Preparation of bow tie–type methacrylated poly(caprolactone‐co‐lactic acid) scaffolds: effect of collagen modification on cell growth

A branched methacrylated poly(caprolactone‐co‐lactic acid) and methacrylated poly(tetramethylene ether glycol) (PTMG‐IEM) resins were synthesized. ¹H‐NMR spectroscopy, attenuated total reflectance Fourier transform infrared spectroscopy (ATR‐FTIR) spectroscopy, and gel permeation chromatography confirmed the chemical structures of copolymers. The photoinitiated polymerization of formulation composed of various amounts of methacrylated poly(caprolactone‐co‐lactic acid), PTMG‐IEM, poly(ethylene glycol) diacrylate, water, and photoinitiator were performed. The curing reactions were followed by photo‐DSC (Differential scanning calorimetry). Gel fraction was calculated from the insoluble part and found as ≥93%. Swelling and contact angles were measured, and all increased with the increasing amount of PTMG‐IEM in network formulations. In vitro degradation studies were performed at 37 °C in phosphate‐buffered saline (pH 7.4). Collagen‐modified polymers were also prepared and introduced as a bioactive moiety to modify the polymer to enhance cell affinity. To compare the cell adhesion affinity to the polymer with and without collagen, cell growth experiments were performed. The results showed that collagen improves the cell adhesion onto the polymer surface. With the increasing amount of collagen, cell viability increases 86% (ECV304, p < 0.05) and 83% (3 T3, p < 0.05). Copyright © 2011 John Wiley & Sons, Ltd.     

Design,synthesis, photochromism and electrochemistry of a novel material with pendant photochromic units

In the present work, the synthesis, photochromism and electrochemistry of a novel material 1, 1-(4-[3,4-bis(2,5-dimethyl-3-thienyl)cyclopent-3-en-1-yl]phenyl)-2,5-di-2-thienyl-1H-pyrrole, with pendant dithienylethene (DTE) photochromic units are described. It should be noted that the system 1 can be reversibly and efficiently switched between open (1o) and closed (1c) states by light in both solution and in the solid poly(methyl methacrylate) matrix. It is also noteworthy that the two isomers (1o and 1c) of this novel system 1 can be smoothly polymerized on ITO by electrochemical means. Surprisingly, the DTE unit in 1 does not retain its photochemical switching properties after immobilization onto ITO. The morphology of the polymer film was investigated by AFM analysis. Furthermore, it was found that the polymer exhibited remarkable electrochromic features that can be switched from green in the neutral state to violet state under applied external potentials without disturbing the photochromic units.     

Photopolymerized injectable RGD-modified fumarated poly(ethylene glycol) diglycidyl ether hydrogels for cell growth

In this study, photopolymerized hydrogels of fumarated poly(ethylene glycol) diglycidyl-co- poly(ethylene glycol) diacrylate have been synthesized and modified with cell adhesion peptide, Arg-Gly-Asp (RGD). The structural and mechanical properties of the hydrogels are found to be poly(ethylene glycol) diacrylate (PEGDA) dependent. The percentage of gelation is increased from 72 to 89 wt.-% when the amount of the crosslinker co-monomer (PEGDA) in the hydrogel formulation is increased from 20 to 40 wt.-%. In the present case, the equilibrium mass swelling is decreased from 216 to 93%. The viscosities of the uncured formulations have also been measured and likewise, the results were influenced by the increasing amount of PEGDA that reduced the value from 83 to 36 cP. The compressive modulus of the prepared hydrogels was improved with the addition of the PEGDA. Cell growth experiments have been performed by comparing the properties of the hydrogels with and without RGD units. The results show that RGD units enhance the adhesion of cells to the surface of the hydrogels. SEM-EDS studies reveal that nitrogen and calcium are produced on the osteoblast-seeded surface of the scaffold within the culture time period. [Figure: see text].     

Poly(p‐phenylene methylene)‐based block copolymers by mechanistic transformation

The synthesis of poly(p‐phenylene methylene) (PPM)‐based block copolymers such as poly(p‐phenylene methylene)‐b‐poly(ε‐caprolactone) and poly(p‐phenylene methylene)‐b‐polytetrahydrofuran by mechanistic transformation was described. First, precursor PPM was synthesized by acid‐catalyzed polymerization of tribenzylborate at 16 °C. Then, this polymer was used as macroinitiators in either ring‐opening polymerization of ε‐caprolactone or cationic ring‐opening polymerization of tetrahydrofuran to yield respective block copolymers. The structures of the prepolymer and block copolymers were characterized by GPC and ¹H NMR investigations. The composition of block copolymers as determined by ¹H NMR and TGA analysis was found to be in very good agreement. The thermal behavior and surface morphology of the copolymers were also investigated, respectively, by differential scanning calorimetry and atomic force microscopy measurements, and the contribution of the major soft segment has been observed. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Soluble alkyl substituted poly(3,4‐propylenedioxyselenophene)s: A new platform for optoelectronic materials

Optical and electrochemical properties of regiosymmetric and soluble alkylenedioxyselenophene‐based electrochromic polymers, namely poly(3,3‐dibutyl‐3,4‐dihydro‐2H‐selenopheno[3,4‐b][1,4]dioxephine) (PProDOS‐C₄), poly(3,3‐dihexyl‐3,4‐dihydro‐2H‐selenopheno[3,4‐b][1,4]dioxephine) (PProDOS‐C₆), and poly(3,3‐didecyl‐3,4‐dihydro‐2H‐selenopheno[3,4‐b][1,4]dioxephine) (PProDOS‐C₁₀), are highlighted. It is noted that these unique polymers have low bandgaps (1.57–1.65 eV), and they are exceptionally stable under ambient atmospheric conditions. Polymer films retained 82–97% of their electroactivity after 5000 cycles. The percent transmittance of PProDOS‐C_n (n = 4, 6, 10) films found to be between 55 and 59%. Furthermore, these novel soluble PProDOS‐C_n polymers showed electrochromic behavior: a color change form pure blue to highly transparent state in a low switching time (1.0 s) during oxidation with high coloration efficiencies (328–864 cm² C^?1) when compared to their thiophene analogues. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and characterization of liquid crystalline tetra- and octa-substituted novel phthalocyanines

Methylene-bridged tetra- and octa-(13,17-dioxa nonacosane-15 sulfanyl)-substituted metal free- and Ni(II) phthalocyanines were synthesized from the corresponding phthalonitrile (3, 4) derivatives in the presence of the anhydrous metal salt (NiCl₂) or a strong organic base. The new compounds were characterized by elemental analyses, UV/Vis, IR, NMR and mass spectra. The mesogenic properties of these materials were studied by differential scanning calorimetry (DSC), optical microscopy and X-ray diffraction investigations. X-ray diffraction patterns of the mesophase confirm that tetra- and octa-substituted compounds (3a–b, 4a–b) form hexagonal columnar mesophases (Col_h). We indicated that addition of the methylene-bridged phthalocyanine (Pc) core can either decrease the liquid crystal phase transition temperatures or extend the liquid crystal temperature range to include room temperature. Also, the Pc compounds (3a, 3b, 4a and 4b) are liquid crystals at room temperature. These properties of the Pc complexes provide some advantages such as easily obtaining an ordered film for sensor applications. Computational modelling work was combined with X-ray diffraction investigation to validate the diameter of the phthalocyanine molecule (3b).     

Role of polydimethylsiloxane in properties of ternary materials based on polyimides containing zeolite Y

Mixed matrix materials, containing poly(dimethylsiloxane), phosphine oxide-based polyimide, and zeolite Y were prepared by means of blending hybridisation. The thermal stability of the materials and the hydrophobic properties were enhanced. The decrease in the glass transition temperature of the materials with the increase in poly(dimethylsiloxane) content supported the polymer-chain flexibility. The pristine polyimide and the zeolite-filled polyimide exhibited the highest transparency. Fourier transform infrared (FTIR) spectroscopy confirmed that the increase in the amount of the lowest molecular mass poly(dimethylsiloxane) ingredient indicated strong alkyl and Si-O-Si stretching modes, whilst the alkyl and Si-O-Si stretching intensity decreased in the presence of the highest amount of and the highest molecular mass poly(dimethylsiloxane). The hydrophobic poly(dimethylsiloxane) moiety created an inverse relationship between the porosity of the materials (surface roughness) and the hydrophilicity. The nanocrystallite domain, identified by X-ray diffraction analysis (XRD) and possessing an exotherm crystallisation peak, occurred in the lowest amount of poly(dimethylsiloxane) with the highest molecular mass-based hybrid material. The nanocrystallite enhanced the storage modulus as determined by the dynamic mechanical analyser (DMA). The nanocrystalline formation resulted in a slight increase in the alkyl stretching and the Si-O-Si stretching of the lowest amount of and the highest molecular mass poly(dimethylsiloxane)-containing material over those of the lowest molecular mass poly(dimethylsiloxane) in the same amounts of material involved.     

Orthogonal Synthesis of Block Copolymer via Photoinduced CuAAC and Ketene Chemistries

A novel route for the synthesis of poly(ethylene glycol)‐b‐polystyrene copolymer, starting from commercially available poly(ethylene glycol) methyl ether and azido terminated polystyrene prepared by atom transfer radical polymerization and subsequent nucleophilic substitution, is applied with simplicity and high efficiency. The combination of photoinduced copper (I)‐catalyzed alkyne‐azide cycloaddition (CuAAC) and ketene chemistry reactions proceeds either simultaneously or sequentially in a one‐pot procedure under near‐visible light irradiation. In both cases, excellent block copolymer formations are achieved, with an average molecular weight of around 7000 g mo1⁻¹ and a polydispersity index of 1.20.

     

Photoconductive novel mesomorphic oxotitanium phthalocyanines

The synthesis and photoconductivity properties of the alkylthia and triethyleneoxysulfonyl substituted oxotitanium(IV) phthalocyanines (1a and 2a) are reported for the first time. The new compounds have been characterized by elemental analysis, IR, ¹H and ¹³C NMR spectroscopy, electronic spectroscopy and mass spectroscopy. The mesogenic properties of these new materials were studied by differential scanning calorimetry and optical microscopy. The electrical dark conductivities (σ_d) and photoconductivities (σ_ph) of deposited films of 1a and 2a were investigated in various media with different concentrations of oxygen. Molecular oxygen increases photoconductivities (σ_ph) significantly. The photoconductivity mechanism and formation of Pc⁺ which is positive charge carrier under the light irradiation of the phthalocyanine molecules are demonstrated using the theoretical calculations. The geometries of the oxotitanium(IV) phthalocyanines (TiOPc) are optimized with PM3 semi-empirical method, and their visible absorption maxima are calculated with ZINDO/S method. The results agree well with the observed values. It was found that for the calculation of visible absorption of neutral and positively charged substituted TiOPc molecules using ZINDO/S method could rapidly yield excellent results. Dipole moment, HOMO, LUMO energies and atomic charges are also calculated for clarification of the oxygen effect on the photoconductivity using PM3 and ZINDO/S methods.