Rapid analysis of N‐linked oligosaccharides in glycoproteins (ovalbumin,ribonuclease B and fetuin) by reversed‐phase ultra‐performance liquid chromatography with fluorescence detection and electrospray ionization time‐of‐flight mass spectrometry

Rapid, selective and sensitive determination of N‐linked oligosaccharides in glycoproteins (ovalbumin, ribonuclease B and fetuin) was performed by ultra‐performance liquid chromatography (UPLC) with fluorescence (FL) and electrospray ionization time‐of‐flight mass spectrometry (ESI‐TOF‐MS). The asparaginyl‐oligosaccharide moiety was first liberated from each glycoprotein by pronase E (a proteolitic enzyme). The oligosaccharide fractions separated by gel‐permeation chromatography were labeled with 1‐pyrenesulfonyl chloride (PSC, a fluorescence reagent), separated by UPLC in a short run time, and then detected by FL and TOF‐MS. The PSC‐labeled oligosaccharides were selectively identified from the FL detection and then sensitively determined by ESI‐TOF‐MS. As the results, 15, eight and four kinds of N‐linked oligosaccharides were detected from ovalbumin, ribonuclease B and fetuin, respectively. Because the present method is rapid (within 9 min), selective and sensitive (approximate 60 fmol, S/N = 5), the determination of N‐linked oligosaccharides in various glycoproteins seems to be possible. Copyright © 2008 John Wiley & Sons, Ltd.     

A Biosensor Composed of Glucose Oxidase‐Containing Liposomes and MnO2‐Based Layered Nanocomposite

Glucose oxidase (GOD) was encapsulated in liposomes, and then the GOD‐containing liposomes were immobilized to a MnO₂‐based multilayered nanocomposite film grown electrochemically. Oxidation of glucose took place on the encapsulated GOD in the manganese oxide film, and the generated H₂O₂ molecules were oxidized catalytically at high valent Mn sites (4+) in the film. Anodic currents due to reoxidation of the reduced Mn ions (3+) were in proportion to the concentration of glucose from 19.6 to 107.1 mM. Such a simple construction of biosensor is applicable to a variety of combinations of liposomal enzymes and substrates.     

Dose distribution of carbon ions in air assessed using imaging plates and ionization chamber

A system to expose biological specimens to medium-energy (2.6–6.0  MeV/u) irradiation has been developed at the NIRS-HIMAC. In order to determine the beam energy or LET at the irradiation position in air, the dose distribution for 6.0  MeV/u carbon beam has been obtained using a secondary electron monitor and a flat-type ionization chamber by using air as the energy absorber. Imaging plates were applied to assess the beam profile distribution. The intensity of photo-stimulated luminescence (PSL) was found to be almost proportional to the energy deposited within the sensitive layer of the imaging plate. It has been confirmed that a uniform irradiation field can be produced (about ±5% within 20 mm in diameter) at low-intensity exposure from 10¹ to . Long-term beam stability in the low-intensity condition has also been demonstrated. As a consequence, the methodology for uniform, stable and low-intensity beam exposure has been established, and the continuously variable linear energy transfer (LET) values have also been obtained by changing the distance from the endcap of beamport, for biological studies.     

Solid‐supported synthesis of well‐defined amphiphilic block copolymer from methacrylates

A new facile method for preparation of an amphiphilic block copolymer via a one‐pot sequential atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) and 2‐hydroxyethyl methacrylate (HEMA) on solid support was developed. As a model homopolymerization for the solid‐supported block copolymerization, ATRPs of MMA and HEMA in toluene and in 2‐butanone/1‐propanol solvent system were carried out, respectively. Crosslinked polystyrene beads bearing 2‐bromoisobutyrate moieties successfully initiated the polymerizations of MMA and HEMA in controlled manner. On the basis of the successful results, the one‐pot synthesis of amphiphilic block copolymer by changing the reaction medium was performed. After the ATRP of MMA in toluene at 90 °C for 1 h, the poly(MMA) formed on the beads were washed by continuous flow of 2‐butanone/1‐propanol under nitrogen with the aid of a glass filter in a U‐shaped glass vessel. Then, 2‐butanone/1‐propanol, copper chloride (I), 2,2′‐bipyridyl, and HEMA were added and heated at 50 °C for 48 h with shaking the vessel, followed by treatment with trifluoroacetic acid to isolate the well‐defined amphiphilic block copolymer, poly(MMA‐b‐HEMA). These demonstrated the feasibility of the present strategy for well‐defined synthesis of amphiphilic block copolymers via a one‐pot procedure. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1990–1997, 2008     

Field determination of trace iron in fresh water samples by visual and spectrophotometric methods.

Sensitive visual and micro spectrophotometric methods have been developed for field determination of trace iron in fresh water samples. For the visual method, a water sample (0.45-microm filtrate acidified to 0.1 M HCl) was placed in a glass vial and mixed with a reagent solution containing 1,10-phenanthroline, sodium thiocyanate and 0.1 M HCl. Iron was extracted as pink ferroin thiocyanate with 1 ml of 4-methy-2-pentanone. The sample up to 20 ml was added step-by-step, until the color of the extract was detected visually. Without any special instrument or color standard, iron down to 0.001 mg 1(-1) (0.025 microg) in a sample can be determined with an error of 20% in the field. For the micro spectrophotometric method, the extract for 20 ml of sample was separated by capillary suction in a column (micro pipette chip) with acrylic fibers. A part of the extract was pushed out into a micro cell for the absorbance measurement at 525 nm. The column was re-usable after washing with ethanol. This method had a detection limit of 0.001 mg 1(-1) and allowed determinations within an error of 5%. The proposed methods were applied to deionized-, tap-, river-, lake- and reservoir-water samples.     

Photoluminescence of samarium-doped TiO2 nanotubes

Samarium (Sm)-modified TiO₂ nanotubes (TNTs) were synthesized by low-temperature soft chemical processing. X-ray powder diffraction analyses of the synthesized Sm-doped and non-doped TNTs show a broad peak near 2θ=10°, which is typical of TNTs. The binding energy of Sm ³d_5/2 for 10 mol% Sm-doped TNT (1088.3 eV) was chemically shifted from that of Sm₂O₃ (1087.5 eV), showing that Sm existed in the TiO₂ lattice. Sm-doped TNTs clearly exhibited red fluorescence, corresponding to the doped Sm³⁺ ion in the TNT lattice. The Sm-doped TNT excitation spectrum exhibited a broad curve, which was similar to the UV–vis optical absorption spectrum. Thus, it was considered that the photoluminescence emission of Sm³⁺-doped TNT with UV-light irradiation was caused by the energy transfer from the TNT matrix via the band-to-band excitation of TiO₂ to the Sm³⁺ ion.