-0.32(stat)+/-0.08(syst) for B(0) --> KS(0)KS(0)KS(0) decays. We have observed CP violation in the B(0) --> eta(')K(0) decay with a significance of 5.6 standard deviations. We also perform an improved measurement of CP asymmetries in B(0) --> J/psiK(0) decays and obtain sin2phi1=+0.642+/-0.031(stat)+/-0.017(syst).     

Fine-patterning on glass substrates by the sol-gel method

A novel process has been developed to form fine patterns on glass substrates. The process consists of the following steps: (1) coating of gel film on a substrate, (2) patterning on the gel film, and (3) heat-treatment. The key point in this process is the control of hardening of the gel films by the addition of organic polymers such as polyethylene glycol (PEG). The addition of PEG increased the viscosity of the coating solutions and delayed the gelation time, but had little effect on the optical properties of the resultant heat-treated glass films. The newly developed process is expected to be applicable to the formation of the optical devices such as diffraction gratings and pre-groovesof optical memory disks.