Density fluctuations in amorphous and semicrystalline polymers

Summary The small-angle scattering of amorphous and semicrystalline polymers contains an intensity component due to density fluctuations within the crystalline and amorphous domains.For amorphous polymers, the density fluctuations aboveT _g correspond to the theoretical value for a fluid system in thermodynamic equilibrium. BelowT _g , a temperature dependence proportional to T is observed over a range of about 50°. At lower temperatures, a linear relationship with a smaller slope has been found which extrapolates to a non-zero value at 0 °K. This value corresponds to the frozen-in disorder, the slope at low temperatures is related to thermal vibrations and can be evaluated in terms of photon-phonon scattering.Semicrystalline polymers show a temperature dependence of the density fluctuation similar to that of the amorphous polymers. At constant temperature the density fluctuations vary linearly with crystallinity.Natural rubber shows an increase of the density fluctuations with increasing cross-linking densities from which information on the density changes in the vicinity of a cross-link and on the statistics of the distribution of cross-linking can be obtained.

---

Zusammenfassung Die Kleinwinkelstreuung amorpher und teilkristalliner Polymere besitzt eine Intensitätskomponente, die von Dichtefluktuationen innerhalb der kristallinen und amorphen Bezirke herrührt. Für amorphe Polymere entspricht die Dichtefluktuation oberhalb vonT _g dem theoretischen Wert für ein fluides System im thermodynamischen Gleichgewicht. UnterhalbT _g wird eine Temperaturabhängigkeit proportional zuT über einen Bereich von etwa 50° beobachtet. Bei tieferen Temperaturen wird eine lineare Beziehung mit einer geringeren Steigung gefunden, welche zu einem endlichen Wert bei 0 °K extrapoliert werden kann. Dieser Wert bezieht sich auf die eingefrorene Fehlordnung, die Steigung bei tiefen Temperaturen ist auf thermische Schwingungen zurückzuführen und kann als Photon-Phonon-Streuung ausgewertet werden.Teilkristalline Polymere zeigen eine Temperaturabhängigkeit der Dichtefluktuation, die der von amorphen Polymeren ähnlich ist. Bei konstanter Temperatur ändert sich die Dichtefluktuation linear mit der Kristallinität.Naturkautschuk zeigt eine mit der Vernetzungsdichte ansteigende Dichtefluktuation, aus der man Information über die Dichteänderung in der Umgebung eines Netzpunktes und die Statistik der Netzpunktverteilung erhalten kann.

     

Absolute infrared intensities of hydrocarbons

Dipole-moment derivatives, calculated by both the CNDO/2 method with different parameterizations and the INDO method, are compared to the experimental values determined from absolute infrared intensity measurements for the IR active modes of methane, ethane, ethylene and acetylene. A parameter refinement procedure is introduced in which the CNDO/2 molecular orbital parameters are adjusted through a damped least-squares treatment to give best agreement with the observed dipole-moment derivatives. It is found that the refinement does not substantially improve the agreement obtained with the original CNDO/2 parameterization. The INDO method gives somewhat poorer agreement than the CNDO/2 calculations. As an example of the applicability of the molecular orbital methods toward reproducing relative infrared intensities, the spectrum of cyclopropane in the gasphase is examined.

---

Zusammenfassung Die Ableitungen des Dipol-Moments, die nach der CNDO/2-Methode mit verschiedenen Parametrisierungen sowie der INDO-Methode berechnet wurden, werden mit den experimentellen Ergebnissen aus Messungen der absoluten Infrarot-Intensitäten für die IR-aktiven Schwingungen von Methan, Äthan, Äthylen und Azetylen verglichen. Die CNDO/2-Parameter werden mit einer Methode der kleinsten Quadrate den beobachteten Dipol-Moment-Ableitungen angepaßt. Die Ergebnisse sind jedoch nicht wesentlich von denen der ursprünglichen CNDO/2-Methode verschieden. Die INDO-Ergebnisse sind nicht so gut wie die CNDO/2-Ergebnisse. Als Beispiel der Anwendbarkeit der MO-Methoden zur Berechnung von relativen IR-Intensitäten wird das Spektrum des Cyclopropans in der Gasphase untersucht.

---

Résumé Les dérivées du moment dipolaire, calculées par la méthode CNDO/2 avec différentes paramétrisations et par la méthode INDO, sont comparées aux valeurs expérimentales déterminées à partir de mesures d'intensité absolue pour les modes actifs dans l'infra-rouge dans le méthane, l'éthane, l'éthylène et l'acétylène. Les paramètres sont ajustés de manière à donner le meilleur accord avec les dérivées du moment dipolaire. Cet ajustement n'améliore pas sensiblement l'accord obtenu avec la paramétrisation CNDO/2 originale. La méthode INDO donne des résultats moins bons que les calculs CNDO/2. Le spectre du cyclopropane en phase gazeuse est étudié comme exemple de l'applicabilité de la méthode des orbitales moléculaires au calcul des intensités relatives infra-rouge.

     

Disposable multichannel immunosensors for 2,4-dichlorophenoxyacetic acid using acetylcholinesterase as an enzyme label

An improved version of the disposable multichannel immunochemical biosensor for the herbicide 2,4-dichlorophenoxyacetic acid (2,4-D) based on a screen-printed amperometric transducer and monoclonal antibodies (MAb) against 2,4-D is reported. Entrapment within a thin Nafion film was used for the direct immobilization of MAb at the electrode surface. The amount of the tracer (2,4-D conjugated to acetylcholinesterase) bound in a competitive immunochemical reaction was determined amperometrically using acetylthiocholine iodide as substrate. The measuring procedure (times of incubation with tracer and substrate, pH, tracer concentration) was optimized. The sensor was able to detect less than 0.01 μg/L of free 2,4-D in water. One analysis (8 samples) was completed in 30 min (20 min for immunochemical reaction, 5 min incubation with substrate, 5 min measurement). The performance of the immunosensor (two configurations) was evaluated on real samples (tap water) with added 2,4-D. The determined amounts (mean values 0.097 to 0.105 and 0.89 to 1.13) corresponded well with the added contents of 2,4-D (0.100 and 1.00 μg/L, respectively).     

121Sb-Mössbauer-Spektren von Antimon(V)-Verbindungen. II

¹²¹Sb Mössbauer Spectra of Antimony (V) Compounds. II The Mössbauer resonance effect of ¹²¹Sb has been studied at 4.2 K in a series of 11 antimony(V) compounds which are in most cases bridged. Isomer shift and quadrupole splitting variations are considered in the light of results of X-ray and vibrational spectroscopy. Preparation and the vibrational spectra of [NMe₄][SbCl₄(n₃)₂] are described. Within the limitations of available structural data related tin compounds are compared with those of corresponding ¹¹⁹Sn Mössbauer spectra.     

Periodic,multiplicative number-theoretical functions

D. Leitmann andD. Wolke [3] proved that multiplicative functions, which are restrictions of continuous, periodic functionsF: with irrational period, are constant equal to 0 or 1. In this note a simpler proof for this result is given.     

A comparison of two approaches to the optimal positioning of a new product in an attribute space

This paper is concerned with the optimal positioning of a new product in an attribute space. A deterministic optimization model that relies on the axiom of choice is compared with the model byShocker/Srinivasan [1974] that incorporates a probabilistic measure of choice. Investigating the assumptions and the construction of both models, it is shown that the probability function byShocker/Srinivasan is based on a controversial assumption and incorporates a parameter that has not been given an economic explanation. Furthermore, both models are applied to complex configurations. It is demonstrated that the optimal positions for the new product resulting from the model byShocker/Srinivasan depend heavily on the parameter just mentioned and may run contrary to plausible consequences of the axiom of choice.

---

Zusammenfassung Für die optimale Gestaltung neuer Produkte, d.h. ihrer Positionierung in einem Raum von Produkteigenschaften, wird ein Modell angeboten, das auf einer deterministischen Kaufentscheidung beruht, ein anderes, das eine stochastische Kaufentscheidung unterstellt. Es wird gezeigt, daß der zuletzt genannte Modelltyp stark von der Spezifikation eines ökonomisch bisher nicht erklärten Parameters abhängt und z.T. Konsequenzen aufweist, die dem Wahlaxiom zuwider laufen, auf das das erstgenannte Modell aufbaut. Durch einen Vergleich auch komplexer Konfigurationen von Käuferbeurteilungen neuer Produkte wird gezeigt, welche Gestaltungsentscheidungen auf der Grundlage der beiden Modelle zur Optimierung einer Zielfunktion zu treffen sind.

     

On the Fourier transformation on spaces of (p,q)-multipliers

LetG denote a locally compact abelian topological group. The aim of the present paper is to prove an “intermediate” result between two well-known results ofL. Hörmander andG. I. Gaudry concerning the structure of the spaces ?_G?μ?t ^p,q (G).     

The relation between deep trapping levels and the structure of Se layers

Using electron microscopy methods it has been determined that there are numerous crystalline inclusions in evaporated layers of amorphous selenium. The density, dimensions, modification and distribution in the cross section of a layer are essentially dependent upon the method of layer preparation. The maximum micro-inclusion density is observed in layers evaporated at a substrate temperature (t_s) between 8 to 30°C. These layers also possess crystallites of monoclinic modification. In layers evaporated at t_s ? 50°C inclusions of trigonal modification prevail.The parameters of the deep trapping levels for holes and electrons have been determined from photodischarge kinetics. The origin of these levels is found to be related to the phase transition. The hole traps are caused by the crystalline formation of trigonal modification, and the electron traps by crystallites of monoclinic modification.     

An Experimental Study of a Flux Modulated Solid State Metathesis Reaction

A solid state metathesis (SSM) reaction was investigated with respect to the formation of rare‐earth carbodiimides, the role of the co‐produced salt (LiCl), and the eutectic flux medium (LiCl/KCl). A SSM reaction is characterized by an exothermic reaction in which a salt (often LiCl) is coproduced. When the salt melts, it can serve as a useful medium for the crystallization of a desired product. An improved crystal growth can be observed by using an eutectic flux. However, the composition of an eutectic LiCl/KCl flux is altered when LiCl is produced during the reaction. The thermal effects concerning the endothermic melting of the flux and the exothermic ingnition of the SSM reaction may compensate each other, which is not necessarily a drawback for the reaction to proceed.