Adsorption of some toxic elements from water samples on modified activated carbon,activated carbon and red soil using neutron activation analysis

A simple and sensitive method for the determination of some metalloids and heavy metals in water samples is presented. The method is based on the preconcentration of the attachment of chelating functionalities with metalloids and toxic metals irreversibly and targeted towards toxic metals adsorbed on modified activated carbon, activated carbon and red soil particles at pH 3.0–9.0±0.2, followed by quantitative determination using instrumental neutron activation analysis (INAA), on the absorbers. Attachment results from attraction that may be physical, chemical, electrical, or a combination of all three. The efficient removal of metalloids and toxic metals, especially arsenic, chromium and mercury is anticipated. The adsorption capacity of the chemically modified activated carbon materials was evaluated for the above mentioned metalloid and toxic metal ions in the presence of iron ions and simulated water samples. Red soil particles containing iron was utilized in the control of oxidation-reduction reaction with metalloids and toxic metals. The preconcentration of the elements of interest on red soil particles, activated carbon and modified activated carbon at different depths, pH and oxidation states was investigated. The results obtained showed good agreement with certified values giving relative errors of less than 10%.     

The preparation and some reactions of 2, 3, 5, 6-tetrachlorophenylmagnesium chloride

The reaction of pentachlorobenzene with metallic magnesium in THF at 10–15°C gives after hydrolysis 1, 2, 4, 5-tetrachlorobenzene (76%) and pentachlorobenzene (8%); after trimethylsilylation, 1, 2, 4, 5-tetrachloro-3-(trimethylsilyl)benzene (74%), pentachloro(trimethylsilyl)benzene (8%) and 1, 2, 4, 5-tetrachlorobenzene (6%); after iodination, 1, 2, 4, 5-tetrachloroiodobenzene (44%), pentachloroiodobenzene (12%) and 1, 2, 4, 5-tetrachlorobenzene (9%); and finally after carbonation, 2, 3, 5, 6-tetrachlorobenzoic acid (58%). These products indicate that in the Grignard reaction a mixture of largely 2, 3, 5, 6-tetrachlorophenylmagnesium chloride and some pentachlorophenylmagnesium chloride is formed. The formation pentachlorophenylmagnesium chloride is explained on the basis of metal—hydrogen exchange reaction between 2, 3, 5, 6-tetrachlorophenylmagnesium chloride and the unreacted pentachlorobenzene.     

The preparation and characterization of mono- and bis-chelated cadmium(II) complexes of the di-2-pyridylketone Schiff base of S-methyldithiocarbazate (Hdpksme) and the X-ray crystal structure of the [Cd(dpksme)2] · 0.5 MeOH complex

New cadmium(II) complexes of empirical formulae, [Cd(dpksme)X] (dpksme = anionic form of the Schiff base; X = NCS^–, Cl^–, I^–) and [Cd(dpksme)₂] · 0.5MeOH, respectively have been prepared and characterized. The mono-ligated cadmium(II) complexes, [Cd(dpksme)X] are four-coordinate and tetrahedral but the bis-ligand complex, [Cd(dpksme)₂] · 0.5MeOH is six-coordinate and octahedral. The crystal and molecular structure of [Cd(dpksme)₂] · 0.5MeOH has been determined by X-ray diffraction. The complex has a distorted mer-octahedral structure in which the ligands are coordinated as uninegatively charged tridentate chelating agents via the pyridine nitrogen atoms, the azomethine nitrogen atoms and the thiolate sulfur atoms. The distortion from regular octahedral geometry is ascribed to the restricted bite angles of the ligands. The Schiff base and its cadmium(II) complexes exhibit mild antibacterial activities against Shigella dysenteriae, Bacillus cereus, Staphylococcus aureus and Escherichia coli. They are also mildly fungitoxic against the phytopathogenic fungi, Alternaria alternata and Macrophomina phaseolina.     

Photochemical reactions of metal carbonyls [M(CO)6 (M = Cr,Mo and W), Re(CO)5Br,Mn(CO)3Cp] with 2-hydroxyacetophenone methanesulfonylhydrazone (apmsh)

Five new complexes, [M(CO)₅(apmsh)] [M = Cr; (1), Mo; (2), W; (3)], [Re(CO)₄Br(apmsh)] (4) and [Mn(CO)₃(apmsh)] (5) have been synthesized by the photochemical reaction of metal carbonyls [M(CO)₆] (M = Cr, Mo and W), [Re(CO)₅Br], and [Mn(CO)₃Cp] with 2-hydroxyacetophenone methanesulfonylhydrazone (apmsh). The complexes have been characterized by elemental analysis, mass spectrometry, f.t.-i.r. and ¹H spectroscopy. Spectroscopic studies show that apmsh behaves as a monodentate ligand coordinating via the imine N donor atom in [M(CO)₅(apmsh)] (1–4) and as a tridentate ligand in (5).     

Spectrophotometric determination of trimethoprim by oxidation in drug formulations

A spectrophotometric determination of trimethoprim is described based on the reaction of its amine group with persulfate which acts as a strong oxidizing agent in alkaline media. The reaction produces a stable yellow colored compound after heating in a boiling water bath for 30 min. At λ_max 355 nm, Beer’s law is obeyed in the concentration range 10–60 μg ml^–1 with a molar absorptivity of 2.7 × 10³ l mol^–1cm^–1. The method is applied to formulations with sulfamethoxazole. Received: 30 July 1996 / Revised: 16 October 1996 / Accepted: 22 October 1996     

Development and Validation of Kinetic Spectrophotometric Method for the Determination of Losartan Potassium in Pure and Commercial Tablets

A validated kinetic spectrophotometric method has been developed for the determination of losartan potassium in pure and dosage forms. The method is based on oxidation of the losartan potassium with alkaline potassium permanganate at room temperature (25 ± 1 °C). The reaction is followed spectrophotometrically by measuring the increase in absorbance with time at 603 nm, and the initial rate, fixed time (at 12.0 min) and equilibrium time (at 90.0 min) methods are adopted for constructing the calibration graphs. All the calibration graphs are linear in the concentration range of 7.5–60.0 μg mL^?1 and the calibration data resulted in the linear regression equations of n? = ?6.422 × 10^?7 + 1.173 × 10^?5 C, A =3.30 × 10^?4 + 5.28 × 10^?3 C and A = ?2.09 × 10^?2 + 1.05 × 10^?1 C for initial‐rate, fixed time and equilibrium time methods, respectively. The limits of detection for initial rate, fixed time and equilibrium time methods are 0.71, 0.21 and 0.19 μg mL^?1, respectively. The activation parameters such as E_a, ΔH^?, ΔS^?, and ΔG^? are also determined for the reaction and found to be 87.34 KJ mol^?1, 84.86 KJ mol^?1, 50.96 JK^?1 mol^?1 and ?15.10 KJ mol^?1, respectively. The variables are optimized and the proposed methods are validated as per ICH guidelines. The method has been applied successfully to the estimation of losartan potassium in commercial tablets. The performance of the proposed methods was judged by calculating paired t‐ and F‐ values. The analytical results of the proposed methods when compared with those of the reference method show no significant difference in accuracy and precision and have acceptable bias.     

Nanostructured graded-index antireflection layer formation on GaN for enhancing light extraction from light-emitting diodes

We describe the fabrication and characterization of a randomly etched gallium nitride (GaN) surface for enhancing light extraction from light-emitting diodes. Our technique uses silica spheres as nano-targets in a sputter-etch process and produces a fine-grained surface with features around 35 nm. The textured surface layer acts as a graded refractive index layer with antireflection properties. Measurements show that photoluminescence intensity from such treated surfaces on a GaN LED wafer increases 2.2?times over that from pristine surfaces. These findings are also supported by computer modelling studies described here.     

Performance investigation of an advanced tracked prime mover on the low bearing soil

This study has presented a performance investigation of an advanced tracked prime mover for the operation of agricultural goods and other operations on peat terrain. The maximum and continuous traction torque of the prime mover has been developed by designing an advanced controller for controlling the intelligent system. The prime mover’s mobility is studied with ultrasonic displacement sensor, torque transducer, National Instrument cRIO-9004 Compact-RIO Real-time Controller Unit (RCU), a National Instrument TPC 2106T Touch Panel Control (TPC), a Trimble AG132 GPS antenna and receiver unit, and a Dlink DIR-655 router. The fuzzy logic controller (FLC) has been equipped with the prime mover hydraulic system to increase the traction torque of the hydraulic motor when the prime mover’s sinkage is more than or equal to 70 mm. The prime mover’s design demonstrates good potential in traversing peat terrain as the measured tractive effort was found to be 48% of the vehicle’s gross weight while the recommended tractive effort is in the range of 30–36% of the vehicle’s gross weight.     

Amphitropic liquid crystals. Two lamellar phases in a surfactant containing thermotropic and lyotropic mesogenic groups

Abstract

We have studied the lyotropic liquid-crystalline behaviour of cationic surfactants containing a potentially thermotropic moiety, a terminal cyanobiphenyloxy group. Both mono-alkyl and mid-chain substituted dialkyl surfactants have been examined using optical microscopy and NMR spectroscopy. Incorporation of the cyanobiphenyloxy group destabilizes the hexagonal and bicontinuous cubic phases, with only an extensive lamellar region being observed. For the dialkyl surfactant there is a range of compositions where two lamellar phases co-exist, one water-rich and the second surfactant-rich.