Effect of the pore surface modification of an inorganic substrate on the plasma‐grafting behavior of pore‐filling‐type organic/inorganic composite membranes

We have investigated the effect of the surface state and surface treatment of the pores of an inorganic substrate on the plasma‐grafting behavior of pore‐filling‐type organic/inorganic composite membranes. Shirasu porous glass (SPG) was used as the inorganic substrate, and methyl acrylate was used as the grafting monomer. The grafting rate increased as the density of silanol on the SPG substrate increased. This result suggests that radicals are generated mainly at the silanol groups on the pore surface by plasma irradiation. The SPG substrates were treated with silane coupling agents used to control the mass of organic material bonded to the pore surface. The thickness of the grafted layer became thinner as the mass of organic material bonded to the pore surface of SPG increased. This decrease in the thickness of the grafted layer could be explained by the decrease in the penetration depth of vacuum ultraviolet rays contained in plasma having a wavelength of less than 160 nm that generated radicals in the pores of the substrate. The thickness of the grafted layer inside the SPG substrates could be controlled through the control of the mass of organic material bonded to the pore surface of the SPG substrate. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 846–856, 2006     

Preparation and certification of the new reference materials; plastics (disk form, JSAC 0621-0625) for determination of mercury using x-ray fluorescent analysis.

The Japan Society for Analytical Chemistry has developed some new plastic certified reference materials (CRMs) for the analysis of mercury in polyester disks using XRF analysis. These CRMs (named as JSAC 0621-0625) were prepared by casting polyesters including a toluene solution of organometallic compounds as a standard. Concentrations of the five levels of mercury ranged from 0 to 250 mg/kg. Homogeneity tests of prepared disks had shown excellent results. Interlaboratory comparison study for the certification was performed by 15 laboratory participants. The z-scores in robust statistical method was applied for the evaluation of outliers. The certified values were assigned after discarding outliers. The uncertainties of certified values were determined as the confidence levels of 95%.     

Separation of fulvic acid from soil extracts based on ion-pair formation with a cationic surfactant.

A novel method for separating fulvic acid (FA) from soil extracts is proposed. The FA, defined as the acid-soluble fraction of an alkaline extract of soil, was separated based on the precipitation of an ion-pair with a cationic surfactant, such as domiphen bromide. The precipitate was dissolved in aqueous HCl to produce H+ -type FA and a surfactant chloride (SUR-Cl). SUR-Cl, in the aqueous solution, was removed by extraction with CHCl3. After the aqueous phase was passed through a cation-exchanger (H+ -type), H+ -type FA (FA-SUR) was obtained as a powder by lyophylization. The chemical characteristics of FA-SUR were compared with an FA sample separated according to the method of the International Humic Substances Society using a DAX-8 resin (FA-DAX). The oxygen content, O/C atomic ratio and total acidity of the FA-SUR were significantly larger than the corresponding values for FA-DAX. The solid-state CPMS 13C NMR spectra indicated that the higher oxygen content of the FA-SUR could be due to alcoholic hydroxyl groups and polysaccharides as well as carboxylic groups. These results show that FA-SUR is more polar and hydrophilic than FA-DAX.     

Catalytic property of Europium supported on alumina from its ammoniacal solution

Europium supported on alumina (Eu/Al₂O₃) was prepared by impregnation from an ammoniacal solution of the metal. The catalytic activity of Eu/Al₂O₃ for the isomerization of 2,3-dimethylbut-1-ene to 2,3-dimethylbut-2-ene was examined. Eu/Al₂O₃ showed the highest catalytic activity for the isomerization when heated under a vacuum at 523 K, the yield of 2,3-dimethylbut-2-ene in 20 min being 81.6% at 314 K. IR spectrum shows the presence of two kinds of Eu amides. The change of the IR spectra and the catalytic activities with evacuation temperature suggest that only one of the two Eu amides is catalytically active for this base-catalyzed isomerization.     

Evaluation of Photocatalytic Activity of Transparent Anatase Nanocrystals-Dispersed Silica Films Prepared by the Sol-Gel Process with Hot Water Treatment

Anatase nanocrystals were precipitated mainly at the surface of the silica-titania gel films with hot water treatment, whereas the addition of poly(ethylene glycol) (PEG) in the films led to the dispersion of anatase nanocrystals in the whole of the films after the treatment. Both films with and without PEG showed high photocatalytic activities for acetaldehyde, NO _x and stearic acid in the gas-solid system, and for methylene blue and potassium iodide in the liquid-solid system. The addition of PEG improved the photocatalytic activities of the resultant films due to the smaller anatase crystallites and the porous film structure. The residual silica under-layer of the superficially anatase-precipitated films is expected to act as a protective one for an organic polymer substrate against the photocatalytic degradation.     

Effects of temperature and endogenous factors in blood on concentrations of cyclosporin in plasma measured by high-performance liquid chromatography

The effects of temperature, hematocrit (Hct), lipid level in plasma and cyclosporin A (CyA) level in whole blood on the concentration of CyA in plasma measured by high-performance liquid chromatography were studied in vitro. With rise in blood storage temperature before cells were removed, the concentration of CyA in plasma was increased in the temperature range between 10 degrees C and 37 degrees C, but was decreased between 4 degrees C and 10 degrees C. With rise in Hct, the concentration of CyA in plasma was decreased, and it was more markedly decreased at the blood storage temperature of 4 degrees C than at 37 degrees C. A lipid supplementation study showed that the concentration of CyA in plasma was increased with rise in plasma triglyceride level and in plasma cholesterol level at the storage temperature of 4 degrees C but not at 37 degrees C. Studies of the effect of CyA concentration in blood on the CyA distribution in blood demonstrated that the cellular/plasma concentration (C/P) ratio at low levels (less than 200 micrograms/ml) of plasma CyA ranged from 4 to 10 and was about 2 times higher than that at higher concentrations at 4 degrees C, but the ratio was relatively constant at 37 degrees C. The saturation capacity of the cellular fraction for CyA showed considerable individual variations, but there was no difference between the capacities at 4 degrees C and 37 degrees C. The separation of plasma after equilibration at 37 degrees C made it possible to avoid the variations in the distribution of CyA in whole blood associated with changes in Hct, lipid level in plasma and CyA level in whole blood, and to obtain a measurement reflecting the physiologically significant concentration of CyA in plasma.     

10B quantitative determination in ppb range by particle tracks reading for boron neutron capture therapy

Quantitative determination of ppb-order ¹⁰B was carried out in a small number of cultured tumor cells by particle tracks by the ₁₀B(n,)⁷Li reactions using solid state nuclear track detector (SSNTD) for boron neutron capture therapy research. The detection limit of ¹⁰B concentration in tumor cells is less than 1·10^-3 ppm under our experimental conditions which permits the quantitative determination of ¹⁰B in a small number of boronated tumor cells (10⁵/ml = ca. 0.1 mg). Boron quantities in tumor cells determined were well compatible with the tumor cell killing effects of boron neutron capture therapy.