Living fungal hyphae-templated porous gold microwires using nanoparticles as building blocks

Abstract  

A simple and environmentally benign green method is reported to decorate growing fungal hyphae with high loading of gold nanoparticles, which were initially produced using aqueous tea extract as a sole reducing/stabilizing agent. Inoculation of fungal spores in aqueous suspension of nanoparticles led to the growth of intensely red-coloured fungal hyphae due to the accumulation of gold nanoparticles. Heat treatment of these hybrid materials led to the formation of porous gold microwires. This report is thus an interesting example of using green and sustainable approach to produce nanostructured materials which have potential applications in catalysis, sensing and electronics.     

Direct current and impedance spectroscopic studies on MoO3 modified ZnPc/ITO Schottky diodes

We use experimental results of direct current and low signal impedance spectroscopy to investigate the conduction mechanism in organic semiconductor ZnPc. The experimental results demonstrate an increase in current and holes mobility by the introduction of a thin MoO₃ film at the ITO/ZnPc interface. This significantly improves the device performance. The improvement is explained in terms of the reduction in the effective barrier for charge transfer from ZnPc to ITO.     

A microextraction procedure based on a task‐specific ionic liquid for the separation and preconcentration of lead ions from red lipstick and pine leaves

First, the extraction and preconcentration of ultratrace amounts of lead(II) ions was performed using microliter volumes of a task‐specific ionic liquid. The remarkable properties of ionic liquids were added to the advantages of microextraction procedure. The ionic liquid used was trioctylmethylammonium thiosalicylate, which formed a lead thiolate complex due to the chelating effect of the ortho‐positioned carboxylate relative to thiol functionality. So, trioctylmethylammonium thiosalicylate played the roles of both chelating agent and extraction solvent simultaneously. Hence, there is no need to use a ligand. The main parameters affecting the efficiency of the method were investigated and optimized. Under optimized conditions, this approach showed a linear range of 2.0–24.0 ng/mL with a detection limit of 0.0010 ng/mL. The proposed method was applied to the extraction and preconcentration of lead from red lipstick and pine leaves samples prior to electrothermal atomic absorption spectroscopic determination.     

Bacilli as Biological Nano-factories Intended for Synthesis of Silver Nanoparticles and Its Application in Human Welfare

The search of eco-friendly technologies for nano-synthesis is significant to expand their applications in human welfare. Nowadays, various inorganic nanoparticles with beneficial features have been synthesized via physical, chemical, and biological means. Significant biological applications of silver nanoparticles include on-infectious microbes, target drug delivery, cancer and vector-borne disease control. Their syntheses have been tested from plant fungi, bacteria, and viruses. The bacterial mediated synthesis of silver, gold, zinc and other metal leads to a milestone in nano-medicines. Thus, in this review, we focus on the contribution of Bacilli in the synthesis of silver nanoparticles, the mechanism of action and their potential application in the welfare of human beings.     

Synthesis of new fluorescently labeled glycosylphosphatidylinositol (GPI) anchors

The borondipyrromethene (BODIPY) labeled new glycosylphosphatidylinositol (GPI) molecules were synthesized as cellular probes to study the chemical basis of microdomain organization of GPI-anchored proteins and cholesterol in plasma membrane. The synthesis enabled by a new stereo-selective glycosylation of myo-d-inositol acceptor led to the preparation of optically pure glucosaminyl-(1-6)-α-phosphatidyl-myo-d-inositol and its unnatural stereoisomer.     

Mesoporous silicabis(ethylsulfanyl)propane palladium catalysts for hydrogenation and one-pot two-step Suzuki cross-coupling followed by hydrogenation

The solid phase catalytic activity of mesoporous silicabis(ethylsulfanyl)propane palladium catalysts for hydrogenation and novel one-pot two-step Suzuki cross-coupling followed by hydrogenation is described. The efficiency of catalytic hydrogenation was measured for substrate nitrobenzene with 5, 7 and 14 nm average pore diameter materials. The 5 nm pore material performed best and was also very effective in the catalytic hydrogenation of alkene, nitrile and imine substrates. Novel one-pot two-step Suzuki cross-coupling and hydrogenation was demonstrated using bromonitro- and bromodinitrobenzene and phenylboronic acid as substrates with conversion to the corresponding coupled amino compounds. As a consequence of the high affinity of the sulfur ligands for palladium, none was detected in leaching tests and the catalyst is easily separated and recycled.     

Conformal upper bounds for the eigenvalues of the Laplacian and Steklov problem

In this paper, we find upper bounds for the eigenvalues of the Laplacian in the conformal class of a compact Riemannian manifold (M,g). These upper bounds depend only on the dimension and a conformal invariant that we call “min-conformal volume”. Asymptotically, these bounds are consistent with the Weyl law and improve previous results by Korevaar and Yang and Yau. The proof relies on the construction of a suitable family of disjoint domains providing supports for a family of test functions. This method is interesting for itself and powerful. As a further application of the method we obtain an upper bound for the eigenvalues of the Steklov problem in a domain with C¹ boundary in a complete Riemannian manifold in terms of the isoperimetric ratio of the domain and the conformal invariant that we introduce.     

An easily accessible Re-based catalyst for the selective conversion of methanol: evidence for an unprecedented active site structure through combined operando techniques

Heterogeneous Re/SiO(2) catalysts prepared using a one pot sol-gel synthesis were found to display high activity in the direct, selective methanol conversion to methylal, which is correlated to an unprecedented rhenium oxide structure.     

The formation of novel 1,3-dioxolanes: atypical Baylis-Hillman reaction of a sesquiterpene lactone parthenin

The Baylis-Hillman reaction of a sesquiterpene lactone parthenin with various aldehydes gave unexpected products containing a 1,3-dioxolane moiety. Both small aliphatic and aromatic aldehydes produced 1,3-dioxolanes, whereas higher aliphatic aldehydes produced normal Baylis-Hillman products.     

An Improved Hybrid Adjoint Method in External Aerodynamics Using Variational Technique for the Boundary Integral Based Optimal Objective Function Gradient

An improved hybrid adjoint method to the viscous, compressible Reynold-Averaged Navier-Stokes Equation (RANS) is developed for the computation of objective function gradient and demonstrated for external aerodynamic design optimization. In this paper, the main idea is to extend the previous coupling of the discrete and continuous adjoint method by the grid-node coordinates variation technique for the computation of the variation in the gradients of flow variables. This approach in combination with the Jacobian matrices of flow fluxes refrained the objective function from field integrals and coordinate transformation matrix. Thus, it opens up the possibility of employing the hybrid adjoint method to evaluate the subsequent objective function gradient analogous to many shape parameters, comprises of only boundary integrals. This avoids the grid regeneration in the geometry for every surface perturbation in a structured and unstructured grid. Hence, this viable technique reduces the overall CPU cost. Moreover, the new hybrid adjoint method has been successfully applied to the computation of accurate sensitivity derivatives. Finally, for the investigation of the presented numerical method, simulations are carried out on NACA0012 airfoil in a transonic regime and its accuracy and effectiveness related to the new gradient equation have been verified with the Finite Difference Method (FDM). The analysis reveals that the presented methodology for the optimization provides the designer with an indispensable CPU-cost effective tool to reshape the complex geometry airfoil surfaces, useful relative to the state-of-the-art, in a less computing time.