Synthesis of protected α-alkyl lanthionine derivatives

Protected α-alkyl lanthionine derivatives were synthesized in five steps starting from a known phenyloxazoline precursor. This approach involved the synthesis of a family of substituted cyclic sulfamidates and their regioselective opening by nucleophilic attack with a protected cysteine. This efficient multistep strategy affords various α-alkylated lanthionine derivatives in high yields.     

Simultaneous determination of 14 sulfonamides and tetracyclines in biogas plants by liquid-liquid-extraction and liquid chromatography tandem mass spectrometry

A new method for the analysis of sulfonamides and tetracyclines in heterogenic biogas plant input samples and fermentation residues is introduced. Veterinary antibiotics are only partially absorbed in the animal gut; therefore, animal manure can contain high loads of these substances. Animal manure is used for biogas generation, so antibiotics can enter the anaerobic fermentation process this way. However, only little is known about the fate of antibiotics within this process, also due to the lack of suitable analytical methods for this complex sample matrix. Therefore, we developed a method for the analysis of ten sulfonamides (sulfachloropyridazine, sulfadiazine, sulfadimethoxine, sulfaguanidine, sulfamerazine, sulfamethazine, sulfamethoxazol, sulfamethoxypyridazin, sulfapyridine, sulfathiazole) and four tetracyclines (chlortetracycline, doxycycline, oxytetracycline, tetracycline) in biogas plant input and output samples, including a single liquid-liquid-extraction step and analysis via liquid chromatography (LC) and triple quadrupole mass spectrometry. The detection limit of this method ranges from 0.01 to 0.08 mg kg^?1. Matrix calibration using antibiotic-free cattle feces and isotopic-labeled internal standards enables quantification of antibiotics in different matrices such as animal manure, dung, or fermenter outputs with recovery rates between 70 and 130 %. This makes the method suitable for investigating the fate of antibiotics in animal manure and fermentation processes. A screening of 15 German biogas plants revealed the presence of several antibiotics up to 9 mg kg^?1 (201 mg kg^?1 dry matter). During the fermentation process, elimination occurs; however, with the exception of chlortetracycline, the antibiotic content remains in the same order of magnitude.

Directed flow from global symmetry and initial state Fluctuations

Collective flow is studied in a 3+1D fluid dynamical model with globally symmetric, peripheral initial conditions, taking into account the shear flow. At $\sqrt {s_{NN} } $ = 2.76 TeV in semi-peripheral Pb+Pb collisions this leads to rotation, while at more peripheral collisions with high resolution and low numerical viscosity, the initial development of a Kelvin-Helmholz instability is observed. This effect provides a precision tool for studying the viscosity of Quark-Gluon Plasma.     

Self-assembled molecular rafts at liquid|liquid interfaces for four-electron oxygen reduction

The self-assembly of the oppositely charged water-soluble porphyrins, cobalt tetramethylpyridinium porphyrin (CoTMPyP(4+)) and cobalt tetrasulphonatophenyl porphyrin (CoTPPS(4-)), at the interface with an organic solvent to form molecular "rafts", provides an excellent catalyst to perform the interfacial four-electron reduction of oxygen by lipophilic electron donors such as tetrathiafulvalene (TTF). The catalytic activity and selectivity of the self-assembled catalyst toward the four-electron pathway was found to be as good as that of the Pacman type cofacial cobalt porphyrins. The assembly has been characterized by UV-visible spectroscopy, Surface Second Harmonic Generation, and Scanning Electron Microscopy. Density functional theory calculations confirm the possibility of formation of the catalytic CoTMPyP(4+)/ CoTPPS(4-) complex and its capability to bind oxygen.     

Kinetic aspects of hollow fiber liquid-phase microextraction and electromembrane extraction

In this paper, extraction kinetics was investigated experimentally and theoretically in hollow fiber liquid-phase microextraction (HF-LPME) and electromembrane extraction (EME) with the basic drugs droperidol, haloperidol, nortriptyline, clomipramine, and clemastine as model analytes. In HF-LPME, the analytes were extracted by passive diffusion from an alkaline sample, through a (organic) supported liquid membrane (SLM) and into an acidic acceptor solution. In EME, the analytes were extracted by electrokinetic migration from an acidic sample, through the SLM, and into an acidic acceptor solution by application of an electrical potential across the SLM. In both HF-LPME and EME, the sample (donor solution) was found to be rapidly depleted for analyte. In HF-LPME, the mass transfer across the SLM was slow, and this was found to be the rate limiting step of HF-LPME. This finding is in contrast to earlier discussions in the literature suggesting that mass transfer across the boundary layer at the donor–SLM interface is the rate limiting step of HF-LPME. In EME, mass transfer across the SLM was much more rapid due to electrokinetic migration. Nevertheless, mass transfer across the SLM was rate limiting even in EME. Theoretical models were developed to describe the kinetics in HF-LPME, in agreement with the experimental findings. In HF-LPME, the extraction efficiency was found to be maintained even if pH in the donor solution was lowered from 10 to 7–8, which was below the pK_a-value for several of the analytes. Similarly, in EME, the extraction efficiency was found to be maintained even if pH in the donor solution increased from 4 to 11, which was above the pK_a-value for several of the analytes. The two latter experiments suggested that both techniques may be used to effectively extract analytes from samples in a broader pH range as compared to the pH range recommended in the literature.     

Study on the reversible changes of the surface properties of an L-cysteine self-assembled monolayer on gold as a function of pH

A stimuli-response biological surface of L-cysteine was prepared on a polycrystalline gold surface from aqueous solution. The effect of the pH value of the rinsing solution on the surface composition was studied with X-ray photoelectron spectroscopy (XPS). Qualitative and quantitative analysis of the amino, carboxyl, and thiol functional groups of these self-assembled monolayers indicate that L-cysteine molecules exist in the neutral and zwitterionic forms and that they are sensitive to the pH of the rinsing solution. In addition, the wetting properties of the functionalized surface were studied by contact angle (CA) analysis: they were also dependent on the pH of the rinsing solution. Furthermore, it was shown that this functionalization process was reversible.     

Stacey Crossed Products Associated to Exel Systems

There are many different crossed products by an endomorphism of a C*-algebra, and constructions by Exel and Stacey have proved particularly useful. Here we consider Exel crossed products associated to transfer operators which extend to be unital on the multiplier algebra. We show that every Exel crossed product is isomorphic to a Stacey crossed product, though by a different endomorphism of a different C*-algebra. We apply this result to a variety of Exel systems, including those associated to shifts on the path spaces of directed graphs.     

Stable polymethacrylate nanocapsules from ultraviolet light-induced template radical polymerization of unilamellar liposomes

We employed UV-induced template polymerization to create hollow nanometer-sized polymer capsules. Homogeneous, unilamellar liposomes served as a two-dimensional template for the cross-linking of either butyl methacrylate or hydroxyethyl methacrylate with the bifunctional ethyleneglycol dimethacrylate. Different molar ratios of lipid/hydrophobic monomer/bifunctional monomer/photoinitiator were tested and dynamic light scattering revealed negligible changes of size at a defined molar ratio of 2/1/10/20, respectively. Cryo-transmission electron microscopy provided clear evidence that incorporation of the methacrylate monomers into and polymerization in the hydrophobic bilayer phase does not disrupt vesicle integrity. Moreover, after solubilization of the lipids, the polymethacrylate nanocapsules were stable at conditions needed for negative staining and could be visualized by atomic force microscopy. In contrast to previous findings, the nanocapsule size and shape did not change considerably after removal of the template phase, and the size distribution remained strictly monomodal. The employed method is not only an advance to fortify liposomes, but the nanocapsules themselves can be functionalized.     

Photochemically driven shape changes of crystalline organic nanorods

Nanorods composed of 9-tert-butylanthroate (9-TBAE) are synthesized using an Al2O3 template and solvent annealing. The rods consist of micron-scale crystalline domains, and UV light induces a [4 + 4] photodimerization that results in a uniform 15% expansion along the rod axis. This is in contrast to random 9-TBAE crystals, which disintegrate under the same conditions. Transmission electron microscopy, atomic force microscopy, and comparison of the X-ray crystal structures of the monomer and photodimer all provide evidence for a mechanism based on a crystal-to-crystal photoreaction leading to an increase in molecular volume. It is likely that the high surface-to-volume ratio in the nanorods provides a strain relief pathway that is absent in larger crystals. Preliminary attempts to reverse the reaction using shorter wavelength light to photodissociate the dimers were only partly successful. These results suggest that crystalline organic nanostructures may provide an efficient way to transform photochemical energy into mechanical motion on the nanometer scale.